This perhaps isn't ideal in terms of (ab)using the "pc" field
to encode both pc and ppc + delay branch state, as one has to
be aware of this when examining opcode dumps.

But it preserves existing logic, which will be good for bisection,
and it certainly does save storage space.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

With an eye toward having this data replace the gen_opc_* arrays
that each target collects in order to enable restore_state_from_tb.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reduce the boilerplate required for each target.  At the same time,
move the test for breakpoint after calling tcg_gen_insn_start.

Note that arm and aarch64 do not use cpu_breakpoint_test, but still
move the inline test down after tcg_gen_insn_start.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This does tidy the icount test common to all targets.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

While we're at it, emit the opcode adjacent to where we currently
record data for search_pc.  This puts gen_io_start et al on the
"correct" side of the marker.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

With an eye toward making it mandatory.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

X86 queue, 2015-10-05

# gpg: Signature made Mon 05 Oct 2015 17:04:38 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"

* remotes/ehabkost/tags/x86-pull-request:
  icc_bus: drop the unused files
  cpu/apic: drop icc bus/bridge
  x86: use new method to correct reset sequence
  apic: move APIC's MMIO region mapping into APIC
  Correctly re-init EFER state during INIT IPI
  target-i386: add ABM to Haswell* and Broadwell* CPU models
  target-i386: get/put MSR_TSC_AUX across reset and migration
  target-i386: Make check_hw_breakpoints static
  target-i386: Move breakpoint related functions to new file
  target-i386: Convert kvm_default_*features to property/value pairs
  vl: Add another sanity check to smp_parse() function
  cpu: Introduce X86CPUTopoInfo structure for argument simplification
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Mon 05 Oct 2015 17:01:11 BST using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"

* remotes/jnsnow/tags/ide-pull-request:
  qtest/ide-test: ppc64be correction for ATAPI tests
  MAINTAINERS: Small IDE/FDC touchup
  qtest/ahci: fix redundant assertion
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vhost-user depends on vhost-net. We should probably fix that.
For now, let's disable the test otherwise.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

the 16bit ide data register is LE by definition.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Message-id: 1443461938-30039-1-git-send-email-jsnow@redhat.com

libqos/ahci and tests/fdc-test are under my purview also,
include them in the appropriate stanzas.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1443117055-29240-1-git-send-email-jsnow@redhat.com

Fixes https://bugs.launchpad.net/qemu/+bug/1497711

(!ncq || (ncq && lba48)) is the same as
(!ncq || lba48).

The intention is simply: "If a command is NCQ,
it must also be LBA48."
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1442868929-17777-1-git-send-email-jsnow@redhat.com

ICC bus impl has been droped, so all icc related files are not useful
any more; delete them.
Signed-off-by: NZhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

After CPU hotplug has been converted to BUS-less hot-plug infrastructure,
the only function ICC bus performs is to propagate reset to LAPICs. However
LAPIC could be reset by registering its reset handler after all device are
initialized.
Do so and drop ~30LOC of not needed anymore ICCBus related code.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NZhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

During reset some devices (such as hpet, rtc) might send IRQ to APIC
which changes APIC's state from default one it's supposed to have
at machine startup time.
Fix this by resetting APIC after devices have been reset to cancel
any changes that qemu_devices_reset() might have done to its state.
Signed-off-by: NZhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

When ICC bus/bridge is removed, APIC MMIO will be left
unmapped since it was mapped into system's address space
indirectly by ICC bridge.
Fix it by moving mapping into APIC code, so it would be
possible to remove ICC bus/bridge code later.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NZhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

When doing a re-initialization of a CPU core, the default state is to _not_
have 64-bit long mode enabled. This means the LME (long mode enable) and LMA
(long mode active) bits in the EFER model-specific register should be cleared.

However, the EFER state is part of the CPU environment which is
preserved by do_cpu_init(), so if EFER.LME and EFER.LMA were set at the
time an INIT IPI was received, they will remain set after the init completes.

This is contrary to what the Intel architecture manual describes and what
happens on real hardware, and it leaves the CPU in a weird state that the
guest can't clear.

To fix this, the 'efer' member of the CPUX86State structure has been moved
to an area outside the region preserved by do_cpu_init(), so that it can
be properly re-initialized by x86_cpu_reset().
Signed-off-by: NBill Paul <wpaul@windriver.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

ABM is only implemented as a single instruction set by AMD; all AMD
processors support both instructions or neither. Intel considers POPCNT
as part of SSE4.2, and LZCNT as part of BMI1, but Intel also uses AMD's
ABM flag to indicate support for both POPCNT and LZCNT.  It has to be
added to Haswell and Broadwell because Haswell, by adding LZCNT, has
completed the ABM.

Tested with "qemu-kvm -cpu Haswell-noTSX,enforce" (and also with older
machine types) on an Haswell-EP machine.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

There's one report of migration breaking due to missing MSR_TSC_AUX
save/restore.  Fix this by adding a new subsection that saves the state
of this MSR.

https://bugzilla.redhat.com/show_bug.cgi?id=1261797Reported-by: NXiaoqing Wei <xwei@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

The function is now only used from within a single file.
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Convert the kvm_default_features and kvm_default_unset_features arrays
into a simple list of property/value pairs that will be applied to
X86CPU objects when using KVM.
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

The code in smp_parse already checks the topology information for
sockets * cores * threads < cpus and bails out with an error in
that case. However, it is still possible to supply a bad configuration
the other way round, e.g. with:

 qemu-system-xxx -smp 4,sockets=1,cores=4,threads=2

QEMU then still starts the guest, with topology configuration that
is rather incomprehensible and likely not what the user wanted.
So let's add another check to refuse such wrong configurations.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

In order to simplify arguments of function, introduce a new struct
named X86CPUTopoInfo.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NZhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

virtio,pc features, fixes

New features:
    guest RAM buffer overrun mitigation
    RAM physical address gaps for memory hotplug
    (except refactoring which got some review comments)
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 02 Oct 2015 15:04:56 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vhost-user-test: fix predictable filename on tmpfs
  vhost-user-test: use tmpfs by default
  pc: memhp: force gaps between DIMM's GPA
  memhp: extend address auto assignment to support gaps
  vhost-user: unit test for new messages
  vhost-user-test: do not reinvent glib-compat.h
  virtio: Notice when the system doesn't support MSIx at all
  pc: Add a comment explaining why pc_compat_2_4() doesn't exist
  exec: allocate PROT_NONE pages on top of RAM
  oslib: allocate PROT_NONE pages on top of RAM
  oslib: rework anonimous RAM allocation
  virtio-net: correctly drop truncated packets
  virtio: introduce virtqueue_discard()
  virtio: introduce virtqueue_unmap_sg()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

First set of Linux-user que patches for 2.5

# gpg: Signature made Fri 02 Oct 2015 13:38:00 BST using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg:                 aka "Riku Voipio <riku.voipio@linaro.org>"

* remotes/riku/tags/pull-linux-user-20151002:
  linux-user: assert that target_mprotect cannot fail
  linux-user/signal.c: Use setup_rt_frame() instead of setup_frame() for target openrisc
  linux-user/syscall.c: Add EAGAIN to host_to_target_errno_table for
  linux-user: add name_to_handle_at/open_by_handle_at
  linux-user: Return target error number in do_fork()
  linux-user: fix cmsg conversion in case of multiple headers
  linux-user: remove MAX_ARG_PAGES limit
  linux-user: remove unused image_info members
  linux-user: Treat --foo options the same as -foo
  linux-user: use EXIT_SUCCESS and EXIT_FAILURE
  linux-user: Add proper error messages for bad options
  linux-user: Add -help
  linux-user: Exit 0 when -h is used
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vhost-user-test uses getpid to create a unique filename. This name is
predictable, and a security problem.  Instead, use a tmp directory
created by mkdtemp, which is a suggested best practice.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Most people don't run make check by default, so they skip vhost-user
unit tests.  Solve this by using tmpfs instead, unless hugetlbfs is
specified (using an environment variable).
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

mapping DIMMs non contiguously allows to workaround
virtio bug reported earlier:
http://lists.nongnu.org/archive/html/qemu-devel/2015-08/msg00522.html
in this case guest kernel doesn't allocate buffers
that can cross DIMM boundary keeping each buffer
local to a DIMM.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

setting gap to TRUE will make sparse DIMM
address auto allocation, leaving gaps between
a new DIMM address and preceeding existing DIMM.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Data is empty for now, but do make sure master
sets the new feature bit flag.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

glib-compat.h has the gunk to support both old-style and new-style
gthread functions.  Use it instead of reinventing it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Block layer patches

# gpg: Signature made Fri 02 Oct 2015 12:49:13 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  block/raw-posix: Open file descriptor O_RDWR to work around glibc posix_fallocate emulation issue.
  block: disable I/O limits at the beginning of bdrv_close()
  iotests: Fix test 128 for password-less sudo
  tests: Fix test 049 fallout from improved HMP error messages
  raw-win32: Fix write request error handling
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

  https://bugzilla.redhat.com/show_bug.cgi?id=1265196

The following command fails on an NFS mountpoint:

  $ qemu-img create -f qcow2 -o preallocation=falloc disk.img 262144
  Formatting 'disk.img', fmt=qcow2 size=262144 encryption=off cluster_size=65536 preallocation='falloc' lazy_refcounts=off
  qemu-img: disk.img: Could not preallocate data for the new file: Bad file descriptor

The reason turns out to be because NFS doesn't support the
posix_fallocate call.  glibc emulates it instead.  However glibc's
emulation involves using the pread(2) syscall.  The pread syscall
fails with EBADF if the file descriptor is opened without the read
open-flag (ie. open (..., O_WRONLY)).

I contacted glibc upstream about this, and their response is here:

  https://bugzilla.redhat.com/show_bug.cgi?id=1265196#c9

There are two possible fixes: Use Linux fallocate directly, or (this
fix) work around the problem in qemu by opening the file with O_RDWR
instead of O_WRONLY.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1265196Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Disabling I/O limits from a BDS also drains all pending throttled
requests, so it should be done at the beginning of bdrv_close() with
the rest of the bdrv_drain() calls before the BlockDriver is closed.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>