- 22 8月, 2014 2 次提交
-
-
由 Max Reitz 提交于
qemu-img amend may extensively modify the target image, depending on the options to be amended (e.g. conversion to qcow2 compat level 0.10 from 1.1 for an image with many unallocated zero clusters). Therefore it makes sense to allow the user to specify the cache mode to be used. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Many qemu-img subcommands only read the source file(s) once. For these use cases, a full write-back cache is unnecessary and mainly clutters host cache memory. Though this is generally no concern as cache memory is freely available and can be scaled by the host OS, it may become a concern with thin provisioning. For these cases, it makes sense to allow users to freely specify the source cache mode (e.g. use no cache at all). This commit adds a new switch (-T) for the qemu-img subcommands check, compare, convert and rebase to specify the cache to be used for source images (the backing file in case of rebase). Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 04 12月, 2013 1 次提交
-
-
由 Wenchao Xia 提交于
Now qemu-img convert have similar options as qemu-nbd for internal snapshot. Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 12 9月, 2013 1 次提交
-
-
由 Max Reitz 提交于
This patch adds the "amend" option to qemu-img which allows changing image options on existing image files. It also adds the generic bdrv implementation which is basically just a wrapper for the image format specific function. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 06 9月, 2013 2 次提交
-
-
由 Paolo Bonzini 提交于
This command dumps the metadata of an entire chain, in either tabular or JSON format. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Alexandre Derumier 提交于
Add a -n option to skip volume creation on qemu-img convert. This is useful for targets such as rbd / ceph, where the target volume may already exist; we cannot always rely on qemu-img convert to create the image, as dependent on the output format, there may be parameters which are not possible to specify through the qemu-img convert command line. Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NAlexandre Derumier <aderumier@odiso.com> Signed-off-by: NAlex Bligh <alex@alex.org.uk> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 23 2月, 2013 3 次提交
-
-
由 Miroslav Rezanina 提交于
This patch adds new qemu-img subcommand that compares content of two disk images. Signed-off-by: NMiroslav Rezanina <mrezanin@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Miroslav Rezanina 提交于
There can be a need to turn output to stdout off. This patch adds a -q option that enable "Quiet mode". In Quiet mode, only errors are printed out. Signed-off-by: NMiroslav Rezanina <mrezanin@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Federico Simoncelli 提交于
This option --output=[human|json] makes qemu-img check output a human or JSON representation at the choice of the user. Signed-off-by: NFederico Simoncelli <fsimonce@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 24 10月, 2012 1 次提交
-
-
由 Kashyap Chamarthy 提交于
Signed-off-by: NKashyap Chamarthy <kashyap.cv@gmail.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 12 9月, 2012 1 次提交
-
-
由 Benoît Canet 提交于
This option --output=[human|json] make qemu-img info output on human or JSON representation at the choice of the user. example: { "snapshots": [ { "vm-clock-nsec": 637102488, "name": "vm-20120821145509", "date-sec": 1345553709, "date-nsec": 220289000, "vm-clock-sec": 20, "id": "1", "vm-state-size": 96522745 }, { "vm-clock-nsec": 28210866, "name": "vm-20120821154059", "date-sec": 1345556459, "date-nsec": 171392000, "vm-clock-sec": 46, "id": "2", "vm-state-size": 101208714 } ], "virtual-size": 1073741824, "filename": "snap.qcow2", "cluster-size": 65536, "format": "qcow2", "actual-size": 985587712, "dirty-flag": false } Signed-off-by: NBenoit Canet <benoit@irqsave.net> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 15 6月, 2012 1 次提交
-
-
由 Kevin Wolf 提交于
The QED block driver already provides the functionality to not only detect inconsistencies in images, but also fix them. However, this functionality cannot be manually invoked with qemu-img, but the check happens only automatically during bdrv_open(). This adds a -r switch to qemu-img check that allows manual invocation of an image repair. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 15 12月, 2011 1 次提交
-
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 29 8月, 2011 1 次提交
-
-
由 Kevin Wolf 提交于
By default, require 4k of consecutive zero bytes for qemu-img to make the output file sparse by not issuing a write request for the zeroed parts. Add an -S option to allow users to tune this setting. This helps to avoid situations where a lot of zero sectors and data sectors are mixed and qemu-img tended to issue many tiny 512 byte writes. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 20 7月, 2011 1 次提交
-
-
由 Jes Sorensen 提交于
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 05 7月, 2011 1 次提交
-
-
由 Federico Simoncelli 提交于
qemu-img currently writes disk images using writeback and filling up the cache buffers which are then flushed by the kernel preventing other processes from accessing the storage. This is particularly bad in cluster environments where time-based algorithms might be in place and accessing the storage within certain timeouts is critical. This patch adds the option to choose a cache method when writing disk images. Signed-off-by: NFederico Simoncelli <fsimonce@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 07 4月, 2011 1 次提交
-
-
由 Jes Sorensen 提交于
This adds the basic infrastructure for supporting progress output on the command line, as well as progress support for qemu-img commands 'rebase' and 'convert'. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 22 10月, 2010 1 次提交
-
-
由 edison 提交于
In order to backup snapshots, created from QCOW2 iamge, we want to copy snapshots out of QCOW2 disk to a seperate storage. The following patch adds a new option in "qemu-img": qemu-img convert -f qcow2 -O qcow2 -s snapshot_name src_img bck_img. Right now, it only supports to copy the full snapshot, delta snapshot is on the way. Changes from V1: all the comments from Kevin are addressed: Add read-only checking Fix coding style Change the name from bdrv_snapshot_load to bdrv_snapshot_load_tmp Signed-off-by: NDisheng Su <edison@cloud.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 13 7月, 2010 1 次提交
-
-
由 Stefan Weil 提交于
Replace rebase by resize in documentation of resize command. Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 22 5月, 2010 1 次提交
-
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 03 5月, 2010 1 次提交
-
-
由 Stefan Hajnoczi 提交于
This patch adds a 'resize' command to grow/shrink disk images. This allows changing the size of disk images without copying to a new image file. Currently only raw files support resize. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 15 3月, 2010 1 次提交
-
-
由 Kevin Wolf 提交于
The option was implemented in e53dbee0, but I forgot documenting it. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 14 1月, 2010 1 次提交
-
-
由 Kevin Wolf 提交于
This adds a rebase subcommand to qemu-img which allows to change the backing file of an image. In default mode, both the current and the new backing file need to exist, and after the rebase, the COW image is guaranteed to have the same guest visible content as before. To achieve this, old and new backing file are compared and, if necessary, data is copied from the old backing file into the COW image. With -u an unsafe mode is enabled that doesn't require the backing files to exist. It merely changes the backing file reference in the COW image. This is useful for renaming or moving the backing file. The user is responsible to make sure that the new backing file has no changes compared to the old one, or corruption may occur. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 11月, 2009 1 次提交
-
-
由 Kevin Wolf 提交于
The old options are still supported for compatibility, but they are inconsistent (for example create -b vs. convert -B for backing files) and incomplete (-F only exists for create) which tends to confuse people. Remove all references to the old options from the documentation to guide users to the more consistent -o options. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 07 6月, 2009 1 次提交
-
-
由 Stuart Brady 提交于
Use hxtool to generate the 'command syntax' section of qemu-img's help message, and the corresponding section of the texinfo documentation. This has the side-effect of adding 'check' to this list of commands in the texinfo documentation. Signed-off-by: NStuart Brady <stuart.brady@gmail.com>
-