If the "id" field is missing from the options given to blockdev-add,
just omit the BlockBackend and create the BlockDriverState tree alone.

However, if "id" is missing, "node-name" must be specified; otherwise,
the BDS tree would no longer be accessible.

Many BDS options which are not parsed by bdrv_open() (like caching)
cannot be specified for these BB-less BDS trees yet. A future patch will
remove this limitation.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This flag should not be set for the root BDS only, but for any BDS that
is being created while incoming migration is pending, so setting it is
moved from blockdev_init() to bdrv_fill_options().
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It has been deprecated as of 2.3, so we can now remove it.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

qemu-ga patch queue

* unbreak qga-test unit test on travis-ci systems by not assuming a
  disk-based filesystem must be present

# gpg: Signature made Fri 23 Oct 2015 15:01:47 BST using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg:                 aka "Michael Roth <mdroth@utexas.edu>"
# gpg:                 aka "Michael Roth <mdroth@linux.vnet.ibm.com>"

* remotes/mdroth/tags/qga-pull-2015-10-23-tag:
  tests: test-qga, loosen assumptions about host filesystems
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

QGA skips pseudo-filesystems when querying filesystems via
guest-get-fsinfo. On some hosts, such as travis-ci which uses
containers with simfs filesystems, QGA might not report *any*
filesystems. Our test case assumes there would be at least one,
leading to false error messages in these situations.

Instead, sanity-check values iff we get at least one filesystem.

Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

ppc patch queue - 2015-10-23

sPAPR highlights:
  * Allow VFIO devices on the spapr-pci-host-bridge
  * Allow virtio VGA
  * Safer handling of HTAB allocation
  * ibm,pa-features device tree property

non-sPAPR highlights:
  * Categorization of many ppc specific devices in help output
  * Tweaks to MMU type constants

# gpg: Signature made Fri 23 Oct 2015 07:27:56 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-next-20151023: (21 commits)
  prep: do not use CPU_LOG_IOPORT, convert to tracepoints
  openpic: add to misc category
  macio-nvram: add to misc category
  macio: add to bridge category
  uninorth: add to bridge category
  macio-ide: add to storage category
  cuda: add to bridge category
  grackle: add to bridge category
  escc: add to input category
  cmd646: add to storage category
  adb: add to input category
  ppc/spapr: Add "ibm,pa-features" property to the device-tree
  ppc: Add mmu_model defines for arch 2.03 and 2.07
  hw/scsi/spapr_vscsi: Remove superfluous memset
  spapr_pci: Allow VFIO devices to work on the normal PCI host bridge
  spapr_iommu: Provide a function to switch a TCE table to allowing VFIO
  spapr_iommu: Rename vfio_accel parameter
  spapr_pci: Allow PCI host bridge DMA window to be configured
  spapr: Add "slb-size" property to CPU device tree nodes
  spapr: Abort when HTAB of requested size isn't allocated
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Merge qcrypto-fixes 2015/10/22

# gpg: Signature made Thu 22 Oct 2015 19:03:45 BST using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"

* remotes/berrange/tags/qcrypto-fixes-pull-20151022-2:
  configure: avoid polluting global CFLAGS with tasn1 flags
  crypto: add sanity checking of plaintext/ciphertext length
  crypto: don't let builtin aes crash if no IV is provided
  crypto: allow use of nettle/gcrypt to be selected explicitly
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vhost: build fix

Fix build breakages when using older gcc.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 22 Oct 2015 20:36:07 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vhost-user: fix up rhel6 build
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

These messages are disabled by default; a perfect usecase for tracepoints.
Convert them over.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

openpic is a programmable interrupt controller, so
add it to the misc category.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The macio nvram is a non volatile RAM, so add it
the misc category.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

macio is a bridge between the PCI bus and the Mac nvram,
IDE controller and PIC, so add it to the bridge category.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Uninorth is the mac99 PCI host controller, so add
it to the bridge category.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

macio-ide is an IDE controller, so add it
to the storage category.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Cuda is a bridge between PowerMac system bus and the ADB controller,
real-time clock, pram and the power management unit.

So add it to the bridge category.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Grackle is the PCI host controller of oldworld powermac,
so add it to the bridge category.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

ESCC is a serial port controller, so add it
to the input category.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

cmd646 is an IDE controller, so add it to the
storage category.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The Apple Desktop Bus is used to connect a keyboard and a mouse,
so add it to the input category.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

LoPAPR defines a "ibm,pa-features" per-CPU device tree property which
describes extended features of the Processor Architecture.

This adds the property to the device tree. At the moment this is the
copy of what pHyp advertises except "I=1 (cache inhibited) Large Pages"
which is enabled for TCG and disabled when running under HV KVM host
with 4K system page size.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: rebased, changed commit log, moved ci_large_pages initialization,
renamed pa_features arrays]
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This removes unused POWERPC_MMU_2_06a/POWERPC_MMU_2_06d.

This replaces POWERPC_MMU_64B with POWERPC_MMU_2_03 for POWER5+ to be
more explicit about the version of the PowerISA supported.

This defines POWERPC_MMU_2_07 and uses it for the POWER8 CPU family.
This will not have an immediate effect now but it will in the following
patch.

This should cause no behavioural change.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: rebased, changed commit log]
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

g_malloc0 already clears the memory, so no need for
the additional memset here.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The core VFIO infrastructure more or less allows VFIO devices to work
on any normal guest PCI host bridge (PHB) without extra logic.
However, the "spapr-pci-host-bridge" device (as opposed to the special
"spapr-pci-vfio-host-bridge" device) breaks this by using a partially
KVM accelerated implementation of the guest kernel IOMMU which won't
work with VFIO devices, without additional kernel support.

This patch allows VFIO devices to work on the spapr-pci-host-bridge,
by having it switch off KVM TCE acceleration when a VFIO device is
added to the PHB (either on startup, or by hotplug).
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

Because of the way non-VFIO guest IOMMU operations are KVM accelerated, not
all TCE tables (guest IOMMU contexts) can support VFIO devices.  Currently,
this is decided at creation time.

To support hotplug of VFIO devices, we need to allow a TCE table which
previously didn't allow VFIO devices to be switched so that it can.  This
patch adds an spapr_tce_set_need_vfio() function to do this, by
reallocating the table in userspace if necessary.

Currently this doesn't allow the KVM acceleration to be re-enabled if all
the VFIO devices are removed.  That's an optimization for another time.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

The vfio_accel parameter used when creating a new TCE table (guest IOMMU
context) has a confusing name.  What it really means is whether we need the
TCE table created to be able to support VFIO devices.

VFIO is relevant, because when available we use in-kernel acceleration of
the TCE table, but that may not work with VFIO devices because updates to
the table are handled in kernel, bypass qemu and so don't hit qemu's
infrastructure for keeping the VFIO host IOMMU state in sync with the guest
IOMMU state.

Rename the parameter to "need_vfio" throughout.  This is a cosmetic change,
with no impact on the logic.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

At present the PCI host bridge (PHB) for the pseries machine type has a
fixed DMA window from 0..1GB (in PCI address space) which is mapped to real
memory via the PAPR paravirtualized IOMMU.

For better support of VFIO devices, we're going to want to allow for
different configurations of the DMA window.

Eventually we'll want to allow the guest itself to reconfigure the window
via the PAPR dynamic DMA window interface, but as a preliminary this patch
allows the user to reconfigure the window with new properties on the PHB
device.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

According to a commit message in the Linux kernel (see here
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=b60c31d85a2a
for example), the name of the property that carries the information
about the number of SLB entries should be called "slb-size", and
not "ibm,slb-size". The Linux kernel can deal with both names, but
to be on the safe side we should support the official name, too.

[Now that LoPAPR is public, the relevant requirement can be found in
section C.6.1.8 --dwg]
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Terminate the guest when HTAB of requested size isn't allocated by
the host.

When memory hotplug is attempted on a guest that has booted with
less than requested HTAB size, the guest kernel will not be able
to gracefully fail the hotplug request. This patch will ensure that
we never end up in a situation where memory hotplug fails due to
less than requested HTAB size.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Allocate HTAB from ppc_spapr_init() so that we can abort the guest
if requested HTAB size is't allocated by the host. However retain the
htab reset call in spapr_reset_htab() so that HTAB gets reset (and
not allocated) during machine reset.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Build on RHEL6 fails:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42875

Apparently unnamed unions couldn't use C99  named field initializers.
Let's just name the payload union field.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The previous commit

  commit 9a2fd434
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Mon Apr 13 14:01:39 2015 +0100

    crypto: add sanity checking of TLS x509 credentials

defined new variables $TEST_LIBS and $TEST_CFLAGS and
used them in tests/Makefile to augment $LIBS and $CFLAGS.

Unfortunately this overlooks the fact that tests/Makefile
is not executed via recursive-make, it is just pulled into
the top level Makefile via an include statement. So rather
than just augmenting the compiler/linker flags for tests
it polluted the global flags.

This is thought to be behind a reported failure when
building the pixman module as a sub-module, since global
$CFLAGS are passed down to configure in pixman.

This change removes the $TEST_LIBS and $TEST_CFLAGS
replacing them with $TASN1_LIBS and $TASN1_CFLAGS,
setting only against specific objects/executables
that need them.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When encrypting/decrypting data, the plaintext/ciphertext
buffers are required to be a multiple of the cipher block
size. If this is not done, nettle will abort and gcrypt
will report an error. To get consistent behaviour add
explicit checks upfront for the buffer sizes.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If no IV is provided, then use a default IV of all-zeros
instead of crashing. This gives parity with gcrypt and
nettle backends.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the choice of whether to use nettle or gcrypt is
made based on what gnutls is linked to. There are times
when it is desirable to be able to force build against a
specific library. For example, if testing changes to QEMU's
crypto code all 3 possible backends need to be checked
regardless of what the local gnutls uses.

It is also desirable to be able to enable nettle/gcrypt
for cipher/hash algorithms, without enabling gnutls
for TLS support.

This gives two new configure flags, which allow the
following possibilities

Automatically determine nettle vs gcrypt from what
gnutls links to (recommended to minimize number of
crypto libraries linked to)

 ./configure

Automatically determine nettle vs gcrypt based on
which is installed

 ./configure --disable-gnutls

Force use of nettle

 ./configure --enable-nettle

Force use of gcrypt

 ./configure --enable-gcrypt

Force use of built-in AES & crippled-DES

 ./configure --disable-nettle --disable-gcrypt
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Collected tcg backend patches

# gpg: Signature made Wed 21 Oct 2015 22:34:28 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20151021:
  cpu-exec: Add "nochain" debug flag
  tcg/mips: Support r6 SEL{NE, EQ}Z instead of MOVN/MOVZ
  tcg/mips: Support r6 multiply/divide encodings
  tcg/mips: Support r6 JR encoding
  tcg/mips: Add use_mips32r6_instructions definition
  disas/mips: Add R6 jr/jr.hb to disassembler
  tcg-opc.h: Simplify insn_start def
  tcg/ppc: Prefer mask over andi.
  tcg/ppc: Revise goto_tb implementation
  tcg/ppc: Adjust exit_tb for change in prologue placement
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

QOM CPUState and X86CPU

* Adoption of CPUClass::disas_set_info() hook

# gpg: Signature made Thu 22 Oct 2015 17:11:24 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-cpu-for-peter:
  disas: QOMify alpha specific disas setup
  disas: QOMify mips specific disas setup
  disas: QOMify sh4 specific disas setup
  disas: QOMify lm32 specific disas setup
  disas: QOMify sparc specific disas setup
  disas: QOMify m68k specific disas setup
  disas: QOMify moxie specific disas setup
  disas: QOMify s390x specific disas setup
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Move the target_disas() alpha specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.

This also makes monitor_disas() consistent with target_disas(), as
monitor_disas() was missing a set of the BFD (This was an omission from
commit b9bec751).
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Move the target_disas() mips specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Move the target_disas() sh4 specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Move the target_disas() lm32 specifics to the CPUClass::disas_set_info()
hook and delete the #ifdef specific code in disas.c.
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NAndreas Färber <afaerber@suse.de>