- 13 9月, 2013 2 次提交
-
-
由 Peter Maydell 提交于
The instructions CMOVcc, FCMOVcc and F[U]COMI[P] should only be present if the CMOV feature bit is set. Add missing feature bit checks so we correctly fault if emulating a 486 or 586. This fixes bug LP:1201446. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Paolo Bonzini 提交于
CR4.PAE=1 will not enable paging if CR0.PG=0, but the "if" chain in x86_cpu_get_phys_page_debug says otherwise. Check CR0.PG before everything else. Fixes "-d in_asm" for a code section at the beginning of OVMF. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NMax Filippov <jcmvbkbc@gmail.com>
-
- 12 9月, 2013 8 次提交
-
-
由 Anthony Liguori 提交于
ARM queue: * aarch64 preparation patchset (excluding the defconfigs, so this doesn't actually enable the new targets yet) * minor bugfixes and cleanups * disable "-cpu any" in system emulation mode * fix ARMv7M stack alignment on reset # gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE # gpg: Can't check signature: public key not found # By Alexander Graf (13) and others # Via Peter Maydell * pmaydell/tags/pull-target-arm-20130910: (28 commits) configure: Add handling code for AArch64 targets linux-user: Add AArch64 support linux-user: Allow targets to specify a minimum uname release linux-user: Add AArch64 termbits.h definitions linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64 linux-user: Make sure NWFPE code is 32 bit ARM only linux-user: Add signal handling for AArch64 linux-user: Fix up AArch64 syscall handlers linux-user: Add syscall number definitions for AArch64 linux-user: Add cpu loop for AArch64 linux-user: Don't treat AArch64 cpu names specially target-arm: Add AArch64 gdbstub support target-arm: Add AArch64 translation stub target-arm: Prepare translation for AArch64 code target-arm: Disable 32 bit CPUs in 64 bit linux-user builds target-arm: Add new AArch64CPUInfo base class and subclasses target-arm: Pass DisasContext* to gen_set_pc_im() target-arm: Fix target_ulong/uint32_t confusions target-arm: Export cpu_env target-arm: Extract the disas struct to a header file ... Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>
-
由 Anthony Liguori 提交于
# By Cole Robinson # Via Luiz Capitulino * luiz/queue/qmp: qapi-types.py: Fix enum struct sizes on i686 Message-id: 1378822364-13887-1-git-send-email-lcapitulino@redhat.com Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>
-
由 Anthony Liguori 提交于
# By Gerd Hoffmann (2) and Christophe Fergeau (1) # Via Gerd Hoffmann * spice/spice.v73: qxl: fix local renderer qxl: trace io port name spice-core: Use g_strdup_printf instead of snprintf Message-id: 1378807572-27902-1-git-send-email-kraxel@redhat.com Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>
-
由 Anthony Liguori 提交于
# By Gerd Hoffmann (2) and Miroslav Rezanina (2) # Via Gerd Hoffmann * kraxel/usb.89: ehci: save device pointer in EHCIState Remove dev-bluetooth.c dependency from vl.c Preparation for usb-bt-dongle conditional build usb: sanity check setup_index+setup_len in post_load Message-id: 1378806073-25197-1-git-send-email-kraxel@redhat.com Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>
-
由 Anthony Liguori 提交于
# By Tomoki Sekiyama (10) and Paul Burton (1) # Via Michael Roth * mdroth/qga-pull-2013-9-9: QMP/qemu-ga-client: Make timeout longer for guest-fsfreeze-freeze command qemu-ga: Install Windows VSS provider on `qemu-ga -s install' qemu-ga: Call Windows VSS requester in fsfreeze command handler qemu-ga: Add Windows VSS provider and requester as DLL error: Add error_set_win32 and error_setg_win32 qemu-ga: Add configure options to specify path to Windows/VSS SDK Add a script to extract VSS SDK headers on POSIX system checkpatch.pl: Check .cpp files Add c++ keywords to QAPI helper script configure: Support configuring C++ compiler mips_malta: support up to 2GiB RAM Message-id: 1378755701-2051-1-git-send-email-mdroth@linux.vnet.ibm.com Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>
-
由 Anthony Liguori 提交于
# By Anthony PERARD # Via Stefano Stabellini * sstabellini/xen-2013-09-09: pc_q35: Initialize Xen. pc: Initializing ram_memory under Xen. Message-id: alpine.DEB.2.02.1309091718030.6397@kaball.uk.xensource.com Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>
-
由 Anthony Liguori 提交于
# By Paolo Bonzini (21) and others # Via Stefan Hajnoczi * stefanha/block: (42 commits) qemu-iotests: Fixed test case 026 qemu-iotests: Whitespace cleanup dataplane: Fix startup race. block: look for zero blocks in bs->file block: add default get_block_status implementation for protocols raw-posix: report unwritten extents as zero raw-posix: return get_block_status data and flags docs, qapi: document qemu-img map qemu-img: add a "map" subcommand block: return BDRV_BLOCK_ZERO past end of backing file block: use bdrv_has_zero_init to return BDRV_BLOCK_ZERO block: return get_block_status data and flags for formats block: define get_block_status return value block: introduce bdrv_get_block_status API block: make bdrv_has_zero_init return false for copy-on-write-images qemu-img: always probe the input image for allocated sectors block: expect errors from bdrv_co_is_allocated block: remove bdrv_is_allocated_above/bdrv_co_is_allocated_above distinction block: do not use ->total_sectors in bdrv_co_is_allocated block: make bdrv_co_is_allocated static ... Message-id: 1378481953-23099-1-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>
-
由 Anthony Liguori 提交于
# By Brad Smith (2) and others # Via Stefan Hajnoczi * stefanha/net: ne2000: mark I/O as LITTLE_ENDIAN vmxnet3: Eliminate __packed redefined warning e1000: add interrupt mitigation support net: Rename send_queue to incoming_queue tap: Use numbered tap/tun devices on all *BSD OS's Message-id: 1378481624-20964-1-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>
-
- 11 9月, 2013 28 次提交
-
-
由 Alexander Graf 提交于
Add the necessary code to configure to handle AArch64 as a target CPU (we already have some code for supporting it as host). Note that this doesn't enable the AArch64 targets yet. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-23-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-12-git-send-email-john.rigby@linaro.org [PMM: * don't need to set TARGET_ABI_DIR to aarch64 as that is the default * don't build nwfpe -- this is 32 bit legacy only * rewrite commit message * add aarch64 to the list of "fdt required" targets ] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alexander Graf 提交于
This patch adds support for AArch64 in all the small corners of linux-user (primarily in image loading and startup code). Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-22-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-11-git-send-email-john.rigby@linaro.org [PMM: * removed some unnecessary #defines from syscall.h * catch attempts to use a 32 bit only cpu with aarch64-linux-user * termios stuff moved into its own patch * we specify our minimum uname version here now ] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
For newer target architectures, glibc can be picky about the kernel version: for example, it will not run on an aarch64 system unless the kernel reports itself as at least 3.8.0. Accommodate this by enhancing the existing support for faking the kernel version so that each target can optionally specify a minimum version: if the user doesn't force a specific fake version then we will override with the minimum required version only if the real host kernel version is insufficient. Use this facility to let aarch64 report a minimum of 3.8.0. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-21-git-send-email-peter.maydell@linaro.org
-
由 Alexander Graf 提交于
Add the AArch64 termbits.h with all the target's termios related constants and structures. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-20-git-send-email-peter.maydell@linaro.org [PMM: split out from another patch] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alexander Graf 提交于
Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-19-git-send-email-peter.maydell@linaro.org [PMM: pulled out from another patch; don't use is_a64() here; moved to linux-user from target-arm] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
On ARM, linux-user emulation includes NWFPE support for emulating the ancient FPA floating point coprocessor. This has long since been superseded by VFP and is only required for legacy binaries. The AArch64 linux-user target doesn't compile in NWFPE support, so make sure the relevant code is protected by suitable ifdefs. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-18-git-send-email-peter.maydell@linaro.org
-
由 Andreas Schwab 提交于
This patch adds signal handling for AArch64. The code is based on the respective source in the Linux kernel. Signed-off-by: NAndreas Schwab <schwab@suse.de> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-17-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-10-git-send-email-john.rigby@linaro.org [PMM: fixed style nits: tabs, long lines; pulled target_signal.h in from a later patch; it fits better here] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alexander Graf 提交于
Some syscall handlers have special code for ARM enabled that we don't need on AArch64. Exclude AArch64 in those cases. In other places we can share struct definitions with other targets or have to provide our own. With this patch applied, most syscall definitions in linux-user should be sound for AArch64. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-16-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-9-git-send-email-john.rigby@linaro.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alexander Graf 提交于
The AArch64 syscall definitions are all publicly available in the Linux kernel. Let's add them to our linux-user emulation target, so that we can easily handle AArch64 syscalls. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-15-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-8-git-send-email-john.rigby@linaro.org [PMM: changes relating to cpu_loop() removed as they are superseded by an earlier patch] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Add the main linux-user cpu loop for AArch64. Since AArch64 has a different system call interface, doesn't need to worry about FPA emulation and may in the future keep the prefetch/data abort information in different system registers, it's simplest just to use a completely separate loop from the 32 bit ARM target, rather than peppering it with ifdefs. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-14-git-send-email-peter.maydell@linaro.org
-
由 Alexander Graf 提交于
32-bit ARM has a lot of different names for different types of CPUs it supports. On AArch64, we don't have this, so we really don't want to execute the 32-bit logic. Stub it out for AArch64 linux-user guests. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-13-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-7-git-send-email-john.rigby@linaro.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alexander Graf 提交于
We want to be able to debug AArch64 guests. So let's add the respective gdb stub functions and xml descriptions that allow us to do so. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-12-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-6-git-send-email-john.rigby@linaro.org [PMM: dropped unused fp regs XML for now; moved 64 bit only functions to new gdbstub64.c; these are hooked up in AArch64CPU, not via ifdefs in ARMCPU] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alexander Graf 提交于
We should translate AArch64 mode separately from AArch32 mode. In AArch64 mode, registers look vastly different, instruction encoding is completely different, basically the system turns into a different machine. So let's do a simple if() in translate.c to decide whether we can handle the current code in the legacy AArch32 code or in the new AArch64 code. So far, the translation always complains about unallocated instructions. There is no emulator functionality in this patch! Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-11-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-5-git-send-email-john.rigby@linaro.org [PMM: * provide no-op versions of a64 functions ifndef TARGET_AARCH64; this lets us avoid #ifdefs in translate.c * insert the missing call to disas_a64_insn() * stash the insn in the DisasContext rather than reloading it in real_unallocated_encoding() ] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alexander Graf 提交于
This patch adds all the prerequisites for AArch64 support that didn't fit into split up patches. It extends important bits in the core cpu headers to also take AArch64 mode into account. Add new ARM_TBFLAG_AARCH64_STATE translation buffer flag indicate an ARMv8 cpu running in aarch64 mode vs aarch32 mode. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-10-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-4-git-send-email-john.rigby@linaro.org [PMM: * rearranged tbflags so AArch64? is bit 31 and if it is set then 30..0 are freely available for whatever makes most sense for that mode * added version bump since we change VFP migration state * added a comment about how VFP/Neon register state works * physical address space is 48 bits, not 64 * added ARM_FEATURE_AARCH64 flag to identify 64-bit capable CPUs ] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
If we're building aarch64-linux-user then the 32 bit CPUs are all unwanted, because they can't possibly execute the 64 bit binaries we will be running; disable them. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-9-git-send-email-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
Create a new AArch64CPU class; all 64-bit capable ARM CPUs are subclasses of this. (Currently we only support one, the "any" CPU used by linux-user.) Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-8-git-send-email-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
We want gen_set_pc_im() to work for both AArch64 and AArch32, but to do this we'll need the DisasContext* so we can tell which mode we're in, so pass it in as a parameter. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-7-git-send-email-peter.maydell@linaro.org
-
由 Alexander Graf 提交于
Correct a few places that were using uint32_t or a 32 bit only format string to handle something that should be a target_ulong. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-6-git-send-email-peter.maydell@linaro.org [PMM: split out to separate patch; added gen_goto_tb() and gen_set_pc_im() dest params to list of things to change.] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alexander Graf 提交于
The cpu_env tcg variable will be used by both the AArch32 and AArch64 handling code. Unstaticify it, so that both sides can make use of it. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-5-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-3-git-send-email-john.rigby@linaro.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alexander Graf 提交于
We will need to share the disassembly status struct between AArch32 and AArch64 modes. So put it into a header file that both sides can use. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NJohn Rigby <john.rigby@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-4-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-2-git-send-email-john.rigby@linaro.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
AArch32 code (ie traditional 32 bit world) expects to be able to pass a vaddr in a TCGv_i32. However when QEMU is compiled with TARGET_LONG_BITS=32 the TCG load/store functions take a TCGv_i64. Abstract out load/store with a 32 bit vaddr so we have a place to put the zero extension of the vaddr and the extension/truncation of the data value. Apart from the function definitions most of this patch is a simple s/tcg_gen_qemu_/gen_aa32_/. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-3-git-send-email-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
The ARM EABI specifies that 64 bit integers should be 8 aligned; remove our incorrect setting of 4 alignment. This has no actual effect since it only set the alignment for the 'abi_ullong' and 'abi_llong' types, which are used only inside code which is MIPS-specific, but it will avoid problems later if we use the types elsewhere. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Clarify a comment about the ID register value presented by the PL110 variant present on the VersatilePB board (based on testing what the actual hardware does), to indicate that this is not an error in our emulation, and to remove an #if-0. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Cole Robinson 提交于
Libvirt uses this to introspect available CPU models. Signed-off-by: NCole Robinson <crobinso@redhat.com> Reviewed-by: NAndreas Färber <afaerber@suse.de> Message-id: c0bdcd6c7ea6a085a6902ccaa73180fd771c8267.1378303555.git.crobinso@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Sebastian Ottlik 提交于
When the initial SP is loaded from the vector table on ARMv7M systems the two least significant bits are ignored as the stack is always aligned at a four byte boundary (see ARM DDI 0403C, B1.4.1 and B1.5.5). So far QEMU did not ignore these bits leading to a stack alignment inconsitent with real hardware for binaries that rely on this behaviour. This patch fixes this issue by masking the two least significant bits when loading the SP. Signed-off-by: NSebastian Ottlik <ottlik@fzi.de> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1378286595-27072-1-git-send-email-ottlik@fzi.de Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Avoid the undefined behaviour of "1 << 31" by using 1U to make the shift be of an unsigned value rather than shifting into the sign bit of a signed integer. For consistency, we make all the CPSR_* constants unsigned, though the only one which triggers undefined behaviour is CPSR_N. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net> Message-id: 1378391908-22137-3-git-send-email-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
In the decode of ARM B and BL insns, swap the order of the "append 2 implicit zeros to imm24" and the sign extend, and use the new sextract32() utility function to do the latter. This avoids a direct dependency on the undefined C behaviour of shifting into the sign bit of an integer. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net> Message-id: 1378391908-22137-2-git-send-email-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
Make the 'any' CPU for target-arm available only in linux-user mode. The ARM target provides a CPU named "any", which turns on support for all user-level instruction set extensions we know about. This is intended for linux-user emulation mode, where it is the default CPU type. It makes no sense to try to use this for system emulation, since we don't initialize it with any system-level information like feature register values or implementation specific cp15 registers. (Unsurprisingly, some boards won't boot at all, though you might get lucky in some cases where the guest doesn't happen to prod things that aren't there.) Prevent users from making this command line error by removing the CPU definition from the softmmu build. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAndreas Färber <afaerber@suse.de> Message-id: 1378213995-12945-1-git-send-email-peter.maydell@linaro.org
-
- 10 9月, 2013 2 次提交
-
-
由 Cole Robinson 提交于
Unlike other list types, enum wasn't adding any padding, which caused a mismatch between the generated struct size and GenericList struct size. More details in a678e26c This crashed qemu if calling qmp query-tpm-types for example, which upsets libvirt capabilities probing. Reproducer on i686: (sleep 5; printf '{"execute":"qmp_capabilities"}\n{"execute":"query-tpm-types"}\n') | ./i386-softmmu/qemu-system-i386 -S -nodefaults -nographic -M none -qmp stdio https://bugs.launchpad.net/qemu/+bug/1219207 Cc: qemu-stable@nongnu.org Signed-off-by: NCole Robinson <crobinso@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Tested-by: NRichard W.M. Jones <rjones@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Gerd Hoffmann 提交于
We'll need a pointer to the actual pci/sysbus device, stick a pointer to it into the EHCIState struct. https://bugzilla.redhat.com/show_bug.cgi?id=1005495Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-