Signed-off-by: NAarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Acked-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-9-stefanha@redhat.com
Message-Id: <20200120141858.587874-9-stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NAarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-8-stefanha@redhat.com
Message-Id: <20200120141858.587874-8-stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NAarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-7-stefanha@redhat.com
Message-Id: <20200120141858.587874-7-stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Follow linux-aio.o and stub out the block/io_uring.o APIs that will be
missing when a binary is linked with obj-util-y but without
block-util-y (e.g. vhost-user-gpu).

For example, the stubs are necessary so that a binary using util/async.o
from obj-util-y for qemu_bh_new() links successfully.  In this case
block/io_uring.o from block-util-y isn't needed and we can avoid
dragging in the block layer by linking the stubs instead.  The stub
functions never get called.
Signed-off-by: NAarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-6-stefanha@redhat.com
Message-Id: <20200120141858.587874-6-stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Aborts when sqe fails to be set as sqes cannot be returned to the
ring. Adds slow path for short reads for older kernels
Signed-off-by: NAarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-5-stefanha@redhat.com
Message-Id: <20200120141858.587874-5-stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NAarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Acked-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-4-stefanha@redhat.com
Message-Id: <20200120141858.587874-4-stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Since io_uring is the actual name of the Linux API, we use it as enum
value even though the QAPI schema conventions would prefer io-uring.
Signed-off-by: NAarushi Mehta <mehta.aaru20@gmail.com>
Acked-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-3-stefanha@redhat.com
Message-Id: <20200120141858.587874-3-stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NAarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Acked-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200120141858.587874-2-stefanha@redhat.com
Message-Id: <20200120141858.587874-2-stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

bdrv_mark_request_serialising is writing the overlap_offset and
overlap_bytes fields of BdrvTrackedRequest.  Take bs->reqs_lock
for the whole duration of it, and not just when waiting for
serialising requests, so that tracked_request_overlaps does not
look at a half-updated request.

The new code does not unlock/relock around retries.  This is unnecessary
because a retry is always preceded by a CoQueue wait, which already
releases and reacquires bs->reqs_lock.
Reported-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1578495356-46219-4-git-send-email-pbonzini@redhat.com
Message-Id: <1578495356-46219-4-git-send-email-pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Marking without waiting would not result in actual serialising behavior.
Thus, make a call bdrv_mark_request_serialising sufficient for
serialisation to happen.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1578495356-46219-3-git-send-email-pbonzini@redhat.com
Message-Id: <1578495356-46219-3-git-send-email-pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

It is unused since commit 00e30f05 ("block/backup: use backup-top instead
of write notifiers", 2019-10-01), drop it to simplify the code.

While at it, drop redundant assertions on flags.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1578495356-46219-2-git-send-email-pbonzini@redhat.com
Message-Id: <1578495356-46219-2-git-send-email-pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

target-arm queue:
 * hw/core/or-irq: Fix incorrect assert forbidding num-lines == MAX_OR_LINES
 * target/arm/arm-semi: Don't let the guest close stdin/stdout/stderr
 * aspeed: some minor bugfixes
 * aspeed: add eMMC controller model for AST2600 SoC
 * hw/arm/raspi: Remove obsolete use of -smp to set the soc 'enabled-cpus'
 * New 3-phase reset API for device models
 * hw/intc/arm_gicv3_kvm: Stop wrongly programming GICR_PENDBASER.PTZ bit
 * Arm KVM: stop/restart the guest counter when the VM is stopped and started

# gpg: Signature made Thu 30 Jan 2020 16:14:45 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200130: (26 commits)
  target/arm/cpu: Add the kvm-no-adjvtime CPU property
  target/arm/kvm: Implement virtual time adjustment
  tests/arm-cpu-features: Check feature default values
  target/arm/kvm64: kvm64 cpus have timer registers
  hw/arm/virt: Add missing 5.0 options call to 4.2 options
  target/arm/kvm: trivial: Clean up header documentation
  hw/intc/arm_gicv3_kvm: Stop wrongly programming GICR_PENDBASER.PTZ bit
  hw/s390x/ipl: replace deprecated qdev_reset_all registration
  vl: replace deprecated qbus_reset_all registration
  docs/devel/reset.rst: add doc about Resettable interface
  hw/core: deprecate old reset functions and introduce new ones
  hw/core/qdev: update hotplug reset regarding resettable
  hw/core/qdev: handle parent bus change regarding resettable
  hw/core/resettable: add support for changing parent
  hw/core: add Resettable support to BusClass and DeviceClass
  hw/core: create Resettable QOM interface
  hw/core/qdev: add trace events to help with resettable transition
  add device_legacy_reset function to prepare for reset api change
  hw/arm/raspi: Remove obsolete use of -smp to set the soc 'enabled-cpus'
  misc/pca9552: Add qom set and get
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

kvm-no-adjvtime is a KVM specific CPU property and a first of its
kind. To accommodate it we also add kvm_arm_add_vcpu_properties()
and a KVM specific CPU properties description to the CPU features
document.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Message-id: 20200120101023.16030-7-drjones@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When a VM is stopped (such as when it's paused) guest virtual time
should stop counting. Otherwise, when the VM is resumed it will
experience time jumps and its kernel may report soft lockups. Not
counting virtual time while the VM is stopped has the side effect
of making the guest's time appear to lag when compared with real
time, and even with time derived from the physical counter. For
this reason, this change, which is enabled by default, comes with
a KVM CPU feature allowing it to be disabled, restoring legacy
behavior.

This patch only provides the implementation of the virtual time
adjustment. A subsequent patch will provide the CPU property
allowing the change to be enabled and disabled.
Reported-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Message-id: 20200120101023.16030-6-drjones@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If we know what the default value should be then we can test for
that as well as the feature existence.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20200120101023.16030-5-drjones@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add the missing GENERIC_TIMER feature to kvm64 cpus.

We don't currently use these registers when KVM is enabled, but it's
probably best we add the feature flag for consistency and potential
future use. There's also precedent, as we add the PMU feature flag to
KVM enabled guests, even though we don't use those registers either.

This change was originally posted as a hunk of a different, never
merged patch from Bijan Mottahedeh.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20200120101023.16030-4-drjones@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAndrew Jones <drjones@redhat.com>
Message-id: 20200120101023.16030-3-drjones@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAndrew Jones <drjones@redhat.com>
Message-id: 20200120101023.16030-2-drjones@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If LPIs are disabled, KVM will just ignore the GICR_PENDBASER.PTZ bit when
restoring GICR_CTLR.  Setting PTZ here makes littlt sense in "reduce GIC
initialization time".

And what's worse, PTZ is generally programmed by guest to indicate to the
Redistributor whether the LPI Pending table is zero when enabling LPIs.
If migration is triggered when the PTZ has just been cleared by guest (and
before enabling LPIs), we will see PTZ==1 on the destination side, which
is not as expected.  Let's just drop this hackish userspace behavior.

Also take this chance to refine the comment a bit.

Fixes: 367b9f52 ("hw/intc/arm_gicv3_kvm: Implement get/put functions")
Signed-off-by: NZenghui Yu <yuzenghui@huawei.com>
Message-id: 20200119133051.642-1-yuzenghui@huawei.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Replace deprecated qdev_reset_all by resettable_cold_reset_fn for
the ipl registration in the main reset handlers.

This does not impact the behavior for the following reasons:
+ at this point resettable just call the old reset methods of devices
  and buses in the same order than qdev/qbus.
+ resettable handlers registered with qemu_register_reset are
  serialized; there is no interleaving.
+ eventual explicit calls to legacy reset API (device_reset or
  qdev/qbus_reset) inside this reset handler will not be masked out
  by resettable mechanism; they do not go through resettable api.
Signed-off-by: NDamien Hedde <damien.hedde@greensocs.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20200123132823.1117486-12-damien.hedde@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Replace deprecated qbus_reset_all by resettable_cold_reset_fn for
the sysbus reset registration.

Apart for the raspi machines, this does not impact the behavior
because:
+ at this point resettable just calls the old reset methods of devices
  and buses in the same order as qdev/qbus.
+ resettable handlers registered with qemu_register_reset are
  serialized; there is no interleaving.
+ eventual explicit calls to legacy reset API (device_reset or
  qdev/qbus_reset) inside this reset handler will not be masked out
  by resettable mechanism; they do not go through resettable api.

For the raspi machines, during the sysbus reset the sd-card is not
reset twice anymore but only once. This is a consequence of switching
both sysbus reset and changing parent to resettable; it detects the
second reset is not needed. This has no impact on the state after
reset; the sd-card reset method only reset local state and query
information from the block backend.

The raspi reset change can be observed by using the following command
(reset will occurs, then do Ctrl-C to end qemu; no firmware is
given here).
qemu-system-aarch64 -M raspi3 \
    -trace resettable_phase_hold_exec \
    -trace qdev_update_parent_bus \
    -trace resettable_change_parent \
    -trace qdev_reset -trace qbus_reset

Before the patch, the qdev/qbus_reset traces show when reset method are
called. After the patch, the resettable_phase_hold_exec show when reset
method are called.

The traced reset order of the raspi3 is listed below. I've added empty
lines and the tree structure.

 +->bcm2835-peripherals reset
 |
 |       +->sd-card reset
 |   +->sd-bus reset
 +->bcm2835_gpio reset
 |      -> dev_update_parent_bus (move the sd-card on the sdhci-bus)
 |      -> resettable_change_parent
 |
 +->bcm2835-dma reset
 |
 |   +->bcm2835-sdhost-bus reset
 +->bcm2835-sdhost reset
 |
 |       +->sd-card (reset ONLY BEFORE BEFORE THE PATCH)
 |   +->sdhci-bus reset
 +->generic-sdhci reset
 |
 +->bcm2835-rng reset
 +->bcm2835-property reset
 +->bcm2835-fb reset
 +->bcm2835-mbox reset
 +->bcm2835-aux reset
 +->pl011 reset
 +->bcm2835-ic reset
 +->bcm2836-control reset
System reset

In both case, the sd-card is reset (being on bcm2835_gpio/sd-bus) then moved
to generic-sdhci/sdhci-bus by the bcm2835_gpio reset method.

Before the patch, it is then reset again being part of generic-sdhci/sdhci-bus.
After the patch, it considered again for reset but its reset method is not
called because it is already flagged as reset.
Signed-off-by: NDamien Hedde <damien.hedde@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-11-damien.hedde@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NDamien Hedde <damien.hedde@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20200123132823.1117486-10-damien.hedde@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Deprecate device_legacy_reset(), qdev_reset_all() and
qbus_reset_all() to be replaced by new functions
device_cold_reset() and bus_cold_reset() which uses resettable API.

Also introduce resettable_cold_reset_fn() which may be used as a
replacement for qdev_reset_all_fn and qbus_reset_all_fn().

Following patches will be needed to look at legacy reset call sites
and switch to resettable api. The legacy functions will be removed
when unused.
Signed-off-by: NDamien Hedde <damien.hedde@greensocs.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-9-damien.hedde@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This commit make use of the resettable API to reset the device being
hotplugged when it is realized. Also it ensures it is put in a reset
state coherent with the parent it is plugged into.

Note that there is a difference in the reset. Instead of resetting
only the hotplugged device, we reset also its subtree (switch to
resettable API). This is not expected to be a problem because
sub-buses are just realized too. If a hotplugged device has any
sub-buses it is logical to reset them too at this point.

The recently added should_be_hidden and PCI's partially_hotplugged
mechanisms do not interfere with realize operation:
+ In the should_be_hidden use case, device creation is
delayed.
+ The partially_hotplugged mechanism prevents a device to be
unplugged and unrealized from qdev POV and unrealized.
Signed-off-by: NDamien Hedde <damien.hedde@greensocs.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-8-damien.hedde@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In qdev_set_parent_bus(), when changing the parent bus of a
realized device, if the source and destination buses are not in the
same reset state, some adaptations are required. This patch adds
needed call to resettable_change_parent() to make sure a device reset
state stays coherent with its parent bus.

The addition is a no-op if:
1. the device being parented is not realized.
2. the device is realized, but both buses are not under reset.

Case 2 means that as long as qdev_set_parent_bus() is called
during the machine realization procedure (which is before the
machine reset so nothing is in reset), it is a no op.

There are 52 call sites of qdev_set_parent_bus(). All but one fall
into the no-op case:
+ 29 trivial calls related to virtio (in hw/{s390x,display,virtio}/
  {vhost,virtio}-xxx.c) to set a vdev(or vgpu) composing device
  parent bus just before realizing the same vdev(vgpu).
+ hw/core/qdev.c: when creating a device in qdev_try_create()
+ hw/core/sysbus.c: when initializing a device in the sysbus
+ hw/i386/amd_iommu.c: before realizing AMDVIState/pci
+ hw/isa/piix4.c: before realizing PIIX4State/rtc
+ hw/misc/auxbus.c: when creating an AUXBus
+ hw/misc/auxbus.c: when creating an AUXBus child
+ hw/misc/macio/macio.c: when initializing a MACIOState child
+ hw/misc/macio/macio.c: before realizing NewWorldMacIOState/pmu
+ hw/misc/macio/macio.c: before realizing NewWorldMacIOState/cuda
+ hw/net/virtio-net.c: Used for migration when using the failover
                       mechanism to migration a vfio-pci/net. It is
                       a no-op because at this point the device is
                       already on the bus.
+ hw/pci-host/designware.c: before realizing DesignwarePCIEHost/root
+ hw/pci-host/gpex.c: before realizing GPEXHost/root
+ hw/pci-host/prep.c: when initialiazing PREPPCIState/pci_dev
+ hw/pci-host/q35.c: before realizing Q35PCIHost/mch
+ hw/pci-host/versatile.c: when initializing PCIVPBState/pci_dev
+ hw/pci-host/xilinx-pcie.c: before realizing XilinxPCIEHost/root
+ hw/s390x/event-facility.c: when creating SCLPEventFacility/
                             TYPE_SCLP_QUIESCE
+ hw/s390x/event-facility.c: ditto with SCLPEventFacility/
                             TYPE_SCLP_CPU_HOTPLUG
+ hw/s390x/sclp.c: Not trivial because it is called on a SLCPDevice
  just after realizing it. Ok because at this point the destination
  bus (sysbus) is not in reset; the realize step is before the
  machine reset.
+ hw/sd/core.c: Not OK. Used in sdbus_reparent_card(). See below.
+ hw/ssi/ssi.c: Used to put spi slave on spi bus and connect the cs
  line in ssi_auto_connect_slave(). Ok because this function is only
  used in realize step in hw/ssi/aspeed_smc.ci, hw/ssi/imx_spi.c,
  hw/ssi/mss-spi.c, hw/ssi/xilinx_spi.c and hw/ssi/xilinx_spips.c.
+ hw/xen/xen-legacy-backend.c: when creating a XenLegacyDevice device
+ qdev-monitor.c: in device hotplug creation procedure before realize

Note that this commit alone will have no effect, right now there is no
use of resettable API to reset anything. So a bus will never be tagged
as in-reset by this same API.

The one place where side-effect will occurs is in hw/sd/core.c in
sdbus_reparent_card(). This function is only used in the raspi machines,
including during the sysbus reset procedure. This case will be
carrefully handled when doing the multiple phase reset transition.
Signed-off-by: NDamien Hedde <damien.hedde@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-7-damien.hedde@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a function resettable_change_parent() to do the required
plumbing when changing the parent a of Resettable object.

We need to make sure that the reset state of the object remains
coherent with the reset state of the new parent.

We make the 2 following hypothesis:
+ when an object is put in a parent under reset, the object goes in
reset.
+ when an object is removed from a parent under reset, the object
leaves reset.

The added function avoids any glitch if both old and new parent are
already in reset.
Signed-off-by: NDamien Hedde <damien.hedde@greensocs.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-6-damien.hedde@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This commit adds support of Resettable interface to buses and devices:
+ ResettableState structure is added in the Bus/Device state
+ Resettable methods are implemented.
+ device/bus_is_in_reset function defined

This commit allows to transition the objects to the new
multi-phase interface without changing the reset behavior at all.
Object single reset method can be split into the 3 different phases
but the 3 phases are still executed in a row for a given object.
From the qdev/qbus reset api point of view, nothing is changed.
qdev_reset_all() and qbus_reset_all() are not modified as well as
device_legacy_reset().

Transition of an object must be done from parent class to child class.
Care has been taken to allow the transition of a parent class
without requiring the child classes to be transitioned at the same
time. Note that SysBus and SysBusDevice class do not need any transition
because they do not override the legacy reset method.
Signed-off-by: NDamien Hedde <damien.hedde@greensocs.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-5-damien.hedde@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This commit defines an interface allowing multi-phase reset. This aims
to solve a problem of the actual single-phase reset (built in
DeviceClass and BusClass): reset behavior is dependent on the order
in which reset handlers are called. In particular doing external
side-effect (like setting an qemu_irq) is problematic because receiving
object may not be reset yet.

The Resettable interface divides the reset in 3 well defined phases.
To reset an object tree, all 1st phases are executed then all 2nd then
all 3rd. See the comments in include/hw/resettable.h for a more complete
description. The interface defines 3 phases to let the future
possibility of holding an object into reset for some time.

The qdev/qbus reset in DeviceClass and BusClass will be modified in
following commits to use this interface. A mechanism is provided
to allow executing a transitional reset handler in place of the 2nd
phase which is executed in children-then-parent order inside a tree.
This will allow to transition devices and buses smoothly while
keeping the exact current qdev/qbus reset behavior for now.

Documentation will be added in a following commit.
Signed-off-by: NDamien Hedde <damien.hedde@greensocs.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-4-damien.hedde@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Adds trace events to reset procedure and when updating the parent
bus of a device.
Signed-off-by: NDamien Hedde <damien.hedde@greensocs.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-3-damien.hedde@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Provide a temporary device_legacy_reset function doing what
device_reset does to prepare for the transition with Resettable
API.

All occurrence of device_reset in the code tree are also replaced
by device_legacy_reset.

The new resettable API has different prototype and semantics
(resetting child buses as well as the specified device). Subsequent
commits will make the changeover for each call site individually; once
that is complete device_legacy_reset() will be removed.
Signed-off-by: NDamien Hedde <damien.hedde@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Since we enabled parallel TCG code generation for softmmu (see
commit 3468b59e "tcg: enable multiple TCG contexts in softmmu")
and its subsequent fix (commit 72649619 "add .min_cpus and
.default_cpus fields to machine_class"), the raspi machines are
restricted to always use their 4 cores:

See in hw/arm/raspi2 (with BCM283X_NCPUS set to 4):

  222 static void raspi2_machine_init(MachineClass *mc)
  223 {
  224     mc->desc = "Raspberry Pi 2";
  230     mc->max_cpus = BCM283X_NCPUS;
  231     mc->min_cpus = BCM283X_NCPUS;
  232     mc->default_cpus = BCM283X_NCPUS;
  235 };
  236 DEFINE_MACHINE("raspi2", raspi2_machine_init)

We can no longer use the -smp option, as we get:

  $ qemu-system-arm -M raspi2 -smp 1
  qemu-system-arm: Invalid SMP CPUs 1. The min CPUs supported by machine 'raspi2' is 4

Since we can not set the TYPE_BCM283x SOC "enabled-cpus" with -smp,
remove the unuseful code.

We can achieve the same by using the '-global bcm2836.enabled-cpus=1'
option.
Reported-by: NLaurent Bonnans <laurent.bonnans@here.com>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20200120235159.18510-2-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Following the pattern of the work recently done with the ASPEED GPIO
model, this adds support for inspecting and modifying the PCA9552 LEDs
from the monitor.

 (qemu) qom-set  /machine/unattached/device[17] led0 on
 (qemu) qom-set  /machine/unattached/device[17] led0 off
 (qemu) qom-set  /machine/unattached/device[17] led0 pwm0
 (qemu) qom-set  /machine/unattached/device[17] led0 pwm1
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Message-id: 20200114103433.30534-6-clg@kaod.org
[clg: - removed the "qom-get" examples from the commit log
      - merged memory leak fixes from Joel ]
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The overhead for the OpenBMC firmware images using the a custom U-Boot
is around 2 seconds, which is fine, but with a U-Boot from mainline,
it takes an extra 50 seconds or so to reach Linux. A quick survey on
the number of reads performed on the flash memory region gives the
following figures :

  OpenBMC U-Boot      922478 (~ 3.5 MBytes)
  Mainline U-Boot   20569977 (~ 80  MBytes)

QEMU must be trashing the TCG TBs and reloading text very often. Some
addresses are read more than 250.000 times. Until we find a solution
to improve boot time, execution from MMIO is not activated by default.

Setting this option also breaks migration compatibility.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200114103433.30534-5-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

These buffers should be aligned on 16 bytes.

Ignore invalid RX and TX buffer addresses and log an error. All
incoming and outgoing traffic will be dropped because no valid RX or
TX descriptors will be available.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Message-id: 20200114103433.30534-4-clg@kaod.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Initialise another SDHCI model instance for the AST2600's eMMC
controller and use the SDHCI's num_slots value introduced previously to
determine whether we should create an SD card instance for the new slot.
Signed-off-by: NAndrew Jeffery <andrew@aj.id.au>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Message-id: 20200114103433.30534-3-clg@kaod.org
[ clg : - removed ternary operator from sdhci_attach_drive()
        - renamed SDHCI objects with a '-controller' prefix ]
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The AST2600 includes a second cut-down version of the SD/MMC controller
found in the AST2500, named the eMMC controller. It's cut down in the
sense that it only supports one slot rather than two, but it brings the
total number of slots supported by the AST2600 to three.

The existing code assumed that the SD controller always provided two
slots. Rework the SDHCI object to expose the number of slots as a
property to be set by the SoC configuration.
Signed-off-by: NAndrew Jeffery <andrew@aj.id.au>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Message-id: 20200114103433.30534-2-clg@kaod.org
[PMM: fixed up to use device_class_set_props()]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The guest can use the semihosting API to open a handle
corresponding to QEMU's own stdin, stdout, or stderr.
When the guest closes this handle, we should not
close the underlying host stdin/stdout/stderr
the way we would do if the handle corresponded to
a host fd we'd opened on behalf of the guest in SYS_OPEN.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200124172954.28481-1-peter.maydell@linaro.org

The num-lines property of the TYPE_OR_GATE device sets the number
of input lines it has. An assert() in or_irq_realize() restricts
this to the maximum supported by the implementation. However we
got the condition in the assert wrong: it should be using <=,
because num-lines == MAX_OR_LINES is permitted, and means that
all entries from 0 to MAX_OR_LINES-1 in the s->levels[] array
are used.

We didn't notice this previously because no user has so far
needed that many input lines.
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Message-id: 20200120142235.10432-1-peter.maydell@linaro.org

MIPS queue for January 29th, 2020

# gpg: Signature made Wed 29 Jan 2020 18:29:43 GMT
# gpg:                using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [full]
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01  DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-jan-29-2020:
  target/mips: Add implementation of GINVT instruction
  target/mips: Amend CP0 WatchHi register implementation
  hw/core/loader: Let load_elf() populate a field with CPU-specific flags
  target/mips: semihosting: Remove 'uhi_done' label in helper_do_semihosting()
  disas: Add a field for target-dependant data to disassemble_info
  target/mips: Rectify documentation on deprecating MIPS r4k machine
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Merge tpm 2020/01/29 v1

# gpg: Signature made Wed 29 Jan 2020 13:01:37 GMT
# gpg:                using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE  C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2020-01-29-1:
  tpm-ppi: page-align PPI RAM
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>