Convert the cp15 crn=7 registers to the new scheme.
Note that to do this we have to distinguish some registers
used on the ARM9 and ARM10 from some which are ARM1176
only. This is because the old code returned a value of 0
but always set the Z flag (by clearing env->ZF, since we
store the Z flag in CPUState inverted). This is inconsistent
with actual ARM CPU behaviour, which only sets flags for
reads to r15 and sets them based on the top bits of the result.
However it happened to work for the two common use cases for
cp15 crn=7 reads:
 * On ARM9 and ARM10 the cache clean-and-test operations are
typically done with a destination of r15 so that you can do
a "loop: mrc ... ; bne loop" to keep cleaning until the cache
is finally clean; always setting the Z flag means this loop
terminates immediately
 * on ARM1176 the Cache Dirty Status Register reads as zero
if the cache is dirty; returning 0 means this is correctly
implemented for QEMU

Since the new coprocessor register framework does the right
thing of always setting flags based on the returned result
for reads to r15, we need to split these up so that we can
return (1<<30) for the ARM9/ARM10 registers but 0 for the
ARM1176 one.

This allows us to remove the nasty hack which always sets Z.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 VA-PA translation registers (a subset of
the crn=7 regs) to the new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert cp15 MMU TLB control (crn=8) to new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 crn=15 (implementation specific) registers
to the new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We RAZ/WI the entire block of crn=10 registers. Note that this
actually covers not just the implementation-defined TLB
lockdown registers but also a number of v7 VMSA memory
attribute registers which we would need to implement to
support TEX remap. We retain the previous QEMU behaviour
in this conversion, though.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 crn=13 registers (FCSEIDR, CONTEXTIDR,
and the ARM946 Trace Process Identifier Register).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 crn=2 registers (MMU page table control,
MPU cache control) to the new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the MMU fault status and MPU access permission cp15
registers to the new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 c3 register (MMU domain access control
or MPU write buffer control). NB that this is horribly
underdecoded for modern cores (should be crn=3,crm=0,
opc1=0,opc2=0) but this change preserves the existing
QEMU behaviour.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the (dummy) generic timer cp15 implementation.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the v7 performance monitor cp15 registers to
the new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert TLS registers to the new cp15 framework
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the various WFI and barrier instruction special cases to use
cp_reginfo infrastructure.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the THUMB2EE cp14 registers TEECR and TEEHBR to
use arm_cp_reginfo.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp14 debug registers (DBGDIDR, DBGDRAR, DBGDSAR) to the
cp_reginfo scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add new function register_cp_regs_for_features() as a place to
register coprocessor registers dependent on feature flags.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

All the users of cpu_arm_set_cp_io have been converted, so we
can remove it and the infrastructure it used.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the coprocessor access functions for the pxa2xx PIC to the
arm_cp_reginfo scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the PXA2xx CLKCFG and PWRMODE cp14 registers to the
new arm_cp_reginfo scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the PXA2xx cp14 perf registers from old-style
coprocessor hooks to the new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Initial infrastructure for data-driven registration of
coprocessor register implementations.

We still fall back to the old-style switch statements pending
complete conversion of all existing registers.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make the 11MPCore report a valid value in its cache type register
(the previous value appears to have been incorrectly copied from
the 1136/1176). In particular, do not report that we have an
aliasing VIPT cache, because this causes Linux to attempt to use
the v6 block cache ops which the 11MPCore doesn't actually have.
(This causes no problems currently because we over-broadly provide
those ops on all cores, but prevents us correctly narrowing the
block ops down to those cores which actually implement them.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

QEMU exposes its version to the guest's hardware and in some cases that is wrong
(e.g. Windows prints messages about driver updates when you switch
the QEMU version).
There is a new field now on the struct QEmuMachine, hw_version, which may
contain the version that the specific machine should report. If that field is
set, then that machine will report that version to the guest.
Signed-off-by: NCrístian Viana <vianac@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds two things. First it allows QEMU to distinguish between
regular powerdown and S4 powerdown. Later separate QMP notification will
be added for S4 powerdown. Second it allows S3/S4 states to be disabled
from QEMU command line. Some guests known to be broken with regards to
power management, but allow to use it anyway. Using new properties
management will be able to disable S3/S4 for such guests.

Supported system state are passed to a firmware using new fw_cfg file.
The file contains  6 byte array. Each byte represents one system
state. If byte at offset X has its MSB set it means that system state
X is supported and to enter it guest should use the value from lowest 3
bits.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

I think I understand enough of what's going on in these rules to ensure this is
right.  But I could certainly use a second or third opinion...
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fedora 17's toolchain wants optimization enabled for _FORTIFY_SOURCE;
so disable _FORTIFY_SOURCE when debugging.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* afaerber-or/qom-next-2: (22 commits)
  qom: Push error reporting to object_property_find()
  qdev: Remove qdev_prop_exists()
  qbus: Initialize in standard way
  qbus: Make child devices links
  qdev: Connect busses with their parent devices
  qdev: Convert busses to QEMU Object Model
  qdev: Move SysBus initialization to sysbus.c
  qdev: Use wrapper for qdev_get_path
  qdev: Remove qdev_prop_set_defaults
  qdev: Clean up global properties
  qdev: Move bus properties to abstract superclasses
  qdev: Move bus properties to a separate global
  qdev: Push "type" property up to Object
  arm_l2x0: Rename "type" property to "cache-type"
  m48t59: Rename "type" property to "model"
  qom: Assert that public types have a non-NULL parent field
  qom: Drop type_register_static_alias() macro
  qom: Make Object a type
  qom: Add class_base_init
  qom: Add object_child_foreach()
  ...

* qmp/queue/qmp:
  build: install qmp-commands.txt
  Add rate limiting of RTC_CHANGE, BALLOON_CHANGE & WATCHDOG events
  Add event notification for guest balloon changes
  Fix some more license versions (GPL2+ instead of GPL2)
  monitor: Fix memory leak with readline completion
  qmp: do not include monitor.h from qapi-types-core.h
  qmp: include monitor.h when needed
  kvm: add missing include files

* kwolf/for-anthony: (39 commits)
  qemu-iotests: add 036 autoclear feature bit test
  qemu-iotests: add qcow2.py set-feature-bit command
  fdc-test: introduced qtest read_without_media
  fdc: fix implied seek while there is no media in drive
  qcow2: fix autoclear image header update
  xen: Don't peek behind the BlockDriverState abstraction
  xen: Don't change -drive if=xen device name during machine init
  block: Replace bdrv_get_format() by bdrv_get_format_name()
  qemu-img: document qed format on qemu-img man page
  qemu-iotests: COW with many AIO requests on the same cluster
  qemu-iotests: Some backing file COW tests
  qcow2: Fix avail_sectors in cluster allocation code
  qcow2: Simplify calculation for COW area at the end
  qcow2: always operate caches in writeback mode
  ide: support enable/disable write cache
  block: always open drivers in writeback mode
  block: add bdrv_set_enable_write_cache
  block: copy enable_write_cache in bdrv_append
  savevm: flush after saving vm state
  block: flush in writethrough mode after writes
  ...

* mst/tags/for_anthony:
  pci_bridge_dev: fix error path in pci_bridge_dev_initfn()
  qdev: release parent properties on dc->init failure
  msi: Use msi/msix_present more consistently
  msi: Invoke msi/msix_write_config from PCI core
  msi: Guard msi/msix_write_config with msi_present
  msi: Invoke msi/msix_reset from PCI core
  msi: Guard msi_reset with msi_present
  ahci: Clean up reset functions
  intel-hda: Fix reset of MSI function
  ahci: Fix reset of MSI function
  rtl8139: honor RxOverflow flag in can_receive method
  shpc: unparent device before free

* sweil/for-anthony:
  Fix some more license versions (GPL2+ instead of GPL2)
  dump: Fix license version (GPL2+ instead of GPL2)
  configure: Fix build for some versions of glibc (9pfs)
  monitor: Fix memory leak with readline completion

Avoids duplicated error_set().
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Also drop error_set() in object_property_del().]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Can be replaced everywhere with object_property_find().
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Move code to an initfn and finalizer.
Replace do_qbus_create_inplace() with qbus_realize().
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Make qbus children show up as link<> properties.  There is no stable
addressing for qbus children so we use an unstable naming convention.

This is okay in QOM though because the composition name is expected to
be what's stable.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This makes SysBus part of the root hierarchy and all busses children of
their respective parent DeviceState.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This is far less interesting than it sounds.  We simply add an Object to each
BusState and then register the types appropriately.  Most of the interesting
refactoring will follow in the next patches.

Since we're changing fundamental type names (BusInfo -> BusClass), it all needs
to convert at once.  Fortunately, not a lot of code is affected.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Made all new bus TypeInfos static const.]
[AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

TYPE_SYSTEM_BUS will be local to hw/sysbus.c, so move existing references
to main_system_bus and system_bus_info there.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This makes it easier to remove it from BusInfo.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Instead, qdev_property_add_static can set the default.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>