- 15 2月, 2014 2 次提交
-
-
由 Sebastian Huber 提交于
A lot of real world LEON3 systems are shipped with the GRMON boot loader. This boot loader initializes the stack pointer with the end of RAM address. The application can use this to detect the RAM size of a particular board variant. Signed-off-by: NSebastian Huber <sebastian.huber@embedded-brains.de> Reviewed-by: NFabien Chouteau <chouteau@adacore.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Stefan Weil 提交于
Signed-off-by: NStefan Weil <sw@weilnetz.de> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 14 2月, 2014 1 次提交
-
-
由 Alexander Graf 提交于
We now have to pass an address space to our _phys helpers. During the transition apparently the EPR exit path missed out, so let's put it there. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 13 2月, 2014 4 次提交
-
-
由 Peter Maydell 提交于
acpi,pc,pci fixes and enhancements Most changes here are hotplug related: This merges hotplug infrastructure changes by Igor, some acpi related fixes, and PC fixes. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 10 Feb 2014 09:13:26 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: ACPI: Remove commented-out code from HPET._CRS hw/pci: switch to a generic hotplug handling for PCIDevice pci/pcie: convert PCIE hotplug to use hotplug-handler API pci/shpc: convert SHPC hotplug to use hotplug-handler API acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API qdev:pci: refactor PCIDevice to use generic "hotpluggable" property hw/acpi: move typeinfo to the file end qdev: add "hotpluggable" property to Device qdev: add to BusState "hotplug-handler" link define hotplug interface loader: document that errno is set pc.c: better error message on initrd sizing failure pc_piix: enable legacy hotplug for Xen qtest: don't report signals if qtest driver enabled hw:piix4:acpi: reuse pcihp code for legacy PCI hotplug pcihp: remove unused AcpiPciHpPciStatus.device_present field pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplug pcihp: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDR pcihp: replace enable|disable_device() with oneliners pcihp: reduce number of device check events Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
PReP machine and devices * Cleanups for Raven PCI host bridge * Removal of PReP machine and devices from qemu-system-ppcemb # gpg: Signature made Mon 10 Feb 2014 16:19:03 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/prep-for-upstream: prep: Drop from ppcemb-softmmu raven: Use constant PCI_NUM_PINS instead of 4 prep: Kill get_system_io() usage Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* remotes/alon/pull-libcacard.glusterfs: libcacard: Don't link with all libraries QEMU links to Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Block patches # gpg: Signature made Sun 09 Feb 2014 08:12:51 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-anthony: block: Fix 32 bit truncation in mark_request_serialising() blkdebug: Don't leak bs->file on failure block: Don't call ROUND_UP with negative values block: bdrv_aligned_pwritev: Assert overlap range block: Fix memory leaks in bdrv_co_do_pwritev() raw: Fix BlockLimits passthrough qemu-iotests: add test for qcow2 preallocation with different cluster sizes qcow2: check for NULL l2meta qcow2: fix offset overflow in qcow2_alloc_clusters_at() qcow2: remove n_start and n_end of qcow2_alloc_cluster_offset() block/iscsi: always fill bs->bl.opt_transfer_length block: Fail gracefully with missing filename qemu-iotests: enable support for NFS protocol qemu-iotests: enable test 016 and 025 to work with NFS protocol qemu-iotests: blacklist test 020 for NFS protocol qemu-iotests: change _supported_proto to file for various tests block: add native support for NFS qemu-iotest: Make 077 raw-only Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 11 2月, 2014 22 次提交
-
-
由 Edgar E. Iglesias 提交于
This is to allow future patches to set properties before cpu::realize(). Reviewed-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
No functional change. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Peter Maydell 提交于
target-arm queue: * more A64 Neon instructions * AArch32 VCVTB and VCVTT ARMv8 instructions * fixes to inaccuracies in GIC emulation * libvixl disassembler for A64 * Allwinner SoC ethernet controller * zynq software system reset support # gpg: Signature made Sat 08 Feb 2014 15:53:05 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140208: (29 commits) arm/zynq: Add software system reset via SCLR hw/arm/allwinner-a10: initialize EMAC hw/net: add support for Allwinner EMAC Fast Ethernet controller util/fifo8: clear fifo head upon reset util/fifo8: implement push/pop of multiple bytes disas: Implement disassembly output for A64 disas/libvixl: Fix upstream libvixl compilation issues disas: Add subset of libvixl sources for A64 disassembler rules.mak: Link with C++ if we have a C++ compiler rules.mak: Support .cc as a C++ source file suffix arm_gic: Add GICC_APRn state to the GICState vmstate: Add uint32 2D-array support arm_gic: Support setting/getting binary point reg arm_gic: Keep track of SGI sources arm_gic: Fix GIC pending behavior target-arm: Add support for AArch32 64bit VCVTB and VCVTT target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc group target-arm: A64: Add 2-reg-misc REV* instructions target-arm: A64: Add narrowing 2-reg-misc instructions target-arm: A64: Implement 2-reg-misc CNT, NOT and RBIT ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* remotes/kvaneesh/for-upstream: hw/9pfs: fix P9_STATS_GEN handling hw/9pfs: make get_st_gen() return ENOTTY error on special files hw/9pfs: handle undefined FS_IOC_GETVERSION case in handle_ioc_getversion() hw/9pfs: fix error handing in local_ioc_getversion() Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Paolo Bonzini 提交于
Commit 360e607b (address_space_translate: do not cross page boundaries, 2014-01-30) broke MMIO accesses in cases where the section is shorter than the full register width. This can happen for example with the Bochs DISPI registers, which are 16 bits wide but have only a 1-byte long MemoryRegion (if you write to the "second byte" of the register your access is discarded; it doesn't write only to half of the register). Restrict the action of commit 360e607b to direct RAM accesses. This is enough for Xen, since MMIO will not go through the mapcache. Reported-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Andreas Färber 提交于
ppcemb covers only embedded processors, which does not include PReP. Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
-
- 10 2月, 2014 11 次提交
-
-
由 Gabriel L. Somlo 提交于
IRQNoFlags on HPET._CRS crashes WinXP because it causes the HPET to conflict with the system timer and/or the RTC. It only occurs on Apple hardware, and even there it is exposed fully only when OS X is detected (via _OSI). Recent OS X versions work on QEMU without this statement, so at this time there is no need to find a better way to conditionally include the statement. This patch removes the commented out (and wrong, should have been {0, 8}) statement from HPET._CRS. Signed-off-by: NGabriel Somlo <somlo@cmu.edu> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-By: NIgor Mammedov <imammedo@redhat.com>
-
由 Igor Mammedov 提交于
make qdev_unplug()/device_set_realized() to call hotplug handler's plug/unplug methods if available and remove not needed anymore hot(un)plug handling from PCIDevice. In case if hotplug handler is not available, revert to the legacy hotplug method for compatibility with not yet converted buses. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Split pcie_cap_slot_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCIE_SLOT device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Split shpc_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCI_BRIDGE_DEV device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Split piix4_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PIIX4_PM device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PIIX4_PM device. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use generic DeviceClass.hotpluggable field instead. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
do so to avoid not necessary forward declarations and place typeinfo registration at the file end where it's usually expected. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Currently it's possible to make PCIDevice not hotpluggable by using no_hotplug field of PCIDeviceClass. However it limits this only to PCI devices and prevents from generalizing hotplug code. So add similar field to DeviceClass so it could be reused with other Devices and would allow to replace PCI specific hotplug callbacks with generic implementation. Following patches will replace PCIDeviceClass.no_hotplug with this new property. In addition expose field as "hotpluggable" readonly property, to make it possible to read its value via QOM interface. Make DeviceClass hotpluggable by default as it was assumed before. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
It will allow to reuse field with different BUSes, reducing code duplication. Field is intended for replacing 'hotplug_qdev' field in PCIBus and also will allow to avoid adding equivalent field to DimmBus with possiblitity to refactor other BUSes to use it instead of custom field. In addition once all users of allow_hotplug field are converted to new API, link could replace allow_hotplug field in qdev hotplug code. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Provide a generic hotplug interface for hotplug handlers. Intended for replacing hotplug mechanism used by PCI/PCIE/SHPC code and will be used for memory hotplug. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
Document that get_image_size sets errno on failure. Suggested-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-