virtio-blk-pci, virtio-blk-s390, and virtio-blk-ccw all duplicate the
qdev properties of their VirtIOBlock child.  This approach does not work
well with string or pointer properties since we must be careful about
leaking or double-freeing them.

Use the QOM alias property to forward property accesses to the
VirtIOBlock child.  This way no duplication is necessary.

Remember to stop calling virtio_blk_set_conf() so that we don't clobber
the values already set on the VirtIOBlock instance.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

The qdev_alias_all_properties() function creates QOM alias properties
for each qdev property on a DeviceState.  This is useful for parent
objects that wish to forward property accesses to their children.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

Move the x-data-plane property.  Originally it was outside since not
every transport may wish to support dataplane.  But that makes little
sense when we have a dedicated CONFIG_VIRTIO_BLK_DATA_PLANE ifdef
already.

This move makes it easier to switch to property aliases in the next
patch.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

If the virtio transport does not support notifiers (like s390-virtio),
we can't use dataplane. Bail out early and let the user know what is
wrong.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

io-error is for block device errors; it should always be preceded
by a BLOCK_IO_ERROR event.  I think vfio wants to use
RUN_STATE_INTERNAL_ERROR instead.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Slow BAR access path is used when VFIO fails to mmap() BAR.
Since this is just a transport between the guest and a device, there is
no need to do endianness swapping.

This changes BARs to use native endianness. Since non-ROM BARs were
doing byte swapping, we need to remove it so does the patch.
As the result, this eliminates cancelling byte swaps and there is
no change in behavior for non-ROM BARs.

ROM BARs were declared little endian too but byte swapping was not
implemented for them so they never actually worked on big endian systems
as there was no cancelling byte swap. This fixes endiannes for ROM BARs
by declaring them native endian and only fixing access sizes as it is
done for non-ROM BARs.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

There are still old guests out there that over-exercise MSI-X masking.
The current code completely sets-up and tears-down an MSI-X vector on
the "use" and "release" callbacks.  While this is functional, it can
slow an old guest to a crawl.  We can easily skip the KVM parts of
this so that we keep the MSI route and irqfd setup.  We do however
need to switch VFIO to trigger a different eventfd while masked.
Actually, we have the option of continuing to use -1 to disable the
trigger, but by using another EventNotifier we can allow the MSI-X
core to emulate pending bits and re-fire the vector once unmasked.
MSI code gets updated as well to use the same setup and teardown
structures and functions.

Prior to this change, an igbvf assigned to a RHEL5 guest gets about
20Mbps and 50 transactions/s with netperf (remote or VF->PF).  With
this change, we get line rate and 3k transactions/s remote or 2Gbps
and 6k+ transactions/s to the PF.  No significant change is expected
for newer guests with more well behaved MSI-X support.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Use the correct MSI message function for debug info.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

On FreeBSD polling a master pty while the other end is not connected
with G_IO_OUT only results in an endless wait. This is different from
the Linux behaviour, that returns immediately. In order to demonstrate
this, I have the following example code:

http://xenbits.xen.org/people/royger/test_poll.c

When executed on Linux:

$ ./test_poll
In callback

On FreeBSD instead, the callback never gets called:

$ ./test_poll

So, in order to workaround this, poll the source with G_IO_HUP (which
makes the code behave the same way on both Linux and FreeBSD).
Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: xen-devel@lists.xenproject.org
[Add hw/char/cadence_uart.c too. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

SysBusDevice::init is deprecated. Convert to instance_init
as prescribed by QOM conventions.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1223f14833159b9ea5c57734dd2ffa88d4b15a83.1403583596.git.alistair.francis@xilinx.com
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The pxa2xx-gpio device has a VMStateDescription, but it was accidentally
never actually registered, and it wasn't quite correct. Remove the
'lines' field (this is a device property, not mutable state), add the
missing 'prev_level' field, and set dc->vmsd so it actually gets used.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

The PXA2xx GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

The VMStateDescription structs for the GPIO and PPC devices were
accidentally never wired up. Add missing state fields and register
them via dc->vmsd.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

The StrongARM GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

UEFI mandates that the platform must include an RTC, so provide
one in 'virt', using the PL031. This is also useful for directly
booting Linux kernels which would otherwise have to run ntpdate.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>

As of today, vhost assumes guest and host have the same endianness.
This is definitely not compatible with modern PPC64 and ARM that
can change endianness at runtime. Let's disable vhost-net and print
an error message when we detect such a case:

qemu-system-ppc64: vhost-net does not support cross-endian
qemu-system-ppc64: unable to start vhost net: 38: falling back on userspace virtio

This way users can continue to run VMs without changing their setup and
have a chance to know that performance will be impacted.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We also fix max_nr_ports at reset time as the device endianness may have
changed.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
  fix max_nr_ports at reset time,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
  converted new tswap locations to virtio_tswap,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
  converted new tswap locations to virtio_tswap,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Quoting original text from Rusty: "This is based on a simpler patch by Anthony
Liguouri".
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
[ add VirtIODevice * argument to most helpers,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Some CPU families can dynamically change their endianness. This means we
can have little endian ppc or big endian arm guests for example. This has
an impact on legacy virtio data structures since they are target endian.
We hence introduce a new property to track the endianness of each virtio
device. It is reasonnably assumed that endianness won't change while the
device is in use : we hence capture the device endianness when it gets
reset.

We migrate this property in a subsection, after the device descriptor. This
means the load code must not rely on it until it is restored. As a consequence,
the vring sanity checks had to be moved after the call to vmstate_load_state().
We enforce paranoia by poisoning the property at the begining of virtio_load().
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We currently have a virtio_is_big_endian() helper that provides the target
endianness to the virtio code. As of today, the helper returns a fixed
compile-time value. Of course, this will have to change if we want to
support target endianness changes at run-time.

Let's move the TARGET_WORDS_BIGENDIAN bits out to a new helper and have
virtio_is_big_endian() implemented on top of it.

This patch doesn't change any functionality.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

There is a need to add some more fields to VirtIODevice that should be
migrated (broken status, endianness). The problem is that we do not
want to break compatibility while adding a new feature... This issue has
been addressed in the generic VMState code with the use of optional
subsections. As a *temporary* alternative to port the whole virtio
migration code to VMState, this patch mimics a similar subsectionning
ability for virtio, using the VMState code.

Since each virtio device is streamed in its own section, the idea is to
stream subsections between the end of the device section and the start
of the next sections. This allows an older QEMU to complain and exit
when fed with subsections:

Unknown savevm section type 5
load of migration failed
Suggested-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

While we are here, we also check virtio_load() return value.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

In order to migrate virtio subsections, they should be streamed after
the device itself. We need the device specific code to be called from
the common migration code to achieve this. This patch introduces load
and save methods for this purpose.
Suggested-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The device configuration is set at realize time and never changes. It
should not be migrated as it is done today. For the sake of compatibility,
let's just skip them at load time.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[ added missing casts to uint16_t *,
  added From, SoB and commit message,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

TCP connectivity fails when the guest has a different endianness.
The packets are silently dropped on the host by the tap backend
when they are read from user space because the endianness of the
virtio-net header is in the wrong order. These lines may appear
in the guest console:

[  454.709327] skbuff: bad partial csum: csum=8704/4096 len=74
[  455.702554] skbuff: bad partial csum: csum=8704/4096 len=74

The issue that got first spotted with a ppc64le PowerKVM guest,
but it also exists for the less common case of a x86_64 guest run
by a big-endian ppc64 TCG hypervisor.
Signed-off-by: NCédric Le Goater <clg@fr.ibm.com>
[ Ported from PowerKVM,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Old code was affected by memory gaps which resulted in buffer pointers
pointing to address outside of the mapped regions.

Here we are introducing following changes:
 - new function qemu_get_ram_block_host_ptr() returns host pointer
   to the ram block, it is needed to calculate offset of specific
   region in the host memory
 - new field mmap_offset is added to the VhostUserMemoryRegion. It
   contains offset where specific region starts in the mapped memory.
   As there is stil no wider adoption of vhost-user agreement was made
   that we will not bump version number due to this change
 - other fileds in VhostUserMemoryRegion struct are not changed, as
   they are all needed for usermode app implementation
 - region data is not taken from ram_list.blocks anymore, instead we
   use region data which is alredy calculated for use in vhost-net
 - Now multiple regions can have same FD and user applicaton can call
   mmap() multiple times with the same FD but with different offset
   (user needs to take care for offset page alignment)
Signed-off-by: NDamjan Marion <damarion@cisco.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDamjan Marion <damarion@cisco.com>

Commit 'virtio: validate config_len on load' restricted config_len
loaded from the wire to match the config_len that the device had.

Unfortunately, there are cases where this isn't true, the one
we found it on was the wce addition in virtio-blk.

Allow mismatched config-lengths:
   *) If the version on the wire is shorter then fine
   *) If the version on the wire is longer, load what we have space
      for and skip the rest.

(This is mst@redhat.com's rework of what I originally posted)
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

QEMU 2.0 changed memory layout for isapc and pc-0.10 to pc-0.13.
This prevents migration from QEMU 1.7.0 for these
machine types when -m 3.5G is specified.

Paolo Bonzini asked that:

    smbios_legacy_mode = true;
    has_reserved_memory = false;
    option_rom_has_mr = true;
    rom_file_has_mr = false;

also be done.

Cc: qemu-stable@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDon Slutz <dslutz@verizon.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1334307Tested-by: N"Slutz, Donald Christopher" <dslutz@verizon.com>

It is necessary to reset RTC interrupt reinjection backlog if
guest time is synchronized via a different mechanism, such as
QGA's guest-set-time command.

Failing to do so causes both corrections to be applied (summed),
resulting in an incorrect guest time.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

For each compat property on PC_Q35_COMPAT_*, there are only two
possibilities:

 * If the device is never instantiated when using a machine other than
   pc-q35, then the compat property can be safely added to
   PC_COMPAT_*;
 * If the device can be instantiated when using a machine other than
   pc-q35, that means the other machines also need the compat property
   to be set.

That means we don't need separate PC_Q35_COMPAT_* macros at all, today.

The hpet.hpet-intcap case is interesting: piix and q35 do have something
that emulates different defaults, but the machine-specific default is
applied _after_ compat_props are applied, by simply checking if the
property is zero (which is the real default on the hpet code).

The hpet.hpet-intcap=0x4 compat property can (should?) be applied to
piix too, because 0x4 was the default on both piix and q35 before the
hpet-intcap property was introduced.

Now, if one day we change the default HPET intcap on one of the PC
machine-types again, we may want to introduce PC_{Q35,I440FX}_COMPAT
macros. But while we don't need that, we can keep the code simple.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Cc: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>