Note that in the general reg=reg,reg case we're restricted
to 16-bit insertions.  This makes it easy to allow "any"
constant as input, as post-truncation it will fit into the
constant load insn for which we have room in the bundle.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

It is possible to slightly optimize the TLB access code, by replacing
the movi + and instructions by a deposit instruction.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Remove suboptimal register shifting in qemu_ld/st ops, introduced at the
CONFIG_TCG_PASS_AREG0 time.

As mem_idx is now loaded in register R58/R59 for the slow path, we have
to make sure to do it last, to not add additional register constraints.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Implement movcond_i32/64 on ia64 hosts. It is not possible to have
immediate compare arguments without adding a new bundle, but it is
possible to have 22-bit immediate value arguments.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Use stack instead of temp_buf array in CPUState for TCG temps.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The TCG jmp operation doesn't really make sense in the QEMU context, it
is unused, it is not implemented by some targets, and it is wrongly
implemented by some others.

This patch simply removes it.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Acked-by: NBlue Swirl <blauwirbel@gmail.com>
Acked-by: Stefan Weil<sw@weilnetz.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The TCG targets no longer need individual implementations.

Since commit 6a18ae2d,
'flags' is no longer used in tcg_target_get_call_iarg_regs_count.

The remaining tcg_target_get_call_iarg_regs_count is trivial and only
called once. Therefore the patch eliminates it completely.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.

Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.

Remove unused HELPER_CFLAGS.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Store slow path has been broken in e141ab52:
- the arguments are shifted before the last one (mem_index) is written.
- the shift is done for both slow and fast paths.

Fix that. Also optimize a bit by bundling the move together. This still
can be optimized, but it's better to wait for a decision to be taken on
the arguments order.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Prologue and epilogue code has been broken in cea5f9a2.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Optionally, make memory access helpers take a parameter for CPUState
instead of relying on global env.

On most targets, perform simple moves to reorder registers. On i386,
switch from regparm(3) calling convention to standard stack-based
version.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Scripted conversion:
  for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
    sed -i "s/CPUState/CPUArchState/g" $file
  done

All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

Including tcg_out_ld, tcg_out_st, tcg_out_mov, tcg_out_movi.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Remove the unused function tcg_out_addi() from the ia64 TCG backend;
this brings it into line with other backends.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The second register is never used for ia64 hosts.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Delegate TCG temp_buf setup to targets, so that they can use a stack
frame later instead.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Make functions take a parameter for CPUState instead of relying
on global env. Pass CPUState pointer to TCG prologue, which moves
it to AREG0.

Thanks to Peter Maydell and Laurent Desnogues for the ARM prologue
change.

Revert the hacks to avoid AREG0 use on Sparc hosts.

Move cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h.

Compile the file without HELPER_CFLAGS.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add a comment about cache coherency and retranslation, so that people
developping new targets based on existing ones are warned of the issue.
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Spotted by Richard Henderson.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The usermode version of qemu_ld doesn't used mem_index,
leading to set-but-not-used warnings.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NEdgar E. Iglesias <edgar@axis.com>

A typo in the usermode address calculation path; R3 used where R2 needed.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NEdgar E. Iglesias <edgar@axis.com>

Use ld4 not ld8 for reading the tlb of 32-bit targets.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NEdgar E. Iglesias <edgar@axis.com>

The port was not properly merged following
86feb1c8Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NEdgar E. Iglesias <edgar@axis.com>

Fix compilation error when GUEST_BASE is not defined.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NEdgar E. Iglesias <edgar@axis.com>

Both tcg_target_init and tcg_target_qemu_prologue
are unused outside of tcg.c.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Mirror tcg_out_movi in having a TYPE parameter.  This allows x86_64
to perform the move at the proper width, which may elide a REX prefix.

Introduce a TCG_TYPE_REG enumerator to represent the "native width"
of the host register, and to distinguish the usage from "pointer data"
as represented by the existing TCG_TYPE_PTR.

Update all targets to match.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Saves one bundle per memory operation.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

(1) The output registers were not marked call-clobbered, even though
    they can be modified by called functions.
(2) The thread pointer was not marked reserved.
(3) R4-R6 are call-saved, but not saved by the prologue.  Rather than
    save them, mark them reserved so that we don't use them.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

A few words about design choices:
* On IA64, instructions should be grouped by bundle, and dependencies
  between instructions declared. A first version of this code tried to
  schedule instructions automatically, but was very complex and too
  invasive for the current common TCG code (ops not ending at
  instruction boundaries, code retranslation breaking already generated
  code, etc.)  It was also not very efficient, as dependencies between
  TCG ops is not available.
  Instead the option taken by the current implementation does not try
  to fill the bundle by scheduling instructions, but by providing ops
  not available as an ia64 instruction, and by offering 22-bit constant
  loading for most of the instructions. With both options the bundle are
  filled at approximately the same level.

* Up to 128 registers can be affected to a function on IA64, but TCG
  limits this number to 64, which is actually more than enough. The
  register affectation is the following:
  - r0: used to map a constant argument with value 0
  - r1: global pointer
  - r2, r3: internal use
  - r4 to r6: not used to avoid saving them
  - r7: env structure
  - r8 to r11: free for TCG (call clobbered)
  - r12: stack pointer
  - r13: thread pointer
  - r14 to r31: free for TCG (call clobbered)
  - r32: reserved (return address)
  - r33: reserved (PFS)
  - r33 to r63: free for TCG

* The IA64 architecture has only 64-bit registers and no 32-bit
  instructions (the only exception being cmp4). Therefore 64-bit
  registers and instructions are used for 32-bit ops. The adopted
  strategy is the same as the ABI, that is the higher 32 bits are
  undefined. Most ops (and, or, add, shl, etc.) can directly use
  the 64-bit registers, while some others have to sign-extend (sar,
  div, etc.) or zero-extend (shr, divu, etc.) the register first.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>