Include a header to get the declaration for xml_builtin. This
avoids a warning from sparse:
  CC    m68k-softmmu/gdbstub-xml.o
gdbstub-xml.c:244:12: warning: symbol 'xml_builtin' was not declared. Should it be static?
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When using the iothread together with icount, make sure the
qemu_icount counter makes forward progress when the vcpu is
idle to avoid deadlocks.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Remove unused addition and rename to helper_carry.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Move code from the helper into the translator. The remaining
helper parts can reuse helper_addkc, making it possible to
remove helper_subkc entirely.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

* Optimize handling when carry is not updated.
* Optimize handling for adds with nop semantics.
* Move code from helper_addkc to the translator making
  helper_addkc PURE and CONST.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

No functional changes.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

No functional changes.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Call the tlb read helper (and not the write helper) for tlb
reads.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'usb.4' of git://anongit.freedesktop.org/spice/qemu: (32 commits)
  usb: zap pdev from usbport
  usb: rewrite fw path, fix numbering
  usb: add port property.
  usb: keep track of physical port address.
  usb storage: handle long responses
  usb storage: fix status reporting
  usb storage: high speed support
  usb: add device qualifier support
  usb: add usb_desc_attach
  usb: add attach callback
  usb: add speed mask to ports
  usb: hid: change serial number to "42".
  usb: hid: remote wakeup support.
  usb: hub: remote wakeup support.
  usb: uhci: remote wakeup support.
  usb: add usb_wakeup() + wakeup callback to port ops
  usb: rework attach/detach workflow
  usb: create USBPortOps, move attach there.
  usb: move remote wakeup handling to common code
  usb: move USB_REQ_{GET,SET}_CONFIGURATION handling to common code
  ...

Due to signed/unsigned comparison, the dirty bits are never reset, and
the screen redrawn each time. Fix that by only using ram_addr_t types,
and looking for page_min != addr_max instead.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Change checkpatch.pl for QEMU use:
 - Root directory detection
 - Forbid tabs
 - Indent at 4 spaces
 - Allow typedefs
 - Enforce brace use even for single statement blocks
 - Don't suggest nonexistent cleanup tools

Mention the script in CODING_STYLE.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Unchanged import from
http://www.kernel.org/pub/linux/kernel/people/apw/checkpatch/checkpatch.pl-0.31Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move build and user scripts into scripts directory.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

isa_mem_base is computed from registers during reset, but due to QEMU
limitations some devices (e.g. VGA card) need to know it earlier when
they are registered.

Workaround this by setting the value during registration instead of
reset.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The PL190 implementation keeps the default vector address
in vect_addr[16], but we weren't using this for writes to
the DEFVECTADDR register. As a result of this fix the
default_addr structure member is unused and we can delete it.
Reported-by: NHimanshu Chauhan <hschauhan@nulltrace.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Some tests in FPU emulation code were wrongly using float64_is_nan()
before commit 18569871, and wrongly
using float64_is_quiet_nan() after. Fix them by using float64_is_any_nan()
instead.
Reviewed-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The current FPU code returns 0.0 if one of the operand is a
signaling NaN and the VXSNAN exception is disabled.

fload_invalid_op_excp() doesn't return a qNaN in case of a VXSNAN
exception as the operand should be propagated instead of a new
qNaN to be generated. Fix that by calling fload_invalid_op_excp()
only for the exception generation (if enabled), and use the softfloat
code to correctly compute the result.
Reviewed-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

use qemu_malloc() instead of direct use of malloc().
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

use pci_device_deassert_intx().
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

use pci_device_deassert_intx().
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

deassert intx on device reset.
So far pci_device_reset() is used for system reset.
In that case, interrupt controller is reset at the same time so that
all irq is are deasserted.
But now pci bus reset/flr is supported, and in that case irq needs to be
disabled explicitly.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Recently PXA2xx lcd have stopped to be updated incrementally (picture
frozen). This patch fixes that by passing non min/max x/y, but rather
(correctly) x/y and w/h.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

vmstate_pxa2xx_i2c incorrectly recursed to itself instead of going
to store slave device. Fix that stop stop qemu from segfaulting
during savevm for pxa2xx-based devices.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Second instance of scoop contains registers shifted to 0x40 from the start
of the page. Instead of messing with register mapping, just limit register
address to 0x00..0x3f.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Mainstone board has two flash chips (emulated by two ram regions), however
currently code tries to allocate them with the same name, which fails.
Fix that to make mainstone emulation work again.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

I'm using the Qemu program with VNC I/O, and I had some problems with
my keyboard layout, so I've prepared a definition to be included in
Qemu, built from Xorg description.
Signed-off-by: NFrédéric Boiteux <fboiteux@free.fr>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When operating on the SCIF, process all the received characters, as long
as the FIFO can handle them.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>