- provides static SSDT object for memory hotplug that can handle
  upto 256 hotplugable memory slots
- SSDT template for memory devices and runtime generator
  of them in SSDT table.
Signed-off-by: NVasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Notify PIIX4_PM/ICH9LPC device about hotplug event,
so that it would send SCI to guest notifying about
newly added memory.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

the link will used later to access device implementing
ACPI functions instead of adhoc lookup in QOM tree.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Adds an optional subsection that allows to migrate current
state of acpi_memory_hotplug of ACPI PM device.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add memory hotplug initialization/handling to ICH9 LPC device
and enable it by default for post 2.0 machine types
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Propeties of object should be available after its instances_init()
callback is finished and not added in PCIDeviceClass.init which is
roughly corresponds to realize() method.
Moving properties adding into instances_init will fix missing
property error when global/compat property mechanism is used.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add memory hotplug initialization/handling to PIIX4_PM device
and enable it by default for post 2.0 machine types
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

MST: resolve conflict in pc.h

... and report error if plugged in device is not supported.
Later these callbacks will be used by memory hotplug.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add mhp_pc_dimm_assigned_slot & mhp_pc_dimm_assigned_address
events to trace which address and slot where assigned to
plugged in PC_DIMM device on target-i386 machine.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add events for tracing accesses to memory hotplug IO ports.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

- implements QEMU hardware part of memory hotplug protocol
  described at "docs/specs/acpi_mem_hotplug.txt"
- handles only memory add notification event for now
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

to make it more generic, so it could be used for memory hotplug
as well.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

- if slot property is not specified on -device/device_add command,
treat default value as request for assigning PCDIMMDevice to
the first free slot.

- if slot is provided with -device/device_add command, attempt to
use it or fail command if it's already occupied.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

- if 'addr' property is not specified on -device/device_add command,
treat the default value as request for assigning PCDIMMDevice to
the first free memory region.

- if 'addr' is provided with -device/device_add command, attempt to
use it or fail command if it's already occupied or falls inside
of an existing PCDIMMDevice memory region.

Note:
GCompareFunc(a, b) used by g_slist_insert_sorted() returns 'gint',
however it might be too small to fit difference between
2 addresses. So use 128bit to calculate the difference and normalize
result to -1/0/1 return values.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NAndrey Korolyov <andrey@xdel.ru>

MST: commit log tweaks

that will perform mapping of PC_DIMM device into guest's RAM address space
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

... if user attempts to start it with memory hotplug enabled.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

'etc/reserved-memory-end' will allow QEMU to tell BIOS where PCI
BARs mapping could safely start in high memory.

Allowing BIOS to start mapping 64-bit PCI BARs at address where it
wouldn't conflict with other mappings QEMU might place before it.

That permits QEMU to reserve extra address space before
64-bit PCI hole for memory hotplug.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

... which is imposed by current naming scheme of ACPI memory devices.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

initialize and map hotplug memory address space container
into guest's RAM address space.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

using the same memdev backend more than once will cause
assertion at MemoryRegion mapping time because it's already
mapped. Prevent it by checking that the associated MemoryRegion
is not mapped.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

MST: tweak commit log

which allows to check if MemoryRegion is already mapped.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Each hotplug-able memory slot is a PCDIMMDevice.
A hot-add operation for a memory device:
- creates a new PCDIMMDevice and makes hotplug controller to map it into
  guest address space

Hotplug operations are done through normal device_add commands.
For migration case, all hotplugged memory devices on source should be
specified on target's command line using '-device' option with
properties set to the same values as on source.

To simplify review, patch introduces only PCDIMMDevice QOM skeleton that
will be extended by following patches to implement actual memory hotplug
and related functions.
Signed-off-by: NVasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

so that management could detect via QOM interface if device was
hotplugged
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add get_hotplug_handler() method to machine, and
make bus-less device use it during hotplug
as a means to discover a hotplug handler controller.
The returned controller is used to perform hotplug
actions.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add following parameters:
  "slots" - total number of hotplug memory slots
  "maxmem" - maximum possible memory

"slots" and "maxmem" should go in pair and "maxmem" should be greater
than "mem" for memory hotplug to be enabled.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

MST: fix build on 32 bit

Provides framework for splitting host RAM allocation/
policies into a separate backend that could be used
by devices.

Initially only legacy RAM backend is provided, which
uses memory_region_init_ram() allocator and compatible
with every CLI option that affects memory_region_init_ram().
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

memory allocated for guest before QEMU is daemonized and then mapped
later in guest's address space after it is daemonized, leads to EPT
violation and QEMU aborts.

To avoid this and similar issues switch to daemonized mode early
before applying/processing other options.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add object to /objects before calling user_creatable_complete()
handler, so that object might be able to call
object_get_canonical_path() in its completion handler.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

replace magic numbers with enum describing Flags field of
memory affinity in SRAT table.

MemoryAffinityFlags enum will define flags decribed by:
 ACPI spec 5.0, "5.2.16.2 Memory Affinity Structure",
 "Table 5-69 Flags - Memory Affinity Structure"
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

it will be used for PC specific options/variables
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

* remotes/bonzini/memory:
  memory: Don't call memory_region_update_coalesced_range if nothing changed
  memory: MemoryRegion: rename parent to container
  memory: MemoryRegion: factor out memory region re-adder
  memory: MemoryRegion: factor out subregion add functionality
  qtest: fix qtest_clock_warp() for no deadline case
  exec: dummy_section: Pass address space through.
  memory: Simplify mr_add_subregion() if-else
  memory: Don't update all memory region when ioeventfd changed
  unset RAMBlock idstr when unregister MemoryRegion
  exec: introduce qemu_ram_unset_idstr() to unset RAMBlock idstr
  MAINTAINERS: Add myself as Memory API maintainer
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

With huge number of PCI devices in the system (for example, 200
virtio-blk-pci), this unconditional call can slow down emulation of
irrelevant PCI operations drastically, such as a BAR update on a device
that has no coalescing region. So avoid it.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Avoid confusion with the QOM parent.
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

memory_region_set_address is mostly just a function that deletes and
re-adds a memory region. Factor this generic functionality out into a
re-usable function. This prepares support for further QOMification
of MemoryRegion.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Split off the core looping code that actually adds subregions into
it's own fn. This prepares support for Memory Region qomification
where setting the MR address or parent via QOM will back onto this more
minimal function.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
[Rename new function. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

* remotes/riku/linux-user-for-upstream:
  User mode support for Linux ELF files with no section header
  linux-user: Return correct errno for unsupported netlink socket
  linux-user: Don't overrun guest buffer in sched_getaffinity
  linux-user/uname: Return correct uname string for x86_64
  linux-user: fix gcc-4.9 compiler error on __{get,put]}_user
  signal/ppc/do_setcontext remove __get_user return check
  signal/sparc64_set_context: remove __get_user checks
  signal/ppc/{save,restore}_user_regs remove __put/get error checks
  signal/all/setup_frame remove __put_user checks
  signal/all/do_sigreturn - remove __get_user checks
  signal/all/do_sigaltstack remove __get_user value check
  signal/sparc/restore_fpu_state: remove
  signal/all: remove return value from restore_sigcontext
  signal/all: remove return value from setup_sigcontext
  signal/all: remove return value from copy_siginfo_to_user
  signal/x86/setup_frame: __put_user cleanup
  signal/all: remove __get/__put_user return value reading
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use dedicated qemu_soonest_timeout() instead of MIN().
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rather than use the global singleton.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This if else is not needed. The previous call to memory_region_add
(whether _overlap or not) will always set priority and may_overlap
to desired values. And its not possible to get here without having
called memory_region_add_subregion due to the null guard on parent.
So we can just directly call memory_region_add_subregion_common.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

memory mappings don't rely on ioeventfds, there is no need
to destroy and rebuild them when manipulating ioeventfds,
otherwise it scarifies performance.

according to testing result, each ioeventfd deleing needs
about 5ms, within which memory mapping rebuilding needs
about 4ms. With many Nics and vmchannel in a VM doing migrating,
there can be many ioeventfds deleting which increasing
downtime remarkably.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NHerongguang <herongguang.he@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>