When several PCI bridges were in use, monitor command "info pci" would
enter into infinite loop. Buses behind the bridge were not discoverable
because secondary and subordinate bus numbers were not used properly.
Other buses were not found because bus search terminated on first miss.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

It's currently not used by PPC machines. Refactor so that also Sparc64
machines can use it.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

to= is handled in qemu-sockets.c inet_listen.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This one is for 0.12 too.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This provides the same information as reverted commit 2ba6edf0.  Not
much, just better than nothing.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While there, use "property" rather than "option", for consistency with
-global.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Option "-device DRIVER,?" and monitor command "device_add DRIVER,?"
print the supported properties instead of creating a device.  The
former also terminates the program.

This is commit 2ba6edf0 (just reverted) done right.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 2ba6edf0.

The commit has two issues:

* When it runs from the monitor, e.g. "device_add e1000,?", it prints
  to stderr instead of the monitor.

* Help looks to callers just like failed device creation.  This makes
  main() exit unsuccessfully on "-device e1000,?".

We need to do this differently.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 922910ce.

The commit has four issues:

* When it runs from the monitor, e.g. "device_add e1000,mac=?", it
  prints to stderr instead of the monitor.

* Help looks to callers just like failed device creation.  This makes
  main() exit unsuccessfully on "-device e1000,mac=?".

* It has an undocumented side effect on -global: "-global e1000.mac=?"
  prints help, but only when we actually add an e1000 device.

* It does not work for properties that accept the value "?".

We need to do this differently.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Help was shoehorned into device creation, qdev_device_add().  Since
help doesn't create a device, it returns NULL, which looks to callers
just like failed device creation.  Monitor handler do_device_add()
doesn't care, but main() exits unsuccessfully.

Move help out of device creation, into new qdev_device_help().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Return the bitwise inclusive or of all return values instead of the
last call's value.  This lets you find out whether any of the calls
returned a non-zero value.

No functional change, as existing users either don't care for the
value, or pass non-zero abort_on_failure, which breaks the loop on the
first non-zero return value.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 64a34bb1.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This changes the error message from "Invalid CPU index" to "Invalid
parameter index" in the human monitor.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Before, it used type 's', which strips quotes and interprets escapes,
and is quite inappropriate for QMP.

Negative arguments are no flushed to zero.  Before, they were cast to
uint32_t, which wrecked the sign.

Ridiculously large arguments including infinities are now rejected.
Before, they were interpreted as zero.  Same for NaN.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is a double value with optional suffixes ms, us, ns.  We'll need
this to get migrate_set_downtime() QMP-ready.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Before, it used type 's', which strips quotes and interprets escapes,
and is quite inappropriate for QMP.

Negative arguments are no flushed to zero.  Before, they were cast to
uint32_t, which wrecked the sign.

Ridiculously large arguments including infinities are now rejected.
Before, they were interpreted as zero.  Same for NaN.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is a double value with optional suffixes G, g, M, m, K, k.  We'll
need this to get migrate_set_speed() QMP-ready.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Helper function just like qdict_get_int(), just for QFloat/double.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Was forgotten in commit b6e098d7.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 392ecf54 introduced an accidental change
to the roms/seabios submodule.  This commit partially reverts that commit to
ensure the seabios module points to the right commit.
Reported-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

See also ee636500.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use friendly names for registers in the dumps.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

if the access check fails, the page can not be modified
and shouldn't be marked dirty.
The patch fixes the "hsfs_putpage: dirty HSFS page"
error in Solaris guests.
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Also add reset control.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This requires an updated OpenBIOS image.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

If an I/O request fails right away instead of getting an error only in the
callback, we still need to consider rerror/werror.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Current code assumes that only write requests are ever going to be restarted.
This is wrong since rerror=stop exists. Instead of directly starting writes,
use the same request processing as used for new requests.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We need a function that handles a single request. Create one by splitting out
code from virtio_blk_handle_output.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fixes CONFIG_FB_CIRRUS for Linux guests and probably much more:

When switching away from linearly mapped vram, we also have to restore
the I/O handlers for the LFB.

This regression was once introduced by commit 2bec46dc.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit enables one to use multiple virtio-serial devices and to
assign ports to arbitrary devices like this:

  -device virtio-serial,id=foo -device virtio-serial,id=bar \
  -device virtserialport,bus=foo.0,name=foo \
  -device virtserialport,bus=bar.0,name=bar
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When splitting up unaligned IO accesses, ld calls slow_ld which was
clobbering retaddr.

AFAIK the problem only shows up when running emulations with -icount
that may abort TB execution on IO accesses.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NLoïc Minier <lool@dooz.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add has() and path_of() funcs and use them across configure; has()
will test whether a command or builtin is available; path_of() will
search the PATH for executables and return the full pathname if found.

Signed-off-by: Loïc Minier <lool@dooz.org
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Check whether sdl-config is available before calling it, otherwise
./configure triggers a warning:
    ./configure: 957: sdl-config: not found

If neither the .pc file not sdl-config are present, disable SDL support.
Signed-off-by: NLoïc Minier <lool@dooz.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Function is_async_return() added by commit 940cc30d assumes
that 'data', which is returned by handlers, is always a QDict.

This is not true, as QLists can also be returned, in this case
we'll get a segfault.

Fix that by checking if 'data' is a QDict.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>