Functions pci_vga_init() and pci_cirrus_vga_init() are declared
in pc.h. That prevents other platforms (e.g. sPAPR) to use them.

This patch is to create one new file vga-pci.h and move the
declarations to vga-pci.h, so that they can be shared by
all platforms. This patch also cleans up on all platforms.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This reverts commit 518c7fb4. It breaks
new Linux guests with SMP, because IPIs get mapped to large vectors which
our MPIC emulation does not implement.

Conflicts:

	hw/ppc/e500.c

Currently for powerpc, kvm_arch_handle_exit() always returns 1, meaning
that its caller - kvm_cpu_exec() - will always exit immediately afterwards
to the loop in qemu_kvm_cpu_thread_fn().

There's no need to do this.  Once we've handled the hypercall there's no
reason we can't go straight around and KVM_RUN again, which is what ret = 0
will signal.  The only exception might be for hypercalls which affect the
state of cpu_can_run(), however the only one that might do this is H_CEDE
and for kvm that is always handled in the kernel, not qemu.

Furtherm setting ret = 0 means that when exit_requested is set from a
hypercall, we will enter KVM_RUN once more with a signal which lets the
the kernel do its internal logic to complete the hypercall with out
actually executing any more guest code.  This is important if our hypercall
also triggered a reset, which previously would re-initialize everything
without completing the hypercall.  This caused the kernel to get confused
because it thought the guest was still in the middle of a hypercall when
it has actually been reset.

This patch therefore changes to ret = 0, which is both a bugfix and a small
optimization.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This gives the kernel a paravirtualized machine to target, without
requiring both sides to pretend to be targeting a specific board
that likely has little to do with the host in KVM scenarios.  This
avoids the need to add new boards to QEMU, just to be able to
run KVM on new CPUs.
Signed-off-by: NScott Wood <scottwood@freescale.com>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently the only mpc8544ds-ism that is factored out is
toplevel compatible and model.  In the future the generic e500
code is expected to become more generic.
Signed-off-by: NScott Wood <scottwood@freescale.com>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: NAlexander Graf <agraf@suse.de>

No functional changes -- machine is still outwardly mpc8544ds.

The references that are not changed contain mpc8544 hardware details that
need to be parameterized if/when a different e500 platform wants to
change them.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Rename the file (with no changes other than fixing up the header paths)
in preparation for refactoring into a generic e500 platform.  Also move
it into the newly created ppc/ directory.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: NAlexander Graf <agraf@suse.de>

spapr_populate_pci_devices() populates the device tree only with bus
properties and has nothing to do with the devices on it as PCI BAR
allocation is done by the system firmware (SLOF).

New name - spapr_populate_pci_dt() - describes the functionality better.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The PCIHostState struct already contains SysBusDevice so
the one in sPAPRPHBState has to go.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

* origin/master:
  linux-user: ARM: Ignore immediate value for svc in thumb mode
  linux-user: Use init_guest_space when -R and -B are specified
  linux-user: Factor out guest space probing into a function
  flatload: fix bss clearing
  linux-user: make host_to_target_cmsg support SO_TIMESTAMP cmsg_type
  linux-user: make do_setsockopt support SOL_RAW ICMP_FILTER socket option
  linux-user: pass sockaddr from host to target
  x86: switch to AREG0 free mode
  x86: avoid AREG0 in segmentation helpers
  x86: avoid AREG0 for misc helpers
  x86: use wrappers for memory access helpers
  x86: avoid AREG0 for SMM helpers
  x86: avoid AREG0 for SVM helpers
  x86: avoid AREG0 for integer helpers
  x86: avoid AREG0 for condition code helpers
  x86: avoid AREG0 for FPU helpers
  linux-user: Move target_to_host_errno_table[] setup out of ioctl loop
  linux-user: Fix SNDCTL_DSP_MAP{IN, OUT}BUF ioctl definitions
  linux-user: Fix incorrect TARGET_BLKBSZGET, TARGET_BLKBSZSET

* 'linux-user.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
  linux-user: ARM: Ignore immediate value for svc in thumb mode
  linux-user: Use init_guest_space when -R and -B are specified
  linux-user: Factor out guest space probing into a function
  flatload: fix bss clearing
  linux-user: make host_to_target_cmsg support SO_TIMESTAMP cmsg_type
  linux-user: make do_setsockopt support SOL_RAW ICMP_FILTER socket option
  linux-user: pass sockaddr from host to target
  linux-user: Move target_to_host_errno_table[] setup out of ioctl loop
  linux-user: Fix SNDCTL_DSP_MAP{IN, OUT}BUF ioctl definitions
  linux-user: Fix incorrect TARGET_BLKBSZGET, TARGET_BLKBSZSET

When running in thumb mode, Linux doesn't evaluate the immediate value
of the svc instruction, but instead just always assumes the syscall number
to be in r7.

This fixes executing go_bootstrap while building go for me.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Roll the code used to initialize the guest memory space when -R
or -B is used into 'init_guest_space' and then call 'init_guest_space'
from the driver.  This way the reserved guest memory space can
be probed for.  Calling 'mmap' just once as is currently done is not
guaranteed to succeed since the host address space validation might fail.
Signed-off-by: NMeador Inge <meadori@codesourcery.com>
[PMM: Fixed minor whitespace errors.]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMeador Inge <meadori@codesourcery.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The current bss clear logic assumes the target mmap address and host
address are the same.  Use g2h to translate from the target address
space to the host so we can call memset on it.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NJing Huang <jing.huang.pku@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NJing Huang <jing.huang.pku@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NJing Huang <jing.huang.pku@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add an explicit CPUX86State parameter instead of relying on AREG0.

Remove temporary wrappers and switch to AREG0 free mode.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.

Rename remains of op_helper.c to seg_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Switch to wrapped versions of memory access functions.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Make FPU helpers take a parameter for CPUState instead
of relying on global env.

Introduce temporary wrappers for FPU load and store ops. Remove
wrappers for non-AREG0 code. Don't call unconverted helpers
directly.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* kraxel/seabios-5a02306:
  update seabios to latest master

Switch to my personal email address.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* qmp/queue/qmp: (48 commits)
  target-ppc: add implementation of query-cpu-definitions (v2)
  target-i386: add implementation of query-cpu-definitions (v2)
  qapi: add query-cpu-definitions command (v2)
  compiler: add macro for GCC weak symbols
  qapi: add query-machines command
  qapi: mark QOM commands stable
  qmp: introduce device-list-properties command
  qmp: add SUSPEND_DISK event
  qmp: qmp-events.txt: add missing doc for the SUSPEND event
  qmp: qmp-events.txt: put events in alphabetical order
  qmp: emit the WAKEUP event when the guest is put to run
  qmp: don't emit the RESET event on wakeup from S3
  scripts: qapi-commands.py: qmp-commands.h: include qdict.h
  docs: writing-qmp-commands.txt: update error section
  error, qerror: drop QDict member
  qerror: drop qerror_table and qerror_format()
  error, qerror: pass desc string to error calls
  error: drop error_get_qobject()/error_set_qobject()
  qemu-ga: switch to the new error format on the wire
  qmp: switch to the new error format on the wire
  ...

* quintela/migration-next-20120808:
  Restart optimization on stage3 update version
  Add XBZRLE statistics
  Add migration accounting for normal and duplicate pages
  Change total_time to total-time in MigrationStats
  Add migrate_set_cache_size command
  Add XBZRLE to ram_save_block and ram_save_live
  Add xbzrle_encode_buffer and xbzrle_decode_buffer functions
  Add uleb encoding/decoding functions
  Add cache handling functions
  Add XBZRLE documentation
  Add migrate-set-capabilities
  Add migration capabilities

* pmaydell/arm-devs.next:
  arm: Move some ARM devices into libhw
  ssd0323: abort() instead of exit(1) on error.
  hw/sd.c: make sd_wp_addr() return bool
  hw/sd.c: make sd_dataready() return bool
  hw/sd.c: convert binary variables to bool
  hw/sd.c: introduce wrapper for conversion address to wp group
  hw/sd.c: make sd_wp_addr() accept 64 bit address argument
  hw/sd.c: convert wp_groups in SDState to bitfield
  armv7m: Guard against no -kernel argument
  hw/armv7m_nvic: Fix incorrect default for num-irqs property

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This command attempts to map to the behavior of -cpu ?.  Unfortunately, the
output of this command differs wildly across targets.

To accommodate this, we use a weak symbol to implement a default version of the
command that fails with a QERR_NOT_SUPPORTED error code.  Targets can then
override and implement this command if it makes sense for them.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This lets us provide a default implementation of a symbol which targets can
override.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This provides the same output as -M ? but in a structured way.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

We've had a cycle to tweak.  It is time to commit to supporting them.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This can be used in conjunction with qom-list-types to determine the supported
set of devices and their parameters.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Emitted when the guest makes a request to enter S4 state.

There are three possible ways of having this event, as described here:

 http://lists.gnu.org/archive/html/qemu-devel/2012-07/msg02307.html

I've decided to add a new event and make it indepedent of SHUTDOWN.
This means that the SHUTDOWN event will eventually follow the
SUSPEND_DISK event.

I've choosen this way because of two reasons:

 1. Having an indepedent event makes it possible to query for its
    existence by using query-events

 2. In the future, we may allow the user to change what QEMU should
    do as a result of the guest entering S4. So it's a good idea to
    keep both events separated
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>