- 13 11月, 2008 2 次提交
-
-
由 balrog 提交于
The patch in r5531 which replaced a bunch of strncpy with pstrcpy causes the x509 credentials from the -vnc parameter to be one character shorter than entered meaning that there is currently no way to enter x509 certificates... git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5707 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 balrog 提交于
After going through the debug log and scratching my head for quite some time. I found the following: The problem was with this block move: lsi_scsi: SCRIPTS dsp=0fae8e50 opcode 01000028 arg 00f63c40 lsi_scsi: DMA addr=0x00f63c40 len=36 The number of bytes to be transferred (len) should be 40 which corresponds to the block transfer of length 0x28 (from opcode 01000028). Instead we have a length of 36 (0x24). The code responsible for this is (in 'lsi_do_dma'): if (count > s->current_dma_len) count = s->current_dma_len; Basically we're overwriting the length 40 with the value 36 which I think we just left over in that variable from an earlier transfer. In my patch below I initialize s->current_dma_len to s->dbc before we begin the DMA transfer during Data In phase. The attached patch gets Openserver 5.0.5 past the hardware detection (and it lists the hard drive to boot, woohoo). It appears to stop a little while later (doesn't seem SCSI related), but it's been so long since I've booted Openserver I'm not sure what's supposted to happen after the HW detection using the boot/root disks. Props go to Craig Ringer for the initial post and the code that he posted some of which is in this patch. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5706 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 12 11月, 2008 12 次提交
-
-
由 aliguori 提交于
this patch fixes two variable initialization issues. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5705 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
This patch fixes the two following problems for Alpha linux-user: - termbits.h is incorrectly using host IOC macros and structures - IOC bitfields sizes are incorrectly set This patch corrects the ioctl TCGETS done by isatty function call on Alpha (when running SPEC crafty for instance). Signed-off-by: NLaurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5704 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Unfortunately, -linux-user doesn't use osdep as it replaces some of those functions with specific ones. The code #ifdef code in exec.c needs to remain in place so instead of introducing a qemu_getpagesize() let's just use getpagesize() in the non-Windows implementation of qemu_vmalloc. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5703 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5702 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5701 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This is pure code motion. The savevm code is all common code so we can build it once and share the object with all executables. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5700 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This will improve the build time. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5699 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Windows only flushes its cache of a CDROM if it gets a SENSE_UNIT_ATTENTION CHECK_CONDITION response to a REQUEST_SENSE command. Make sure it does so after we change the CD. Tab damage fixed by Anthony Liguori Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NSteven Smith <steven.smith@citrix.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5698 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This switches the tcp, telnet and unix socket support for character devices (serial/parallel, ...) to the new socket helpers. Thereby they gain IPv6 support and also get ability to search for a free tcp port. Syntax is the same as for vnc, using a to= option, like this: -serial tcp:localhost:5000,to=5099,server This will check the 5000 -> 5099 port range (inclusive) for a free tcp port. Likewise you can get auto-allocated unix sockets by specifying an empty path: -serial unix:,server qemu will create a randomly named socket in $TMPDIR then. tcp also got new "ipv4" and "ipv6" options to make qemu try only the specified internet protocol version. You can use the "info chardev" command added by the first patch in this series to figure the tcp port / unix socket actually allocated. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5697 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This patch switches the vnc code ofer to the new socket helper functions. It adds support IPv6 support and for automatically allocating an unused vnc display port. The latter is handled ising a to= option, specifying the upper limit for the display number to try. Scanning is started at the display number given in the display specification, i.e. this command line: -vnc localhost:7,to=11 will try displays 7 to 11 (inclusive). There are also new "ipv4" and "ipv6" options to make qemu try only the specified internet protocol version. The display actually allocated can be queried using the "info vnc" monitor command. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5696 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This patch creates a new source file qemu-sockets.c with a bunch of helper functions to create listening and connected sockets. New features of this code are (a) support for searching for a free port in a given range and (b) support for IPv6. The following patches put that code into use. Compile fixes for Windows added by Anthony Liguori Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5695 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
KVM's live migration support included support for exec: URLs, allowing system state to be written or received via an arbitrary popen()ed subprocess. This provides a convenient way to pipe state through a compression algorithm or an arbitrary network transport on its way to its destination, and a convenient way to write state to disk; libvirt's qemu driver currently uses migration to exec: targets for this latter purpose. This version of the patch refactors now-common code from migrate-tcp.c into migrate.c. Signed-off-by: NCharles Duffy <Charles_Duffy@messageone.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5694 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 11 11月, 2008 24 次提交
-
-
由 aurel32 提交于
This patch fixes the decoding of CVTST /S which was incorrectly being decoded as CVTTS. This fixes SPEC2000 gcc with 200.i input. Signed-off-by: NLaurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5693 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
(re-add commit 5689) Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5692 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5691 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5690 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5689 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Currently tap does not generate signals on I/O; this causes network latency to be dependent on the timer tick (1ms without dyntick, guest dependent with dyntick). By generating a signal on I/O, we can inform the guest immediately that a packet has arrived. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5688 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5687 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5686 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5685 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Optimize code generation in gen_compute_branch1(): - Directly use I32 variables instead of converting values from _tl to _i32 and back to _tl. - Write the result directly to bcond instead of passing by a local variable. - Temp variables are valid up to and *including* the brcond instruction. Use them instead of temp local variables. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5684 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Optimize code generation in gen_movc*(): - Temp variables are valid up to and *including* the brcond instruction. Use them instead of temp local variables. - Avoid using temporary variables to transfer values. - Access fpu_fcr31 directly in gen_movcf_ps(). Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5683 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Optimize code generation in gen_farith(): - Temp variables are valid up to and *including* the brcond instruction. Use them instead of temp local variables. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5682 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Optimize code generation in gen_muldiv(): - Don't do sign extension when the value is already guaranteed to be sign extended (otherwise, results are marked as UNPREDICTABLE). - Access the LO, HI registers directly instead of writting them through a temporary variable. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5681 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Optimize code generation in gen_arith()/gen_arith_imm(): - Don't do sign extension when the value is already guaranteed to be sign extended (otherwise, results are marked as UNPREDICTABLE). - When the value is sign extended, compare the value to 0 instead of testing bit 31/63. - Temp variables are valid up to and *including* the brcond instruction. Use them instead of temp local variables. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5680 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Bit shuffle operations can be written with very few TCG instructions (between 5 and 8), so it is worth converting them to TCG. This code also move all bit shuffle generation code to a separate function in order to have a cleaner exception code path, that is it doesn't store back the TCG register to the target register after the exception, as the TCG register doesn't exist anymore. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5679 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Bitfield operations can be written with very few TCG instructions (between 2 and 5), so it is worth converting them to TCG. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5678 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Instead of dynamically generating different code depending on the UX flag, add a new flag in ctx->flags to generate different code. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5677 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
The user mode can be tested at translation time using ctx->hflags. This simplifies gen_op_addr_add(). Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5676 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
We obviously don't need to use a temporary variable to write PC. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5675 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
This patch attempts to fix mft* helpers and the associated TCG calls. mft* helpers do not take a register in argument, however: - some helpers are called with an argument while they do not take one. - some helpers are declared with an argument they don't use. Acked-by: NThiemo Seufer <ths@networkno.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5674 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Move tcg_temp_free() out of the conditional part to make sure the TCG temporary variable is freed in all cases. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Acked-by: NThiemo Seufer <ths@networkno.de> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5673 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
On Alpha the target to native fcntl definitions were missing. Because of this, programs trying to open files with the O_CREAT option were getting O_APPEND instead, etc. This was keeping gcc from the spec benchmarks from running, among other things. (Vince Weaver) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5672 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Noticed by Chris Krumme. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5671 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
LD/STD/LWA require displacement to be multiple of 4, provide tcg_out_ldsta which checks the supplied displacement and falls back on indexed variant when the check fails. All uses of LD/STD/LWA outside of tcg_out_ldst appear to be safe. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5670 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 10 11月, 2008 2 次提交
-
-
由 aliguori 提交于
We don't need to use cpu_loop_exit() because we never use the condition codes so everything can be folded into a single case. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5669 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5668 c046a42c-6fe2-441c-8c8c-71466251a162
-