Unbreaks relative mouse mode with SDL.
Reported-by: NGabriel L. Somlo <gsomlo@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

* remotes/kvaneesh/for-upstream:
  hw/9pfs: Include virtio-9p-device.o in build
  hw/9pfs: use g_strdup_printf() instead of PATH_MAX limitation
  hw/9pfs/virtio-9p-local.c: use snprintf() instead of sprintf()
  hw/9pfs/virtio-9p-local.c: move v9fs_string_free() to below "err_out:"
  fsdev: Fix overrun after readlink() fills buffer completely
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block patches

# gpg: Signature made Fri 07 Mar 2014 13:30:04 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  block: qemu-iotests 085 - live snapshots tests
  hw/ide/ahci.h: Avoid shifting left into sign bit
  block: Fix error path segfault in bdrv_open()
  qemu-iotests: Test a few blockdev-add error cases
  blockdev: Fix NULL pointer dereference in blockdev-add
  blockdev: Fail blockdev-add with encrypted images
  block/raw-win32: Strip "file:" prefix on creation
  block/raw-win32: Implement bdrv_parse_filename()
  block/raw-posix: Strip "file:" prefix on creation
  block/raw-posix: Implement bdrv_parse_filename()
  block: Keep "filename" option after parsing
  block: mirror - remove code cruft that has no function
  block: make bdrv_swap rebuild the bs graph node list field.
  block: Fix bs->request_alignment assertion for bs->sg=1
  iscsi: Use bs->sg for everything else than disks
  qemu-iotests: Test progress output for conversion
  qemu-img convert: Fix progress output
  gluster: Remove unused defines and header include
  gluster: Change licence to GPLv2+
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Pass all the relevant sub-directory make variables.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20140120112153.5685.30949.stgit@fimbulvetr.bsc.es

In commit 5643706a (console: add head
to index to qemu consoles.) graphic_console_init() was extended to take
an additional argument, but xenfb was not updated accordingly. Fix it.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NDon Slutz <dslutz@verizon.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1394228528-31625-1-git-send-email-afaerber@suse.de

Input handling rewrite.
SDL2 support.

# gpg: Signature made Wed 05 Mar 2014 11:16:08 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-input-4: (38 commits)
  ui/sdl2 : initial port to SDL 2.0 (v2.0)
  console: add QemuUIInfo
  console: add head to index to qemu consoles.
  input: remove index_from_keycode (no users)
  input: move do_mouse_set to new core
  input: move qmp_query_mice to new core
  input: add input_mouse_mode tracepoint
  input: move mouse mode notifier to new core
  input-legacy: remove kbd_mouse_event
  input-legacy: remove kbd_mouse_is_absolute
  input-legacy: remove kbd_mouse_has_absolute
  input-legacy: remove kbd_put_keycode
  input: trace events
  input: mouse: switch cocoa ui to new core
  input: keyboard: switch cocoa ui to new core
  input: mouse: switch monitor to new core
  input: mouse: switch spice ui to new core
  input: mouse: switch vnc ui to new core
  input: mouse: switch sdl ui to new core
  input: mouse: switch gtk ui to new core
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Patch queue for ppc - 2014-03-05

This pull request includes:

  - VSX emulation support
  - book3s pr/hv selection
  - some bug fixes
  - qdev stable numbering
  - eTSEC emulation

# gpg: Signature made Wed 05 Mar 2014 02:14:19 GMT using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found

* remotes/agraf/tags/signed-ppc-for-upstream: (130 commits)
  target-ppc: spapr: e500: fix to use cpu_dt_id
  target-ppc: add PowerPCCPU::cpu_dt_id
  target-ppc: Introduce hypervisor call H_GET_TCE
  target-ppc: Update ppc_hash64_store_hpte to support updating in-kernel htab
  target-ppc: Change the hpte store API
  target-ppc: Fix page table lookup with kvm enabled
  target-ppc: Fix htab_mask calculation
  target-ppc: Use Additional Temporary in stqcx Case
  target-ppc: Fix Compiler Warnings Due to 64-Bit Constants Declared as UL
  PPC: sPAPR: Only use getpagesize() when we run with kvm
  target-ppc/translate.c: Use ULL suffix for 64 bit constants
  spapr-vlan: flush queue whenever can_receive can go from false to true
  target-ppc: Altivec 2.07: Vector Permute and Exclusive OR
  target-ppc: Altivec 2.07: Vector SHA Sigma Instructions
  target-ppc: Altivec 2.07: AES Instructions
  target-ppc: Altivec 2.07: Binary Coded Decimal Instructions
  target-ppc: Altivec 2.07: Vector Polynomial Multiply Sum
  target-ppc: Altivec 2.07: Vector Gather Bits by Bytes
  target-ppc: Altivec 2.07: Doubleword Compares
  target-ppc: Altivec 2.07: vbpermq Instruction
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

One patch introducing support for adapter interrupts in virtio-ccw.

This improves performance for those guests that issue the new
CCW_CMD_SET_IND_ADAPTER channel command.

# gpg: Signature made Wed 05 Mar 2014 08:48:18 GMT using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found

* remotes/cohuck/tags/virtio-ccw-20140305:
  s390x/virtio-ccw: Adapter interrupt support.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.

The snapshots are done through the QMP interface, using the
following commands for snapshots:

Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
             { 'device': 'virtio0', 'snapshot-file':'...',
               'format': 'qcow2' } }"

Group snapshot:
{ 'execute': 'transaction', 'arguments':
              {'actions': [
                  { 'type': 'blockdev-snapshot-sync', 'data' :
                    { 'device': 'virtio0', 'snapshot-file': '...' } },
                  { 'type': 'blockdev-snapshot-sync', 'data' :
                    { 'device': 'virtio1', 'snapshot-file': '...' } } ]
             } }
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add 'U' suffixes to avoid undefined behaviour shifting left into
the signed bit of a signed integer type. Clang's sanitizer will
warn about this:

 hw/ide/ahci.c:1210:27: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

MacOSX doesn't pull .o files from .a archives if the symbol that it
requires is one which the .o file defines as a common symbol.
(Common symbols are those declared without "extern"; the linker
will merge together common symbols with the same name, so
redeclaring the same variable in two compilation units results in
them referring to the same symbol rather than a compilation error).

This MacOSX difference from traditional linker behaviour means that
"make check" produces link errors:

Undefined symbols for architecture x86_64:
  "_cur_mon", referenced from:
      _error_vprintf in libqemuutil.a(qemu-error.o)
      _error_printf in libqemuutil.a(qemu-error.o)
      _error_printf_unless_qmp in libqemuutil.a(qemu-error.o)
      _error_print_loc in libqemuutil.a(qemu-error.o)
      _error_report in libqemuutil.a(qemu-error.o)
ld: symbol(s) not found for architecture x86_64

in this case because "cur_mon" is a common symbol in
libqemustub.a(mon-set-error.o).

In QEMU we don't make any use at all of the common symbol
functionality, so we can avoid this problem entirely simply
by compiling with -fno-common. Enable this option for all
builds, not just MacOSX, so that if we ever inadvertently
introduce multiple definitions of some variable that will
be immediately spotted as a build error rather than only
breaking the MacOSX build.
Suggested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-id: 1393451610-24617-1-git-send-email-peter.maydell@linaro.org

gcc's C++ compiler complains about being passed some -W options
which make sense for C but not for C++. This means we mustn't try
a C++ compile with QEMU_CFLAGS, but only with a filtered version
that removes the offending options. This filtering was already being
done for uses of C++ in the build itself, but was omitted for the
"does C++ work?" configure test. This only showed up when doing
builds which explicitly enabled -Werror with --enable-werror,
because the "do the compilers work" tests were mistakenly placed
above the "default werror based on whether compiling from git" code.
Another error in this category is that clang warns if you ask it to
compile C++ code from a file named "foo.c". Further, because we
were running do_cc in a subshell in the condition part of an "if",
the error_exit inside do_compiler wouldn't terminate configure and
we would plunge on regardless. Fix this complex of errors:

1. Move the default-werror code up so that there are no invocations
of compile_object and friends between it and the point where we
set $werror explicitly based on the --enable-werror command line
option.

2. Provide a mechanism for filtering QEMU_CFLAGS to create
QEMU_CXXFLAGS, and use it for the test we run here.

3. Provide a do_cxx function to run a test with the C++ compiler
rather than doing cute tricks with subshells and do_cc.

4. Use a new temporary file TMPCXX for the C++ program fragment.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org
Tested-by: NAndreas Färber <afaerber@suse.de>

Using an invalid option for a block device that is opened with
BDRV_O_PROTOCOL led to drv = NULL, and when trying to include the driver
name in the error message, qemu dereferenced it:

    $ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,file.foo=bar
    Segmentation fault (core dumped)

With this patch applied, the expected error message is printed:

    $ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,file.foo=bar
    qemu-system-x86_64: -drive file=/tmp/test.qcow2,file.foo=bar: could
    not open disk image /tmp/test.qcow2: Block protocol 'file' doesn't
    support the option 'foo'
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

If aio=native, we check that cache.direct is set as well. If however
cache wasn't specified at all, qemu just segfaulted.

The old condition didn't make any sense anyway because it effectively
only checked for the default cache mode case, but not for an explicitly
set cache.direct=off mode.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NEric Blake <eblake@redhat.com>

Encrypted images need a password before they can be used, and we don't
want blockdev-add to create BDSes that aren't fully initialised. So for
now simply forbid encrypted images; we can come back to it later if we
need the functionality.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

The bdrv_create() implementation of the block/raw-win32 "file" protocol
driver should strip the "file:" prefix from filenames if present.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The "file" protocol driver should strip the "file:" prefix from
filenames if present.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The bdrv_create() implementation of the block/raw-posix "file" protocol
driver should strip the "file:" prefix from filenames if present.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The "file" protocol driver should strip the "file:" prefix from
filenames if present.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently, bdrv_file_open() always removes the "filename" option from
the options QDict after bdrv_parse_filename() has been (successfully)
called. However, for drivers with bdrv_needs_filename, it makes more
sense for bdrv_parse_filename() to overwrite the "filename" option and
for bdrv_file_open() to fetch the filename from there.

Since there currently are no drivers that implement
bdrv_parse_filename() and have bdrv_needs_filename set, this does not
change current behavior.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Originally, this built up the error message with the backing filename,
so that errp was set as follows:
    error_set(errp, QERR_OPEN_FILE_FAILED, backing_filename);

However, we now propagate the local_error from the
bdrv_open_backing_file() call instead, making these 2 lines useless
code.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Moving only the node_name one field could lead to some inconsitencies where a
node_name was defined on a bs which was not registered in the graph node list.

bdrv_swap between a named node bs and a non named node bs would lead to this.

bdrv_make_anon would then crash because it would try to remove the bs from the
graph node list while it is not in it.

This patch remove named node bses from the graph node list before doing the swap
then insert them back.
Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

For sg backends, bs->request_alignment is meaningless and may be 0.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

The current iscsi block driver code makes the rather arbitrary decision
that TYPE_MEDIUM_CHANGER and TYPE_TAPE devices have bs->sg = 1 and all
other device types are disks.

Instead of this, check for TYPE_DISK to expose the disk interface and
make everything else bs->sg = 1. In particular, this includes devices
with TYPE_STORAGE_ARRAY, which is what LUN 0 of an iscsi target is.
(See https://bugzilla.redhat.com/show_bug.cgi?id=1067784 for the exact
scenario.)
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Initialise progress output only when the -p and -q options have already
been parsed, otherwise it's always disabled.
Reported-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Remove the definitions of GLUSTER_FD_WRITE and GLUSTER_FD_READ which are
no longer used. Also sockets.h isn't needed any more.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Pipe handling mechanism in gluster driver was based on similar implementation
in RBD driver and hence had GPLv2 and associated copyright information.
After changing gluster driver to coroutine based implementation, the pipe
handling code no longer exists and hence change gluster driver's licence to
GPLv2+ and remove RBD copyrights.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.

The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.

Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,

I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.

v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor

v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes & improvements by kraxel:
 * baum build fix
 * remove text console logic
 * adapt to new input core
 * codestyle fixups
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This removes the last user of the lecagy input mouse handler list,
so we can remove more legacy bits with this.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>