Before moving them all to include/qemu/xxhash.h.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Which we forgot to do in bd224fce ("qht-bench: add -p flag
to precompute hash values", 2018-09-26).
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

It's unused since 75e8b9b7.
Signed-off-by: NEmilio G. Cota <cota@braap.org>
Message-Id: <20181209193749.12277-9-cota@braap.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Instead of hard coding 31 for the shift right use TCG_TARGET_REG_BITS - 1.
Signed-off-by: NAlistair Francis <alistair.francis@wdc.com>
Message-Id: <7dfbddf7014a595150aa79011ddb342c3cc17ec3.1544648105.git.alistair.francis@wdc.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

For now, defined universally as true, since we previously required
backends to implement swapped memory operations.  Future patches
may now remove that support where it is onerous.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Somehow we forgot these operations, once upon a time.
This will allow immediate stores to have their bswap
optimized away.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Based on the only current user, Sparc:

New code uses 2 constants that take 2 insns to load from constant pool,
plus 13.  Old code used 6 constants that took 1 or 2 insns to create,
plus 21.  The result is a new total of 17 vs an old total of 29.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Based on the only current user, Sparc:

New code uses 1 constant that takes 2 insns to create, plus 8.
Old code used 2 constants that took 2 insns to create, plus 9.
The result is a new total of 10 vs an old total of 13.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Reviewed-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

These values are constant between all qemu_ld/st invocations;
there is no need to figure this out each time.  If we cannot
use a segment or an offset directly for guest_base, load the
value into a register in the prologue.
Reviewed-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

We now have an invariant that all TCG_TYPE_I32 values are
zero-extended, which means that we do not need to extend
them again during qemu_ld/st, either explicitly via a separate
tcg_out_ext32u or implicitly via P_ADDR32.
Reviewed-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

This preserves the invariant that all TCG_TYPE_I32 values are
zero-extended in the 64-bit host register.
Reviewed-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

This helps preserve the invariant that all TCG_TYPE_I32 values
are stored zero-extended in the 64-bit host registers.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

This helps preserve the invariant that all TCG_TYPE_I32 values
are stored zero-extended in the 64-bit host registers.
Reviewed-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

This does require an extra two checks within the slow paths
to replace the assert that we're moving.  Also add two checks
within existing functions that lacked any kind of assert for
out of range branch.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

The reloc_pc{14,24}_val routines retain their asserts.
Use these directly within the slow paths.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

This does require an extra two checks within the slow paths
to replace the assert that we're moving.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

This does require an extra two checks within the slow paths
to replace the assert that we're moving.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

This will move the assert for success from within (subroutines of)
patch_reloc into the callers.  It will also let new code do something
different when a relocation is out of range.

For the moment, all backends are trivially converted to return true.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

There is no longer a need for preserving branch offset operands,
as we no longer re-translate.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

There is no longer a need for preserving branch offset operands,
as we no longer re-translate.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

There is no longer a need for preserving branch offset operands,
as we no longer re-translate.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

There is no longer a need for preserving branch offset operands,
as we no longer re-translate.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

There are one use apiece for these.  There is no longer a need for
preserving branch offset operands, as we no longer re-translate.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

It is unused since 3fb53fb4.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

There are one use apiece for these.  There is no longer a need for
preserving branch offset operands, as we no longer re-translate.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

It is unused since b68686bd.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

For x86_64, this can remove a REX prefix resulting in smaller code
when manipulating globals of type i32, as we move them between backing
store via cpu_env, aka TCG_AREG0.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Partially reverts ab20bdc1.  The 14-bit displacement that we
allowed to reach the constant pool is not always sufficient.
Retain the tb-relative addressing, as that is how most return
values from the tb are computed.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Block layer patches:

- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)

# gpg: Signature made Fri 14 Dec 2018 10:55:09 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (42 commits)
  block/mirror: add missing coroutine_fn annotations
  iotests: make 235 work on s390 (and others)
  block: Assert that flags are up-to-date in bdrv_reopen_prepare()
  block: Remove assertions from update_flags_from_options()
  block: Stop passing flags to bdrv_reopen_queue_child()
  block: Remove flags parameter from bdrv_reopen_queue()
  block: Clean up reopen_backing_file() in block/replication.c
  qemu-io: Put flag changes in the options QDict in reopen_f()
  block: Drop bdrv_reopen()
  block: Use bdrv_reopen_set_read_only() in the mirror driver
  block: Use bdrv_reopen_set_read_only() in external_snapshot_commit()
  block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file()
  block: Use bdrv_reopen_set_read_only() in stream_start/complete()
  block: Use bdrv_reopen_set_read_only() in bdrv_commit()
  block: Use bdrv_reopen_set_read_only() in commit_start/complete()
  block: Use bdrv_reopen_set_read_only() in bdrv_backing_update_filename()
  block: Add bdrv_reopen_set_read_only()
  file-posix: Avoid aio_worker() for QEMU_AIO_IOCTL
  file-posix: Switch to .bdrv_co_ioctl
  file-posix: Remove paio_submit_co()
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

usb: fixes for mtp, ehci, usb-host and pvusb (xen).

# gpg: Signature made Fri 14 Dec 2018 10:38:33 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20181214-pull-request:
  usb-mtp: Limit filename to object information size
  usb-mtp: use O_NOFOLLOW and O_CLOEXEC.
  ehci: fix fetch qtd race
  usb-host: reset and close libusb_device_handle before qemu exit
  pvusb: set max grants only in initialise
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

QAPI patches for 2018-12-13

# gpg: Signature made Fri 14 Dec 2018 05:53:51 GMT
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2018-12-13-v2: (32 commits)
  qapi: add conditions to REPLICATION type/commands on the schema
  qapi: add more conditions to SPICE
  qapi: add condition to variants documentation
  qapi: add 'If:' condition to struct members documentation
  qapi: add 'If:' condition to enum values documentation
  qapi: Add #if conditions to generated code members
  qapi: add 'if' to alternate members
  qapi: add 'if' to union members
  qapi: Add 'if' to implicit struct members
  qapi: add a dictionary form for TYPE
  qapi-events: add 'if' condition to implicit event enum
  qapi: add 'if' to enum members
  qapi: add a dictionary form with 'name' key for enum members
  qapi: improve reporting of unknown or missing keys
  qapi: factor out checking for keys
  tests: print enum type members more like object type members
  qapi: change enum visitor and gen_enum* to take QAPISchemaMember
  qapi: Do not define enumeration value explicitly
  qapi: break long lines at 'data' member
  qapi: rename QAPISchemaEnumType.values to .members
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Most notable change in this PR is the full removal of the "handle" fsdev
backend.

# gpg: Signature made Wed 12 Dec 2018 13:20:42 GMT
# gpg:                using RSA key 71D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg:                 aka "Gregory Kurz <gregory.kurz@free.fr>"
# gpg:                 aka "[jpeg image of size 3330]"
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3  4910 71D4 D5E5 822F 73D6

* remotes/gkurz/tags/for-upstream:
  9p: remove support for the "handle" backend
  xen/9pfs: use g_new(T, n) instead of g_malloc(sizeof(T) * n)
  9p: use g_new(T, n) instead of g_malloc(sizeof(T) * n)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * Convert various devices from sysbus init to instance_init
 * Remove the now unused sysbus init support entirely
 * Allow AArch64 processors to boot from a kernel placed over 4GB
 * hw: arm: musicpal: drop TYPE_WM8750 in object_property_set_link()
 * versal: minor fixes to virtio-mmio instantation
 * arm: Implement the ARMv8.1-HPD extension
 * arm: Implement the ARMv8.2-AA32HPD extension
 * arm: Implement the ARMv8.1-LOR extension (as the trivial
   "no limited ordering regions provided" minimum)

# gpg: Signature made Thu 13 Dec 2018 14:52:25 GMT
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20181213: (37 commits)
  target/arm: Implement the ARMv8.1-LOR extension
  target/arm: Use arm_hcr_el2_eff more places
  target/arm: Introduce arm_hcr_el2_eff
  target/arm: Implement the ARMv8.2-AA32HPD extension
  target/arm: Implement the ARMv8.1-HPD extension
  target/arm: Tidy scr_write
  target/arm: Fix HCR_EL2.TGE check in arm_phys_excp_target_el
  target/arm: Add SCR_EL3 bits up to ARMv8.5
  target/arm: Add HCR_EL2 bits up to ARMv8.5
  target/arm: Move id_aa64mmfr* to ARMISARegisters
  hw/arm: versal: Correct the nr of IRQs to 192
  hw/arm: versal: Use IRQs 111 - 118 for virtio-mmio
  hw/arm: versal: Reduce number of virtio-mmio instances
  hw/arm: versal: Remove bogus virtio-mmio creation
  core/sysbus: remove the SysBusDeviceClass::init path
  xen_backend: remove xen_sysdev_init() function
  usb/tusb6010: Convert sysbus init function to realize function
  timer/puv3_ost: Convert sysbus init function to realize function
  timer/grlib_gptimer: Convert sysbus init function to realize function
  timer/etraxfs_timer: Convert sysbus init function to realize function
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Marking a function coroutine_fn currently has no effect on the compiler,
but it documents that this function must be called from coroutine
context and it may yield.  This is important information for the
programmer.

Also, if we ever transition to a stackless coroutine implementation,
then it's likely that the annotation will become mandatory so the
compiler can use the correct calling convention for coroutine functions.

Cc: Max Reitz <mreitz@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

"-machine pc" will not work all architectures. Lets fall back to the
default machine by not specifying it.

In addition we also need to specify -no-shutdown on s390 as qemu will
exit otherwise.

Cc: qemu-stable@nongnu.org
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Towards the end of bdrv_reopen_queue_child(), before starting to
process the children, the update_flags_from_options() function is
called in order to have BDRVReopenState.flags in sync with the options
from the QDict.

This is necessary because during the reopen process flags must be
updated for all nodes in the queue so bdrv_is_writable_after_reopen()
and the permission checks work correctly.

Because of that, calling update_flags_from_options() again in
bdrv_reopen_prepare() doesn't really change the flags (they are
already up-to-date). But we need to call it in order to remove those
options from QemuOpts and that way indicate that they have been
processed.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This function takes four options (cache.direct, cache.no-flush,
read-only and auto-read-only) from a QemuOpts object and updates the
flags accordingly.

If any of those options is not set (because it was missing from the
original QDict or because it had an invalid value) then the function
aborts with a failed assertion:

   $ qemu-io -c 'reopen -o read-only=foo' hd.qcow2
   block.c:1126: update_flags_from_options: Assertion `qemu_opt_find(opts, BDRV_OPT_CACHE_DIRECT)' failed.
   Aborted

This assertion is unnecessary, and it forces any caller of
bdrv_reopen() to pass all the aforementioned four options. This may
have made sense in order to remove ambiguity when bdrv_reopen() was
taking both flags and options, but that's not the case anymore.

It's also unnecessary if we want to validate the option values,
because bdrv_reopen_prepare() already takes care of that, as we can
see if we remove the assertions:

   $ qemu-io -c 'reopen -o read-only=foo' hd.qcow2
   Parameter 'read-only' expects 'on' or 'off'
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>