- 22 11月, 2011 20 次提交
-
-
由 Gerd Hoffmann 提交于
When detaching devices from the usb hub we must wakeup too, otherwise the host misses the detach event. Commit 4a33a9ea does the same for device attach. Found by hkran@linux.vnet.ibm.com Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
qdev doesn't call the ->exit callback on ->init failures, so we have to take care ourself that we cleanup property on errors. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Use qdev_init() instead of qdev_init_nofail(), usb device initialization can fail, most common case being port and device speed mismatch. Handle failures correctly and pass up NULL pointers then. Also fixup usb_create_simple() callers (only one was buggy) to properly check for NULL pointers before referncing the usb_create_simple() return value. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Max Filippov 提交于
Add check for the EFD_NONBLOCK and EFD_CLOEXEC flags to the CONFIG_EVENTFD test. This fixes the following build failure on Fedora 9: CC event_notifier.o event_notifier.c: In function `event_notifier_init': event_notifier.c:21: error: `EFD_NONBLOCK' undeclared (first use in this function) event_notifier.c:21: error: (Each undeclared identifier is reported only once event_notifier.c:21: error: for each function it appears in.) event_notifier.c:21: error: `EFD_CLOEXEC' undeclared (first use in this function) make: *** [event_notifier.o] Error 1 Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Change the default on x86 Linux hosts to building PIE (position independent executables); instead of restricting the option to user-only targets, apply it to all targets. In addition, set the relocation sections to read-only (relro) when available; this reduces the attack surface by disallowing changes to relocation tables at runtime. While PIE reduces performance and relro increases load time, it greatly improves security, with the potential to reduce a code execution vulnerability to a self denial of service. Non-x86 are not changed, as they require TCG changes; neither are non-Linux, due to lack of test coverage. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Hongyong Zang 提交于
Ivshmem cannot work, and the command lspci cannot show ivshmem BAR2 in the guest. As for pci_register_bar(), parameter MemoryRegion should be s->bar instead of s->ivshmem. Reviewed-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NHongyong Zang <zanghongyong@huawei.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
Check pending bit only if vector mask status changed. This is not really important for qemu.git but helps fix a bug in qemu-kvm.git. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
>From: Jan Kiszka <jan.kiszka@siemens.com> Only accesses to the MSI-X table must trigger a call to msix_handle_mask_update, otherwise the vector value might be out of range. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
Only go over the table when function is masked. This is not really important for qemu.git but helps fix a bug in qemu-kvm.git. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
zlib.h is not a local include file, therefore it should be included using <> instead of "". Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
AT_REMOVEDIR is not defined on all systems. Pass the raw flags from the 9p protocol, which are always there. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
Avoid a conflict on the definition of struct file_handle by using a replacement name. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Now when you try to migrate with qed, you get: (qemu) migrate tcp:localhost:1025 Block format 'qed' used by device 'ide0-hd0' does not support feature 'live migration' (qemu) Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
We don't reopen the actual file, but instead invoke the close and open routines. We specifically ignore the backing file since it's contents are read-only and therefore immutable. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Image files have two types of data: immutable data that describes things like image size, backing files, etc. and mutable data that includes offset and reference count tables. Today, image formats aggressively cache mutable data to improve performance. In some cases, this happens before a guest even starts. When dealing with live migration, since a file is open on two machines, the caching of meta data can lead to data corruption. This patch addresses this by introducing a mechanism to invalidate any cached mutable data a block driver may have which is then used by the live migration code. NB, this still requires coherent shared storage. Addressing migration without coherent shared storage (i.e. NFS) requires additional work. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Now when you try to migrate with ivshmem, you get a proper QMP error: (qemu) migrate tcp:localhost:1025 Migration is disabled when using feature 'peer mode' in device 'ivshmem' (qemu) Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This lets different subsystems register an Error that is thrown whenever migration is attempted. This works nicely because it gracefully supports things like hotplug. Right now, if multiple errors are registered, only one of them is reported. I expect that for 1.1, we'll extend query-migrate to return all of the reasons why migration is disabled at any given point in time. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
-
由 Anthony Liguori 提交于
-
- 21 11月, 2011 7 次提交
-
-
由 Gerd Hoffmann 提交于
Commit 0c402e5a is incomplete and misses one of the two function pointer calls in usb_host_scan_dev(). Add the additional port handling logic to the other call too. Spotted by Coverity. Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Coverity thinks q could be NULL there and warns. I believe it can't be NULL there. Add assert to prove it. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Until recently all scsi commands sent to scsi-disk did either transfer data or finished instantly. The correct implementation of SYNCRONIZE_CACHE changed the picture though, and usb-storage needs a fix to handle that case correctly.
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
scsi keeps track of the tag in SCSIRequest, no need to store a separate copy. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Put status word into device state, fill it in command_complete, have usb_msd_send_status just send it out. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
usb_msd_send_status can be called from different code paths, move the debug message into the function to make sure it is printed unconditionally. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 19 11月, 2011 10 次提交
-
-
由 Blue Swirl 提交于
Fix obvious typos (decrement and off-by-one error) in pcmpestrm and pcmpistrm which resulted in infinite loop. Reported by Frank Mehnert, spotted also by Coverity (bug 84752853). Reported-by: NFrank Mehnert <frank.mehnert@oracle.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Markus Armbruster 提交于
Happily passes (size_t)-1 to rom_add_blob_fixed(), which promptly dies attempting to malloc that much. Spotted by Coverity. Bonus fix for ROMs larger than INT_MAX bytes: return ssize_t instead of int. Bug can't bite, because the only user load_aout() limits ROM size to an int value. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Fabien Chouteau 提交于
This patch replace the previous implementation with this simplified and more complete version (no shutdown when psret == 1). Signed-off-by: NFabien Chouteau <chouteau@adacore.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
cppcheck report: gdbstub.c:1781: error: Memory leak: s Rearranging of the code avoids the leak. v2: Replace the g_malloc0() by g_new0() (suggested by Stuart Brady). Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Richard Henderson 提交于
In both cases, val is computed, but then not used in the subsequent line, which then re-computes the quantity in a different type (int32_t vs unsigned long). Keep the computation type that's been working so far. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
git://repo.or.cz/qemu/agraf由 Blue Swirl 提交于
* 's390-1.0' of git://repo.or.cz/qemu/agraf: s390x: initialize virtio dev region tcg: Use TCGReg for standard tcg-target entry points. tcg: Standardize on TCGReg as the enum for hard registers s390x: Add shutdown for TCG s390-virtio machine s390: Fix cpu shutdown for KVM s390: fix short kernel command lines s390: fix reset hypercall to reset the status s390x: implement SIGP restart and shutdown s390x: implement rrbe instruction properly s390x: update R and C bits in storage key s390x: make ipte 31-bit aware s390x: add ldeb instruction
-
git://repo.or.cz/qemu/agraf由 Blue Swirl 提交于
* 'ppc-1.0' of git://repo.or.cz/qemu/agraf: pseries: Fix qdev.id handling in the VIO bus code pseries: Allow kernel's early debug output to work pseries: Default reg for vty should be SPAPR_VTY_BASE_ADDRESS pseries: Check we have a chardev in spapr_vty_init() pseries: Fix buggy spapr_vio_find_by_reg() pseries: Correct RAM size check for SLOF PPC: Fix for the gdb single step problem on an rfi instruction tcg-ppc64: Fix compile errors for userspace only builds with gcc 4.6 pseries: Fix initialization of sPAPREnvironment structure
-
由 Anthony Liguori 提交于
-
由 Anthony Liguori 提交于
-
由 Stefan Weil 提交于
The variable is assigned a value which is never used, so remove variable and assignment. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 18 11月, 2011 3 次提交
-
-
由 Michael Ellerman 提交于
When the user creates a device on the command line with -device, they can specify the id, using id=foo. Currently the VIO bus code overwrites this id with it's own value. We should only set qdev.id if it is not already set by the user. The device tree code uses qdev.id for the device tree node name, however we can't rely on the user specifiying the id using proper device tree syntax, ie. device@reg. So separate the device tree node name from the qdev.id, but use the same syntax, so they will match by default. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 David Gibson 提交于
The PAPR specification defines a virtual TTY/console interface for guest OSes to use via the H_PUT_TERM_CHAR and H_GET_TERM_CHAR hypercalls. There can be multiple virtual ttys, so these take a "termno" parameter. This encodes which vty to use as the 'reg' property on the device tree node associated with that vty. However, with the early debug options enabled, the Linux kernel will attempt debugging output through the vty very early, before it has read the device tree. In this case it always uses a termno of 0. This works on the existing PowerVM hypervisor, so we assume there must be a hack / feature in there which interprets termno==0 to mean the default primary console. To help with debugging kernels, including existing distribution kernels, this patch implements a similar feature / hack in qemu. If termno==0 is supplied to H_{GET,PUT}_TERM_CHAR, they use the first available vty device instead. We need to be careful in the case that the user has manually created an spapr-vty at address 0. So first we search for the specified reg and only if that doesn't match do we fall back. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Michael Ellerman 提交于
In commit b4a78527 ("Place pseries vty devices at addresses more similar to existing machines"), we changed the default reg for the vty to 0x30000000, however we didn't update the default value for a user specified vty device. Fix that. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-