This uses extension of existing EPOW interrupt/event mechanism
to notify userspace tools like librtas/drmgr to handle
in-guest configuration/cleanup operations in response to
device_add/device_del.

Userspace tools that don't implement this extension will need
to be run manually in response/advance of device_add/device_del,
respectively.
Signed-off-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This enables hotplug of PCI devices to a PHB. Upon hotplug we
generate the OF-nodes required by PAPR specification and
IEEE 1275-1994 "PCI Bus Binding to Open Firmware" for the
device.

We associate the corresponding FDT for these nodes with the DRC
corresponding to the slot, which will be fetched via
ibm,configure-connector RTAS calls by the guest as described by PAPR
specification.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

We need to work with PCI BARs to generate OF properties
during PCI hotplug for sPAPR guests.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

These will be used to support hotplug/unplug of PCI devices to the PCI
bus associated with a particular PHB.

We also set up device-tree properties in each PHBs initial FDT to
describe the DRCs associated with them. This advertises to guests that
each PHB is DR-capable device with physical hotpluggable slots, each
managed by the corresponding DRC. This is necessary for allowing
hotplugging of devices to it later via bus rescan or guest rpaphp
hotplug module.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This option enables/disables PCI hotplug for a particular PHB.

Also add machine compatibility code to disable it by default for machine
types prior to pseries-2.4.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
[agraf: move commas for compat fields]
Signed-off-by: NAlexander Graf <agraf@suse.de>

This function handles generation of ibm,drc-* array device tree
properties to describe DRC topology to guests. This will by used
by the guest to direct RTAS calls to manage any dynamic resources
we associate with a particular DR Connector as part of
hotplug/unplug.

Since general management of boot-time device trees are handled
outside of sPAPRDRConnector, we insert these values blindly given
an FDT and offset. A mask of sPAPRDRConnector types is given to
instruct us on what types of connectors entries should be generated
for, since descriptions for different connectors may live in
different parts of the device tree.

Based on code originally written by Nathan Fontenot.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

We don't actually rely on this interface to surface hotplug events, and
instead rely on the similar-but-interrupt-driven check-exception RTAS
interface used for EPOW events. However, the existence of this interface
is needed to ensure guest kernels initialize the event-reporting
interfaces which will in turn be used by userspace tools to handle these
events, so we implement this interface here.

Since events surfaced by this call are mutually exclusive to those
surfaced via check-exception, we also update the RTAS event queue code
to accept a boolean to mark/filter for events accordingly.

Events of this sort are not currently generated by QEMU, but the interface
has been tested by surfacing hotplug events via event-scan in place
of check-exception.
Signed-off-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This extends the data structures currently used to report EPOW events to
guests via the check-exception RTAS interfaces to also include event types
for hotplug/unplug events.

This is currently undocumented and being finalized for inclusion in PAPR
specification, but we implement this here as an extension for guest
userspace tools to implement (existing guest kernels simply log these
events via a sysfs interface that's read by rtas_errd, and current
versions of rtas_errd/powerpc-utils already support the use of this
mechanism for initiating hotplug operations).

We also add support for queues of pending RTAS events, since in the
case of hotplug there's chance for multiple events being in-flight
at any point in time.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This interface is used to fetch an OF device-tree nodes that describes a
newly-attached device to guest. It is called multiple times to walk the
device-tree node and fetch individual properties into a 'workarea'/buffer
provided by the guest.

The device-tree is generated by QEMU and passed to an sPAPRDRConnector during
the initial hotplug operation, and the state of these RTAS calls is tracked by
the sPAPRDRConnector. When the last of these properties is successfully
fetched, we report as special return value to the guest and transition
the device to a 'configured' state on the QEMU/DRC side.

See docs/specs/ppc-spapr-hotplug.txt for a complete description of
this interface.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This is similar to the existing rtas_st_buffer(), but for cases
where the guest is not expecting a length-encoded byte array.
Namely, for calls where a "work area" buffer is used to pass
around arbitrary fields/data.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This interface allows a guest to read various platform/device sensors.
initially, we only implement support necessary to support hotplug:
reading of the dr-entity-sense sensor, which communicates the state of
a hotplugged resource/device to the guest (EMPTY/PRESENT/UNUSABLE).

See docs/specs/ppc-spapr-hotplug.txt for a complete description of
this interface.
Signed-off-by: NMike Day <ncmike@ncultra.org>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This interface allows a guest to control various platform/device
sensors. Initially, we only implement support necessary to control
sensors that are required for hotplug: DR connector indicators/LEDs,
resource allocation state, and resource isolation state.

See docs/specs/ppc-spapr-hotplug.txt for a complete description of
this interface.
Signed-off-by: NMike Day <ncmike@ncultra.org>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

These interfaces manage the power domains that guest devices are
assigned to and are used to power on/off devices. Currently we
only utilize 1 power domain, the 'live-insertion' domain, which
automates power management of plugged/unplugged devices, essentially
making these calls no-ops, but the RTAS interfaces are still required
by guest hotplug code and PAPR+.

See docs/specs/ppc-spapr-hotplug.txt for a complete description of
these interfaces.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This device emulates a firmware abstraction used by pSeries guests to
manage hotplug/dynamic-reconfiguration of host-bridges, PCI devices,
memory, and CPUs. It is conceptually similar to an SHPC device,
complete with LED indicators to identify individual slots to physical
physical users and indicate when it is safe to remove a device. In
some cases it is also used to manage virtualized resources, such a
memory, CPUs, and physical-host bridges, which in the case of pSeries
guests are virtualized resources where the physical components are
managed by the host.

Guests communicate with these DR Connectors using RTAS calls,
generally by addressing the unique DRC index associated with a
particular connector for a particular resource. For introspection
purposes we expose this state initially as QOM properties, and
in subsequent patches will introduce the RTAS calls that make use of
it. This constitutes to the 'guest' interface.

On the QEMU side we provide an attach/detach interface to associate
or cleanup a DeviceState with a particular sPAPRDRConnector in
response to hotplug/unplug, respectively. This constitutes the
'physical' interface to the DR Connector.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This adds a general overview of hotplug/dynamic-reconfiguration
for sPAPR/pSeries guest.

As specified in PAPR+ v2.7.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

hw_error() is designed for printing CPU-related error messages
(e.g. it also prints a full CPU register dump). For error messages
that are not directly related to CPU problems, a function like
error_report() should be used instead.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When specifying a non-existing file with the "-bios" parameter, QEMU
complained that it "could not find LPAR rtas". That's obviously a
copy-n-paste bug from the code which loads the spapr-rtas.bin, it
should complain about a missing firmware file instead.
Additionally the error message was printed with hw_error() - which
also dumps the whole CPU state. However, this does not make much
sense here since the CPU is not running yet and thus the registers
only contain zeroes. So let's use error_report() here instead.
And while we're at it, let's also bail out if the firmware file
had zero length.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Now that 2.4 development has opened, create a new pseries machine type
variant.  For now it is identical to the pseries-2.3 machine type, but
a number of new features are coming that will need to set backwards
compatibility options.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The check "liobn & 0xFFFFFFFF00000000ULL" in spapr_tce_find_by_liobn()
is completely useless since liobn is only declared as an uint32_t
parameter. Fix this by using target_ulong instead (this is what most
of the callers of this function are using, too).
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Useful for debugging.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This replaces object_child_foreach() and callback with existing
SPAPR_PCI_LIOBN() and spapr_tce_find_by_liobn() to make the code easier
to read.

This is a mechanical patch so no behaviour change is expected.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

At the moment spapr_tce_find_by_liobn() is used by H_PUT_TCE/...
handlers to find an IOMMU by LIOBN.

We are going to implement Dynamic DMA windows (DDW), new code
will go to a new file and we will use spapr_tce_find_by_liobn()
there too so let's make it public.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This makes find_phb()/find_dev() public and changed its names
to spapr_pci_find_phb()/spapr_pci_find_dev() as they are going to
be used from other parts of QEMU such as VFIO DDW (dynamic DMA window)
or VFIO PCI error injection or VFIO EEH handling - in all these
cases there are RTAS calls which are addressed to BUID+config_addr
in IEEE1275 format.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This is to reduce VIO noise while debugging PCI DMA.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This gets rid of a magic constant describing the default DMA window size
for an emulated PHB.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This introduces a macro which makes up a LIOBN from fixed prefix and
VIO device address (@reg property).

This is to keep LIOBN macros rendering consistent - the same macro for
PCI has been added by the previous patch.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

We are going to have multiple DMA windows per PHB and we want them to
migrate so we need a predictable way of assigning LIOBNs.

This introduces a macro which makes up a LIOBN from fixed prefix,
PHB index (unique PHB id) and window number.

This introduces a SPAPR_PCI_DMA_WINDOW_NUM() to know the window number
from LIOBN. It is used to distinguish the default 32bit windows from
dynamic windows and avoid picking default DMA window properties from
a wrong TCE table.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

PAPR is defined as big endian so TCEs need an adjustment so
does this patch.

This changes code to have ldq_be_phys() in one place.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The existing KVM_CREATE_SPAPR_TCE ioctl only support 4G windows max as
the window size parameter to the kernel ioctl() is 32-bit so
there's no way of expressing a TCE window > 4GB.

We are going to add huge DMA windows support so this will create small
window and unexpectedly fail later.

This disables KVM_CREATE_SPAPR_TCE for windows bigger that 4GB.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

spapr_pci.c contains a number of expressions of the form (uval == -1) or
(uval != -1), where 'uval' is an unsigned value.

This mostly works in practice, because as long as the width of uval is
greater or equal than that of (int), the -1 will be promoted to the
unsigned type, which is the expected outcome.

However, at least for the cases where uval is uint32_t, this would break
on platforms where sizeof(int) > 4 (and a few such do exist), because then
the uint32_t value would be promoted to the larger int type, and never be
equal to -1.

This patch fixes these errors.  The fixes for the (uint32_t) cases are
necessary as described above.  I've made similar fixes to (uint64_t) and
(hwaddr) cases.  Those are strictly theoretical, since I don't know of any
platforms where sizeof(int) > 8, but hey, it's not that hard so we might
as well be strictly C standard compliant.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Some recent patches require a function from libfdt version 1.4.0,
so we should check for this version during the configure step
already. Unfortunately, there does not seem to be a proper #define
for the version number in the libfdt headers. So alternatively,
we check for the availability of the required function
fdt_get_property_by_offset() instead instead.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Since some recent patches require libfdt version 1.4.0,
let's update the dtc submodule to this version.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Convert device models "macio-oldworld" and "macio-newworld".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This fixes a compile warning from clang 3.5 (the assertion
could never fire).
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1432881807-18164-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
[PMM: added note in commit message that this is fixing a build warning]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio-input: two small fixups

# gpg: Signature made Tue Jun  2 09:32:51 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-input-20150602-1:
  virtio-input: make virtio devices follow usual naming convention
  virtio-input: const_le16 and const_le32 not build time constant
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pc build fix

My last pull breaks build on systems with iasl.
Fix this up.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon Jun  1 20:41:08 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  acpi: add missing ssdt
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

As the implementation of const_le16 and const_le32 is not build time constant
on big endian systems this need to be fixed.

  CC    hw/input/virtio-input-hid.o
hw/input/virtio-input-hid.c:340:13: error: initializer element is not constant
hw/input/virtio-input-hid.c:340:13: error: (near initialization for ‘virtio_keyboard_config[1].u.ids.bustype’)
...
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

commit 5cb18b3d
    TPM2 ACPI table support

was missing a file, so build with iasl fails
(build without iasl works since it uses the generated
 hex files).
Reported-by: N"Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

pc, pci, tpm, virtio, vhost enhancements and fixes

A bunch of cleanups and fixes all over the place,
enhancements in TPM, virtio and vhost.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon Jun  1 13:19:48 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (60 commits)
  vhost-user: add multi queue support
  virtio: make features 64bit wide
  qdev: add 64bit properties
  virtio-mmio: ioeventfd support
  hw/acpi/aml-build: Fix memory leak
  acpi: add aml_while() term
  acpi: add aml_increment() term
  acpi: add aml_shiftright() term
  acpi: add aml_shiftleft() term
  acpi: add aml_index() term
  acpi: add aml_lless() term
  acpi: add aml_add() term
  TPM2 ACPI table support
  tpm: Probe for connected TPM 1.2 or TPM 2
  Extend TPM TIS interface to support TPM 2
  Add stream ID to MSI write
  acpi: Simplify printing to dynamic string
  i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wanted
  i386/pc_q35: don't insist on board FDC if there's no default floppy
  i386/pc: '-drive if=floppy' should imply a board-default FDC
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>