- 20 1月, 2010 40 次提交
-
-
由 Luiz Capitulino 提交于
So that it can be used by other subsystems. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
This commit enables the use of MSI interrupts for virtqueue notifications for ports. We use nr_ports + 1 (for control channel) msi entries for the ports, as only the in_vq operations need an interrupt on the guest. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
There's nothing target-dependent in the virtio-serial code so allow it to be compiled just once for all the targets. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
This commit adds a simple chardev-based serial port. Any data the guest sends is forwarded to the chardev and vice-versa. Sample uses for such a device can be obtaining info from the guest like the file systems used, apps installed, etc. for offline usage and logged-in users, clipboard copy-paste, etc. for online usage. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
The port 'id' or number is internal state between the guest kernel and our bus implementation. This is invocation-dependent and isn't part of the guest-host ABI. To correcly enumerate and map ports between the host and the guest, the 'name' property is used. Example: -device virtserialport,name=org.qemu.port.0 This invocation will get us a char device in the guest at: /dev/virtio-ports/org.qemu.port.0 which can be a symlink to /dev/vport0p3 This 'name' property is exposed by the guest kernel in a sysfs attribute: /sys/kernel/virtio-ports/vport0p3/name A simple udev script can pick up this name and create the symlink mentioned above. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
Via control channel messages, the guest can tell us whether a port got opened or closed. Similarly, we can also indicate to the guest of host port open/close events. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
This commit converts the virtio-console device to create a new virtio-serial bus that can host console and generic serial ports. The file hosting this code is now called virtio-serial-bus.c. The virtio console is now a very simple qdev device that sits on the virtio-serial-bus and communicates between the bus and qemu's chardevs. This commit also includes a few changes to the virtio backing code for pci and s390 to spawn the virtio-serial bus. As a result of the qdev conversion, we get rid of a lot of legacy code. The old-style way of instantiating a virtio console using -virtioconsole ... is maintained, but the new, preferred way is to use -device virtio-serial -device virtconsole,chardev=... With this commit, multiple devices as well as multiple ports with a single device can be supported. For multiple ports support, each port gets an IO vq pair. Since the guest needs to know in advance how many vqs a particular device will need, we have to set this number as a property of the virtio-serial device and also as a config option. In addition, we also spawn a pair of control IO vqs. This is an internal channel meant for guest-host communication for things like port open/close, sending port properties over to the guest, etc. This commit is a part of a series of other commits to get the full implementation of multiport support. Future commits will add other support as well as ride on the savevm version that we bump up here. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
VIRTIO_PCI_QUEUE_MAX is redefined in hw/virtio.c. Let's just keep it in hw/virtio.h. Also, bump up the value of the maximum allowed virtqueues to 64. This is in preparation to allow multiple ports per virtio-console device. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Naphtali Sprei 提交于
Signed-off-by: NNaphtali Sprei <nsprei@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Naphtali Sprei 提交于
Signed-off-by: NNaphtali Sprei <nsprei@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Naphtali Sprei 提交于
Clean-up a little bit the RW related bits of BDRV_O_FLAGS. BDRV_O_RDONLY gone (and so is BDRV_O_ACCESS). Default value for bdrv_flags (0/zero) is READ-ONLY. Need to explicitly request READ-WRITE. Instead of using the field 'readonly' of the BlockDriverState struct for passing the request, pass the request in the flags parameter to the function. Signed-off-by: NNaphtali Sprei <nsprei@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Naphtali Sprei 提交于
Signed-off-by: NNaphtali Sprei <nsprei@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
The command line options -device, -nodefaults, -readconfig, -writeconfig had entries for command line help, but documentation for texi and derived formats (man, html, info) was missing. This also required moving "@end table" to the end of qemu-options.hx again. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch adds compat property entries for ide-disk.ver and scsi-disk.ver to pc-0.10 and pc-0.11. With this patch applied the scsi and ide disks report "0.10" and "0.11" as version when you start qemu with "-M pc-0.10" or "-M pc-0.11". Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch adds a new property named 'ver' to scsi-disk which allows to specify the version which the virtual disk/cdrom should report to the guest. By default this is the qemu version (i.e. 0.12). usage: -drive if=none,id=disk,file=... -device lsi -device scsi-disk,drive=disk,bus=scsi.0,unit=0,ver=42 You can also switch the version for all scsi drives using: -global scsi-disk.ver=42 Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch adds a new property named 'ver' to ide-drive which allows to specify the version which the virtual disk/cdrom should report to the guest. By default this is the qemu version (i.e. 0.12). usage: -drive if=none,id=disk,file=... -device ide-drive,bus=ide.0,unit=0,drive=disk,ver=42 You can also switch the version for all ide drives using: -global ide-drive.ver=42 Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Adam Litke 提交于
When using a control/QMP monitor in tandem with a regular monitor, asynchronous messages can get lost depending on the order of the QEMU program arguments. QEMU events issued by monitor_protocol_event() always go to cur_mon. If the user monitor was specified on the command line first (or it has ,default), the message will be directed to the user monitor (not the QMP monitor). Additionally, only one QMP session is currently able to receive async messages. To avoid this confusion, scan through the list of monitors and emit the message on each QMP monitor. Signed-off-by: NAdam Litke <agl@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
Since commit 747bbdf7 QEMU_WARN_UNUSED_RESULT is never defined as it is conditional on a define from config-host.h which is included only later. Include that file earlier to get the warnings back. Reactivating it unfortunately leads to some warnings about unused qdev_init results. These calls are changed to qdev_init_nofail to avoid build failures. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
It's emitted when a VNC client session is activated by QEMU, client's information such as port, IP and auth ID (if the session is authenticated) are provided. Event example: { "event": "VNC_INITIALIZED", "timestamp": {"seconds": 1263475302, "microseconds": 150772}, "data": { "server": { "auth": "sasl", "family": "ipv4", "service": "5901", "host": "0.0.0.0"}, "client": { "family": "ipv4", "service": "46089", "host": "127.0.0.1", "sasl_username": "lcapitulino" } } } Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
It's emitted when a VNC client disconnects from QEMU, client's information such as port and IP address are provided. Event example: { "event": "VNC_DISCONNECTED", "timestamp": { "seconds": 1262976601, "microseconds": 975795 }, "data": { "server": { "auth": "sasl", "family": "ipv4", "service": "5901", "host": "0.0.0.0" }, "client": { "family": "ipv4", "service": "58425", "host": "127.0.0.1", "sasl_username": "foo" } } } Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
It's emitted when a VNC client connects to QEMU, client's information such as port and IP address are provided. Note that this event is emitted right when the connection is established. This means that it happens before authentication procedure and session initialization. Event example: { "event": "VNC_CONNECTED", "timestamp": { "seconds": 1262976601, "microseconds": 975795 }, "data": { "server": { "auth": "sasl", "family": "ipv4", "service": "5901", "host": "0.0.0.0" }, "client": { "family": "ipv4", "service": "58425", "host": "127.0.0.1" } } } Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
When a disconnection happens the client's socket on QEMU side may become invalid, this way it won't be possible to query it to get client information, which is going to be needed by the future QMP VNC_DISCONNECTED event. To always have this information available we query the socket at connection time and cache the client info in struct VncState. Two function are introduced to perform this job. vnc_client_cache_addr() is called right when the connection is made, however the authentication information is not available at that moment so vnc_client_cache_auth() is called from protocol_client_init() to get auth info. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
It contains the socket adress family name, like "ipv4" or "ipv6". This is useful for clients so that they can interpret the 'host' key reliably. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
It's the SASL username, so it's better to call it 'sasl_username' to be consistent. Note that this change wouldn't be allowed if QMP were stable. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
There is no reason to have it as optional and the code in the server and client gets slightly simpler if the key is mandatory. While there also do some cleanup on how the server info is collected. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Currently the 'status' key is a string whose value can be "disabled" or "enabled", change it to the QMP's standard 'enabled' key, which is a bool. Note that 'status' in being dropped and this wouldn't be allowed if QMP were stable. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kusanagi Kouichi 提交于
qemu_chr_open_fd() calls qemu_chr_generic_open(), so qemu_chr_open_tty() doesn't need to call it. Signed-off-by: NKusanagi Kouichi <slash@ac.auone-net.jp> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Cole Robinson 提交于
Current legacy floppy detection is hardcoded based on source file name. Make this smarter on linux by attempting a floppy specific ioctl. v2: Give ioctl check higher priority than filename check s/IDE/legacy/ v3: Actually initialize 'prio' variable Check for ioctl success rather than absence of specific failure v4: Explicitly mention that change is linux specific. Signed-off-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Cole Robinson 提交于
Current CDROM detection is hardcoded based on source file name. Make this smarter on linux by attempting a CDROM specific ioctl. This makes '-cdrom /dev/sr0' succeed with no media present. v2: Give ioctl check higher priority than filename check. v3: Actually initialize 'prio' variable. Check for ioctl success rather than absence of specific failure. v4: Explicitly mention that change is linux specific. Signed-off-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
The while loop will be executed exactly 0 or 1 times, depending on env->exit_request. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
By virtue of the previous patch env->current_tb will always be NULL at the top of cpu_exec's outermost for loop, and at the end of the innermost while loop. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
There are three paths from the innermost while loop of cpu_exec to the top of the outermost for loop. Two do not reset env->current_tb. Fix this. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
These are unused since edea5f01 (no need to define global registers in cpu-exec.c, 2008-05-10). Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Igor V. Kovalenko 提交于
Currently we do not implement VLAN tagging for rtl8139(C+), still data is read from ring buffer headers. - augment unused assignment with TODO item - cast txdw1 to void for now Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
* Handling of multicast list was missing. * Multicast all was missing. * Promiscuous mode for multicast frames was wrong. This patch is a step to synchronize my maintainer version of eepro100.c (git://repo.or.cz/qemu/ar7.git) with the version integrated in QEMU. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-