- 23 8月, 2013 1 次提交
-
-
由 Alex Bligh 提交于
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: NAlex Bligh <alex@alex.org.uk> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 04 7月, 2013 2 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 14 5月, 2013 1 次提交
-
-
由 Gerd Hoffmann 提交于
Otherwise the guest can crash qemu (NULL pointer dereference). https://bugzilla.redhat.com/show_bug.cgi?id=947691Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1368534544-11826-1-git-send-email-kraxel@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 4月, 2013 2 次提交
-
-
由 Paolo Bonzini 提交于
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 05 4月, 2013 5 次提交
-
-
由 Laszlo Ersek 提交于
Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1363821803-3380-8-git-send-email-lersek@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Laszlo Ersek 提交于
The new function acpi_table_install() installs any blob the caller passes in. In the next patches this function will be promoted from helper role to extern. Reimplementing the logic should make it easier to understand. It also removes a buffer overflow when has_header && cumulative_file_size < ACPI_TABLE_HDR_SIZE - ACPI_TABLE_PFX_SIZE (In that case the g_realloc() call in the read() loop used to shrink the "acpi_tables" array, causing an out-of-bounds read access when copying the header out of "acpi_tables".) The new code isn't more daring alignment-wise than its predecessor: "acpi_table_header" is packed, and the uint32_t fields are at offsets 6, 26, and 34. Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1363821803-3380-7-git-send-email-lersek@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Laszlo Ersek 提交于
As one consequence, strtok() -- which modifies its argument -- is replaced with g_strsplit(). Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1363821803-3380-6-git-send-email-lersek@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Laszlo Ersek 提交于
The upcoming changes will need a cleanup section at the end of the function, plus OptsVisitor reports errors via Error. For now keep channeling any Errors to stderr. Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1363821803-3380-4-git-send-email-lersek@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Laszlo Ersek 提交于
The data is binary, not textual. Also, acpi_table_add() abuses the "char *f" pointer -- which normally points to file names to load -- to poke into the table. Introduce "char unsigned *table_start" for that purpose. Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1363821803-3380-3-git-send-email-lersek@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 4月, 2013 1 次提交
-
-
由 Bruce Rogers 提交于
While investigating why a 32 bit Windows 2003 guest wasn't able to successfully perform a shutdown /h, it was discovered that commit afafe4bb inadvertently dropped the initialization of the s4_val used to handle s4 shutdown. Initialize the value as before. Signed-off-by: NBruce Rogers <brogers@suse.com> Message-id: 1364928100-487-1-git-send-email-brogers@suse.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 01 3月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 21 1月, 2013 1 次提交
-
-
由 Michael Tokarev 提交于
-acpitable {file|data}=file reads the content of file, but it is in binary form, so the file should be opened usin O_BINARY flag. On *nix it is a no-op, but on windows and other weird platform it is really needed. Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 19 12月, 2012 2 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 04 12月, 2012 4 次提交
-
-
由 Gerd Hoffmann 提交于
With gpe being switched to memory api this is no longer needed. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 05 10月, 2012 1 次提交
-
-
由 Jim Meyering 提交于
Adjust all uses s/strzcpy/strncpy/ and mark these uses of strncpy as "ok". Signed-off-by: NJim Meyering <meyering@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 14 8月, 2012 1 次提交
-
-
由 Luiz Capitulino 提交于
Emitted when the guest makes a request to enter S4 state. There are three possible ways of having this event, as described here: http://lists.gnu.org/archive/html/qemu-devel/2012-07/msg02307.html I've decided to add a new event and make it indepedent of SHUTDOWN. This means that the SHUTDOWN event will eventually follow the SUSPEND_DISK event. I've choosen this way because of two reasons: 1. Having an indepedent event makes it possible to query for its existence by using query-events 2. In the future, we may allow the user to change what QEMU should do as a result of the guest entering S4. So it's a good idea to keep both events separated Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 20 6月, 2012 1 次提交
-
-
由 Gleb Natapov 提交于
This patch adds two things. First it allows QEMU to distinguish between regular powerdown and S4 powerdown. Later separate QMP notification will be added for S4 powerdown. Second it allows S3/S4 states to be disabled from QEMU command line. Some guests known to be broken with regards to power management, but allow to use it anyway. Using new properties management will be able to disable S3/S4 for such guests. Supported system state are passed to a firmware using new fw_cfg file. The file contains 6 byte array. Each byte represents one system state. If byte at offset X has its MSB set it means that system state X is supported and to enter it guest should use the value from lowest 3 bits. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 25 2月, 2012 6 次提交
-
-
由 Gerd Hoffmann 提交于
Make the acpi timer wake up the guest. Guests can enable/disable this via acpi too. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Make the rtc wake up the guest when the alarm fires. Add acpi windup to property support RTC_EN, so guests can enable and disable this. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch switches pc s3 suspend over to the new infrastructure. The cmos_s3 qemu_irq is killed, the new notifier is used instead. The xen hack goes away with that too, the hypercall can simply be done in a notifier function now. This patch also makes the guest actually stay suspended instead of leaving suspend instantly, so it is useful for more than just testing whenever the suspend/resume cycle actually works. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Do APCIREGS->pm1.evt.en updates using the new acpi_pm1_evt_write_en function, so the acpi code will see those updates. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Pretty pointless, can easily be reached via ACPIREGS now. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
All those acpi structs are not independent from each other. Various acpi functions expecting multiple acpi structs passed in are a clean indicator for that ;) So this patch bundles all acpi structs in the new ACPIREGS struct, then use it everythere pass around acpi state. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 14 1月, 2012 1 次提交
-
-
由 Paolo Bonzini 提交于
All files under GPLv2 will get GPLv2+ changes starting tomorrow. event_notifier.c and exec-obsolete.h were only ever touched by Red Hat employees and can be relicensed now. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 06 12月, 2011 1 次提交
-
-
由 Dong Xu Wang 提交于
Double semicolons should be single. Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 03 9月, 2011 1 次提交
-
-
由 Stefan Weil 提交于
Most changes were made using these commands: git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/' Whitespace in linux-user/syscall_defs.h was fixed manually to avoid warnings from scripts/checkpatch.pl. Manual changes were also applied to hw/pc.c. I did not fix indentation with tabs in block/vvfat.c. The patch will show 4 errors with scripts/checkpatch.pl. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 21 8月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 30 7月, 2011 1 次提交
-
-
由 Michael Tokarev 提交于
This patch almost rewrites acpi_table_add() function (but still leaves it using old get_param_value() interface). The result is that it's now possible to specify whole table (together with a header) in an external file, instead of just data portion, with a new file= parameter, but at the same time it's still possible to specify header fields as before. Now with the checkpatch.pl formatting fixes, thanks to Stefan Hajnoczi for suggestions, with changes from Isaku Yamahata, and with my further refinements. Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru> Cc: Isaku Yamahata <yamahata@valinux.co.jp> Cc: John Baboval <john.baboval@virtualcomputer.com> Cc: Blue Swirl <blauwirbel@gmail.com> [yamahata@valinux.co.jp: fix compile error, comment fallthrough] Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 13 4月, 2011 1 次提交
-
-
由 Wen Congyang 提交于
This bug is introduced by commit 23910d3f. Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 10 4月, 2011 4 次提交
-
-
由 Isaku Yamahata 提交于
factor out ACPI GPE logic. Later it will be used by ICH9 ACPI. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Isaku Yamahata 提交于
factor out ACPI PM1_CNT logic. This will be used by ich9 acpi. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Huacai Chen <zltjiangshi@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Isaku Yamahata 提交于
factor out ACPI PM1a EVT logic. Later this will be used by ich9 acpi. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Huacai Chen <zltjiangshi@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Isaku Yamahata 提交于
factor out PM_TMR logic. Later This will be used by ich9 acpi. Also fixes the same bug in vt82c686.c that was fixed by the following commits. > commit 055479fe > Author: aliguori <aliguori@c046a42c-6fe2-441c-8c8c-71466251a162> > Date: Wed Jan 21 16:31:20 2009 +0000 > > Always return latest pmsts instead of the old one (Xiantao Zhang) > > It may lead to the issue when booting windows guests with acpi=1 > if return the old pmsts. > > Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> > Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Huacai Chen <zltjiangshi@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 09 10月, 2010 1 次提交
-
-
由 Vincent Minet 提交于
Commit d729bb9a has a typo, causing an infinite loop in acpi_table_add. Signed-off-by: NVincent Minet <vincent@vincent-minet.net> Acked-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-