Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361580039-4459-4-git-send-email-dwmw2@infradead.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361580039-4459-3-git-send-email-dwmw2@infradead.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Define and use I440FX_PCI_DEVICE() instead of using DO_UPCAST().
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1361580039-4459-2-git-send-email-dwmw2@infradead.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Linux uses the lowest enslaved MAC address as the MAC address of
the bridge.  Set MAC address to a high value so that it does not
affect the MAC address of the bridge.

Changing the MAC address of the bridge could cause a few seconds
of network downtime.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1363971468-21154-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The qdev field is no longer needed, just drop it.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As the virtio-balloon-pci is switched to the new API, we can use QOM
casts.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This remove old init and exit function as they are no longer needed.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-balloon-ccw is modified for the new API. The device
virtio-balloon-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-balloon during the init. The properties are not modified.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-balloon-pci is modified for the new API. The device
virtio-balloon-pci extends virtio-pci. It creates and connects a
virtio-balloon during the init. The properties are not changed.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Create virtio-balloon which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Kevin Wolf (22) and Peter Lieven (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
  block: Fix direct use of protocols as driver for bdrv_open()
  qcow2: Gather clusters in a looping loop
  qcow2: Move cluster gathering to a non-looping loop
  qcow2: Allow requests with multiple l2metas
  qcow2: Use byte granularity in qcow2_alloc_cluster_offset()
  qcow2: Prepare handle_alloc/copied() for byte granularity
  qcow2: handle_copied(): Implement non-zero host_offset
  qcow2: handle_copied(): Get rid of keep_clusters parameter
  qcow2: handle_copied(): Get rid of nb_clusters parameter
  qcow2: Factor out handle_copied()
  qcow2: Clean up handle_alloc()
  qcow2: Finalise interface of handle_alloc()
  qcow2: handle_alloc(): Get rid of keep_clusters parameter
  qcow2: handle_alloc(): Get rid of nb_clusters parameter
  qcow2: Factor out handle_alloc()
  qcow2: Decouple cluster allocation from cluster reuse code
  qcow2: Change handle_dependency to byte granularity
  qcow2: Improve check for overlapping allocations
  qcow2: Handle dependencies earlier
  qcow2: Remove bogus unlock of s->lock
  ...

# By Lluís Vilanova (7) and others
# Via Stefan Hajnoczi
* stefanha/tracing:
  vl: add runstate_set tracepoint
  .gitignore: rename trace/generated-tracers.dtrace
  .gitignore: add trace/generated-events.[ch]
  trace: rebuild generated-events.o when configuration changes
  trace: [stderr] Port to generic event information and new control interface
  trace: [simple] Port to generic event information and new control interface
  trace: [default] Port to generic event information and new control interface
  trace: [monitor] Use new event control interface
  trace: Provide a detailed event control interface
  trace: Provide a generic tracing event descriptor
  trace: [tracetool] Explicitly identify public backends

This patch enables us to know RunState transition. It will be userful
for investigation when the trouble occured in special event such like
live migration, shutdown, suspend, and so on.
Signed-off-by: NKazuya Saito <saito.kazuya@jp.fujitsu.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

For a while the file was called trace/generated-tracers-dtrace.dtrace
but today it's called trace/generated-tracers.dtrace.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Don't display autogenerated files in git-status(1).
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Make sure to rebuild generated-events.o when ./configure options change.
This prevents linker errors when a stale generated-events.o gets linked
with code compiled against fresh headers.  For example, try building
with ./configure --enable-trace-backend=stderr followed by ./configure
--enable-trace-backend=dtrace.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The backend is forced to dump event numbers using 64 bits, as TraceEventID is
an enum.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This interface decouples event obtaining from interaction.

Events can be obtained through three different methods:

* identifier
* name
* simple wildcard pattern
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Uses tracetool to generate a backend-independent tracing event description
(struct TraceEvent).

The values for such structure are generated with the non-public "events"
backend ("events-c" frontend).

The generation of the defines to check if an event is statically enabled is also
moved to the "events" backend ("events-h" frontend).
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Public backends are those printed by "--list-backends" and thus considered valid
by the configure script.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

bdrv_open_common() implements direct use of protocols by copying the
pre-opened BlockDriverStates to bs using bdrv_swap(). It did however
first set some fields in bs, which end up in file after the swap. When
bdrv_open() destroys file, it appears to be open, and because it isn't,
qemu could segfault while trying to close it.

Reorder the operations to return immediately in such cases so that file
is correctly detected as closed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Instead of just checking once in exactly this order if there are
dependendies, non-COW clusters and new allocation, this starts looping
around these. This way we can, for example, gather non-COW clusters after
new allocations as long as the host cluster offsets stay contiguous.

Once handle_dependencies() is extended so that COW areas of in-flight
allocations can be overwritten, this allows to continue with gathering
other clusters (we wouldn't be able to do that without this change
because we would have missed a possible second dependency in one of the
next clusters).

This means that in the typical sequential write case, we can combine the
COW overwrite of one cluster with the allocation of the next cluster as
soon as something like Delayed COW gets actually implemented. It is only
by avoiding splitting requests this way that Delayed COW actually starts
improving performance noticably.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch is mainly to separate the indentation change from the
semantic changes. All that really changes here is that everything moves
into a while loop, all 'goto done' become 'break' and at the end of the
loop a new 'break is inserted.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Instead of expecting a single l2meta, have a list of them. This allows
to still have a single I/O request for the guest data, even though
multiple l2meta may be needed in order to describe both a COW overwrite
and a new cluster allocation (typical sequential write case).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This gets rid of the nb_clusters and keep_clusters and the associated
complicated calculations. Just advance the number of bytes that have
been processed and everything is fine.

This patch advances the variables even after the last operation even
though they aren't used any more afterwards to make things look more
uniform. A later patch will turn the whole thing into a loop and then
it actually starts making sense.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This makes handle_alloc() and handle_copied() return byte-granularity
host offsets instead of returning always the cluster start. This is
required so that qcow2_alloc_cluster_offset() can stop aligning
everything to cluster boundaries.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Look only for clusters that start at a given physical offset.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Now *bytes is used to return the length of the area that can be written
to without performing an allocation or COW.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

handle_copied() uses its bytes parameter now to determine how many
clusters it should try to find.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Things can be simplified a bit now. No semantic changes.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The interface works completely on a byte granularity now and duplicated
parameters are removed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

handle_alloc() is now called with the offset at which the actual new
allocation starts instead of the offset at which the whole write request
starts, part of which may already be processed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

We already communicate the same information in *bytes.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This moves some code that prepares the allocation of new clusters to
where the actual allocation happens. This is the minimum required to be
able to move it to a separate function in the next patch.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This is a more precise description of what really constitutes a
dependency. The behaviour doesn't change at this point because the COW
area of the old request is still aligned to cluster boundaries and
therefore an overlap is detected wheneven the requests touch any part of
the same cluster.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>