Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

If a page size used by QEMU is not enabled in the PHB IOMMU page mask,
in-kernel acceleration of TCE handling won't be enabled and performance
might be slower than expected.

This prints a warning if system page size is not enabled. This should
print a warning if huge pages are enabled but sphb.pgsz still uses
the default value of 4K|64K.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This enables in-kernel handling of H_PUT_TCE_INDIRECT and
H_STUFF_TCE hypercalls. The host kernel support is there since v4.6,
in particular d3695aa4f452
("KVM: PPC: Add support for multiple-TCE hcalls").

H_PUT_TCE is already accelerated and does not need any special enablement.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

For a little while around 4.9, Linux kernels that saw the radix bit in
ibm,pa-features would attempt to set up the MMU as if they were a
hypervisor, even if they were a guest, which would cause them to
crash.

Work around this by detecting pre-ISA 3.0 guests by their lack of that
bit in option vector 1, and then removing the radix bit from
ibm,pa-features. Note: This now requires regeneration of that node
after CAS negotiation.
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Fix style nits]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Add the new node, /chosen/ibm,arch-vec-5-platform-support to the
device tree. This allows the guest to determine which modes are
supported by the hypervisor.

Update the option vector processing in h_client_architecture_support()
to handle the new MMU bits. This allows guests to request hash or
radix mode and QEMU to create the guest's HPT at this time if it is
necessary but hasn't yet been done.  QEMU will terminate the guest if
it requests an unavailable mode, as required by the architecture.

Extend the ibm,pa-features node with the new ISA 3.0 values
and set the radix bit if KVM supports radix mode. This probably won't
be used directly by guests to determine the availability of radix mode
(that is indicated by the new node added above) but the architecture
requires that it be set when the hardware supports it.

If QEMU is using KVM, and KVM is capable of running in radix mode,
guests can be run in real-mode without allocating a HPT (because KVM
will use a minimal RPT). So in this case, we avoid creating the HPT
at reset time and later (during CAS) create it if it is necessary.

ISA 3.0 guests will now begin to call h_register_process_table(),
which has been added previously.
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Strip some unneeded prefix from error messages]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

In the next patch, spapr_fixup_cpu_dt() will need to call
spapr_populate_pa_features() so move it's definition up without making
any other changes.
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The H_REGISTER_PROCESS_TABLE H_CALL is used by a guest to indicate to the
hypervisor where in memory its process table is and how translation should
be performed using this process table.

Provide the implementation of this H_CALL for a guest.

We first check for invalid flags, then parse the flags to determine the
operation, and then check the other parameters for valid values based on
the operation (register new table/deregister table/maintain registration).
The process table is then stored in the appropriate location and registered
with the hypervisor (if running under KVM), and the LPCR_[UPRT/GTSE] bits
are updated as required.
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Correct missing prototype and uninitialized variable]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The use of the new in memory tables introduced in ISAv3.00 for translation,
also referred to as process tables, requires the introduction of 3 new
H-CALLs; H_REGISTER_PROCESS_TABLE, H_CLEAN_SLB, and H_INVALIDATE_PID.

Add shells for each of these and register them as the hypercall handlers.
Currently they all log an unimplemented hypercall and return H_FUNCTION.
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
[dwg: Fix style nits]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Query and cache the value of two new KVM capabilities that indicate
KVM's support for new radix and hash modes of the MMU.
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Use the new ioctl, KVM_PPC_GET_RMMU_INFO, to fetch radix MMU
information from KVM and present the page encodings in the device tree
under ibm,processor-radix-AP-encodings. This provides page size
information to the guest which is necessary for it to use radix mode.
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Compile fix for 32-bit targets, style nit fix]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

KVM_CAP_SPAPR_TCE capability allows creating TCE tables in KVM which
allows having in-kernel acceleration for H_PUT_TCE_xxx hypercalls.
However it only supports 32bit DMA windows at zero bus offset.

There is a new KVM_CAP_SPAPR_TCE_64 capability which supports 64bit
window size, variable page size and bus offset.

This makes use of the new capability. The kernel headers are already
updated as the kernel support went in to v4.6.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The devices that are derived from TYPE_PNV_CHIP currently show up
as "uncategorized" devices in the help text of "-device ?". Since
they obviously are related to the CPU, let's put them into the
CPU category instead.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Also use an 'sPAPRRTCState' attribute under the sPAPR machine to hold
the RTC object. Overall, these changes remove an unnecessary and
implicit dependency on SysBus.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

On Power8 hosts it is currently theoretically possible for QEMU/KVM-HV guests
to receive a ibm,pa-features property indicating that HTM support is available
when it is not.  The situation would occur if the platform firmware of
a Power8 host cleared the HTM bit of the ibm,pa-features property.
QEMU would query KVM for the availability of HTM, which will return no
support, but workaround code in kvm_arch_init_vcpu() would then
re-enable it because KVM_HV is in use and the processor is P8.

This patch adjusts the workaround in kvm_arch_init_vcpu() so that it does not
enable HTM (in the above case) unless the host kernel indicates to the QEMU
process, via the auxiliary vector, that userspace can use HTM (via the HWCAP2
bit KVM_FEATURE2_HTM).

The reason to use the value from the auxiliary vector is that it is
set based only on what the host kernel found in the ibm,pa-features
HTM bit at boot time.
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Patch queue for s390 - 2017-04-25

Two simple fixes this time around:

  - fix BQL for s390 virtio target
  - Fix SIGP emulation

# gpg: Signature made Tue 25 Apr 2017 12:40:38 BST
# gpg:                using RSA key 0x2B33791E03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg:                 aka "Alexander Graf <alex@csgraf.de>"
# Primary key fingerprint: 7F2A 4C87 F94C 5EFE DBC3  75DC 1631 30DA 5B24 530A
#      Subkey fingerprint: 54D3 364F A6C3 60FF AF81  EB53 2B33 791E 03FE DC60

* remotes/agraf/tags/signed-s390-for-upstream:
  s390x/misc_helper.c: wrap s390_virtio_hypercall in BQL
  target-s390x: Mask the SIGP order_code to 8bit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Tue 25 Apr 2017 12:22:03 BST
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  COLO-compare: Optimize tcp compare trace event
  COLO-compare: Optimize tcp compare for option field
  slirp: add a fake NC-SI backend
  aspeed: add a FTGMAC100 nic
  net/ftgmac100: add a 'aspeed' property
  net: add FTGMAC100 support
  hw/net: add MII definitions
  colo-compare: Fix old packet check bug.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

s390_virtio_hypercall can trigger IO events and interrupts, most notably
when using virtio-ccw devices.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Fixes: 278f5e98 ("s390x/misc_helper.c: wrap IO instructions in BQL")
Signed-off-by: NAlexander Graf <agraf@suse.de>

According to "CPU Signaling and Response", "Signal-Processor Orders",
the order field is bit position 56-63. Without this, the Linux
guest kernel is sometimes unable to stop emulation and enters
an infinite loop of "XXX unknown sigp: 0xffffffff00000005".
Signed-off-by: NPhilipp Kern <phil@philkern.de>
Reviewed-by: NThomas Huth <thuth@tuxfamily.org>
[agraf: add comment according to email]
Signed-off-by: NAlexander Graf <agraf@suse.de>

macOS 10.12 deprecated/replaced many AppKit constants to make naming
more consistent. Use the new constants, and #define them to the
old constants when compiling against a pre-10.12 SDK.
Signed-off-by: NBrendan Shanks <brendan@bslabs.net>
Message-id: 20170425062952.99149-1-brendan@bslabs.net
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Optimize two trace events as one, adjust print format make
it easy to read. rename trace_colo_compare_pkt_info_src/dst
to trace_colo_compare_tcp_info.
Signed-off-by: NZhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

In this patch we support packet that have tcp options field.
Add tcp options field check, If the packet have options
field we just skip it and compare tcp payload,
Avoid unnecessary checkpoint, optimize performance.
Signed-off-by: NZhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

NC-SI (Network Controller Sideband Interface) enables a BMC to manage
a set of NICs on a system. This model takes the simplest approach and
reverses the NC-SI packets to pretend a NIC is present and exercise
the Linux driver.

The NCSI header file <ncsi-pkt.h> comes from mainline Linux and was
untabified.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NJason Wang <jasowang@redhat.com>

There is a second NIC but we do not use it for the moment. We use the
'aspeed' property to tune the definition of the end of ring buffer bit
for the Aspeed SoCs.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NJason Wang <jasowang@redhat.com>

The Aspeed SoCs have a different definition of the end of the ring
buffer bit. Add a property to specify which set of bits should be used
by the NIC.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Exynos4210 has four SD/MMC controllers supporting:
 - SD Standard Host Specification Version 2.0,
 - MMC Specification Version 4.3,
 - SDIO Card Specification Version 2.0,
 - DMA and ADMA.

Add emulation of SDHCI devices which allows accessing storage through SD
cards. Differences from real hardware:
 - Devices are shipped with eMMC memory, not SD card.
 - The Exynos4210 SDHCI has few more registers, e.g. for
   controlling the clocks, additional status (0x80, 0x84, 0x8c). These
   are not implemented.

Testing on smdkc210 machine with "-drive file=FILE,if=sd,bus=0,index=2".
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Message-id: 20170422190709.8676-1-krzk@kernel.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Mon 24 Apr 2017 20:18:05 BST
# gpg:                using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98  D624 BDBE 7B27 C0DE 3057

* remotes/cody/tags/block-pull-request:
  qemu-iotests: _cleanup_qemu must be called on exit
  block/rbd: Add support for reopen()
  block/rbd - update variable names to more apt names
  block: use bdrv_can_set_read_only() during reopen
  block: introduce bdrv_can_set_read_only()
  block: code movement
  block: honor BDRV_O_ALLOW_RDWR when clearing bs->read_only
  block: do not set BDS read_only if copy_on_read enabled
  block: add bdrv_set_read_only() helper function
  qemu-iotests: exclude vxhs from image creation via protocol
  block/vxhs.c: Add qemu-iotests for new block device type "vxhs"
  block/vxhs.c: Add support for a new block device type called "vxhs"
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For the tests that use the common.qemu functions for running a QEMU
process, _cleanup_qemu must be called in the exit function.

If it is not, if the qemu process aborts, then not all of the droppings
are cleaned up (e.g. pidfile, fifos).

This updates those tests that did not have a cleanup in qemu-iotests.

(I swapped spaces for tabs in test 102 as well)
Reported-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Message-id: d59c2f6ad6c1da8b9b3c7f357c94a7122ccfc55a.1492544096.git.jcody@redhat.com

This adds support for reopen in rbd, for changing between r/w and r/o.

Note, that this is only a flag change, but we will block a change from
r/o to r/w if we are using an RBD internal snapshot.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-id: d4e87539167ec6527d44c97b164eabcccf96e4f3.1491597120.git.jcody@redhat.com

Update 'clientname' to be 'user', which tracks better with both
the QAPI and rados variable naming.

Update 'name' to be 'image_name', as it indicates the rbd image.
Naming it 'image' would have been ideal, but we are using that for
the rados_image_t value returned by rbd_open().
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-id: b7ec1fb2e1cf36f9b6911631447a5b0422590b7d.1491597120.git.jcody@redhat.com

Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-id: 00aed7ffdd7be4b9ed9ce1007d50028a72b34ebe.1491597120.git.jcody@redhat.com

Introduce check function for setting read_only flags.  Will return < 0 on
error, with appropriate Error value set.  Does not alter any flags.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-id: e2bba34ac3bc76a0c42adc390413f358ae0566e8.1491597120.git.jcody@redhat.com

Move bdrv_is_read_only() up with its friends.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Message-id: 73b2399459760c32506f9407efb9dddb3a2789de.1491597120.git.jcody@redhat.com

The BDRV_O_ALLOW_RDWR flag allows / prohibits the changing of
the BDS 'read_only' state, but there are a few places where it
is ignored.  In the bdrv_set_read_only() helper, make sure to
honor the flag.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-id: be2e5fb2d285cbece2b6d06bed54a6f56520d251.1491597120.git.jcody@redhat.com

A few block drivers will set the BDS read_only flag from their
.bdrv_open() function.  This means the bs->read_only flag could
be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ
flag check occurs prior to the call to bdrv->bdrv_open().

This adds an error return to bdrv_set_read_only(), and an error will be
return if we try to set the BDS to read_only while copy_on_read is
enabled.

This patch also changes the behavior of vvfat.  Before, vvfat could
override the drive 'readonly' flag with its own, internal 'rw' flag.

For instance, this -drive parameter would result in a writable image:

"-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on"

This is not correct.  Now, attempting to use the above -drive parameter
will result in an error (i.e., 'rw' is incompatible with 'readonly=on').
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com

We have a helper wrapper for checking for the BDS read_only flag,
add a helper wrapper to set the read_only flag as well.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com

The protocol VXHS does not support image creation.  Some tests expect
to be able to create images through the protocol.  Exclude VXHS from
these tests.
Signed-off-by: NJeff Cody <jcody@redhat.com>

These changes use a vxhs test server that is a part of the following
repository:
https://github.com/VeritasHyperScale/libqnio.gitSigned-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Message-id: 1491277689-24949-3-git-send-email-Ashish.Mittal@veritas.com

Source code for the qnio library that this code loads can be downloaded from:
https://github.com/VeritasHyperScale/libqnio.git

Sample command line using JSON syntax:
./x86_64-softmmu/qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0
-k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
-msg timestamp=on
'json:{"driver":"vxhs","vdisk-id":"c3e9095a-a5ee-4dce-afeb-2a59fb387410",
"server":{"host":"172.172.17.4","port":"9999"}}'

Sample command line using URI syntax:
qemu-img convert -f raw -O raw -n
/var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad
vxhs://192.168.0.1:9999/c6718f6b-0401-441d-a8c3-1f0064d75ee0

Sample command line using TLS credentials (run in secure mode):
./qemu-io --object
tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read
-v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999",
"vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}'

[Jeff: Modified trace-events with the correct string formatting]
Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Message-id: 1491277689-24949-2-git-send-email-Ashish.Mittal@veritas.com

fix display update races, part one.
add xres + yres properties to qxl and virtio.
misc fixes and cleanups.

# gpg: Signature made Mon 24 Apr 2017 13:14:49 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-vga-20170424-1:
  virtio-gpu: add xres and yres properties
  qxl: add xres and yres properties
  vmsvga: fix vmsvga_update_display
  g364fb: make display updates thread safe
  exynos: make display updates thread safe
  framebuffer: make display updates thread safe
  vga: make display updates thread safe.
  vga: add vga_scanline_invalidated helper
  memory: add support getting and using a dirty bitmap copy.
  bitmap: add bitmap_copy_and_clear_atomic
  virtio-gpu: replace PIXMAN_* by PIXMAN_BE_*
  console: add same displaychangelistener registration pre-condition
  console: add same surface replace pre-condition
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>