Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

By always defining these symbols, we can eliminate a lot of ifdefs.

To allow this to be checked reliably, the semantics of the
TCG_TARGET_HAS_* macros must be changed from def/undef to true/false.
This allows even more ifdefs to be removed, converting them into
C if statements.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This allows the simplification of the op_bits function from
tcg/optimize.c.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

OpenBSD / FreeBSD and some other OS's require the use of
cc -pthread to link threaded programs so have QEMU's
configure script check for the presence of the flag
and use it if so.
Signed-off-by: NBrad Smith <brad@comstyle.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

7267c094 missed
a few cases, fix them.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Previously, "info mem" considered and displayed only the last-level
protection bits for a memory range, which doesn't accurrately
represent the protection of that range.  Now it shows the combined
protection.
Signed-off-by: NAustin Clements <amdragon@mit.edu>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

"info mem" groups its output into contiguous ranges with identical
protection bits, but previously forgot to print the last range.
Signed-off-by: NAustin Clements <amdragon@mit.edu>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Previously, on 32-bit i386, info mem used signed 32-bit int's to store
the page table indexes.  As a result, address calculation was done in
32 bits and then incorrectly sign-extended to 64 bits, yielding output
like

ffffffffef000000-ffffffffef031000 0000000000031000 ur-
ffffffffef7bc000-ffffffffef7bd000 0000000000001000 urw
ffffffffef7bd000-ffffffffef7be000 0000000000001000 ur-

This makes these indexes unsigned, which yields correct output

00000000ef000000-00000000ef031000 0000000000031000 ur-
00000000ef7bc000-00000000ef7bd000 0000000000001000 urw
00000000ef7bd000-00000000ef7be000 0000000000001000 ur-
Signed-off-by: NAustin Clements <amdragon@mit.edu>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit 953ffe0f
introduced FMT_pid which is wrong for w32 and w64 getpid():
those getpid() implementations always return an int value.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

For mingw-w64, pid_t is _pid_t which is __int64,
so this platform needs its own definition of FMT_pid.
Reviewed-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long.

These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.

See 4b4a72e5 which fixed the
same issue for the other targets.

Cc: Alexander Graf <agraf@suse.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Guan Xuetao<gxt@mprc.pku.edu.cn>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This covers the various check commands
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Derived from a patch submitted by Avi Kivity.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

qemu_malloc/qemu_free no longer exist after this commit.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

code_gen_alloc depends on it, and that is now called earlier via
configure_accelerator.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The variable 'status' does not exist anymore, adjust DPRINTF
accordingly.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The REG_PC constant used in opcode-cris.h can clash with a
similar define in system include files. In particular the
Ubuntu Lucid SPARC signal.h will define REG_PC, and since
qemu-common.h now includes signal.h this was causing compile
failures. Rename the constants to avoid this issue.
(NB that REG_SP is not actually used within QEMU.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Other scsi_target_reqops commands were careful about not using r->cmd.xfer
directly, and instead always cap it to a fixed length.  This was not done
for REQUEST SENSE, and this patch fixes it.
Reported-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't use req before it has been initialised in scsi_req_new().
This fixes a compile failure due to gcc complaining about this.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fixes a build issue on RHEL5, and potentially other distros, where gcc
will generate an error due to us not writing a trailing "\n" when
generating *qmp-commands.h
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Noted by Drew Jones.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

ROM/device regions act as mapped RAM for reads, can I/O memory for
writes.  This allow emulation of flash devices.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch fixes build when any of the include paths from QEMU_CFLAGS
contains a header file with similar name to a header file in qemu
sources. I hit it with error.h included by qapi/qapi-types-core.h. GCC
decided to use /usr/include/alsa/error.h instead of qemu's error.h.
Tested-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

guest_agent is not supported for mingw32, so the default value
should be 'no', not 'yes'.

This removes the dependencies to glib-2.0 and python which
makes native and cross builds for w32 much easier (no need
to get and install these extra packages).

It also avoids the problems caused by different bitfield alignment
which is required by glib-2.0.

It is still possible to set guest_agent=yes via configure option.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Can be useful when debugging the device scan phase.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Unit attention conditions override any sense data the device already
has.  Their signaling and clearing is handled entirely by the SCSIBus
code, and they are completely transparent to the SCSIDevices.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Also introduce the first occurrence of "independent" SCSIReqOps,
to handle invalid commands in common code.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This will let SCSIBus detect requests sent to an invalid LUN, and
handle them itself.  However, there will be still support for only one
LUN per target
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This struct is currently unnamed.  Give it a name and use it
explicitly to decouple (some parts of) CDB parsing from
SCSIRequest.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Right now the CDB is not passed to the SCSIBus until scsi_req_enqueue.
Passing it to scsi_req_new will let scsi_req_new dispatch common requests
through different reqops.

Moving the memcpy to scsi_req_new is a hack that will go away as
soon as scsi_req_new will also take care of the parsing.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This will let allow requests to be dispatched through different callbacks,
either common or per-device.

This patch adjusts the API, the next one will move members to SCSIReqOps.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>