Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Change the devs array into a linked list, and add a scsi_device_find
function to navigate the children list instead.  This lets the SCSI
bus use more complex addressing, and HBAs can talk to the correct device
when there are multiple LUNs per target.

scsi_device_find may return another LUN on the same target if none is
found that matches exactly.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

SCSI buses will need to read the children list first-to-last.  This
requires using a QTAILQ, because hell breaks loose if you just try
inserting at the tail (thus reversing the order of all existing
visits from last-to-first to first-to-tail).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This adds support for media change notification via the GET EVENT STATUS
NOTIFICATION command, used by Linux versions 2.6.38 and newer.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds to scsi-disk the missing mode page 0x01 for both disk
and CD-ROM drives, and mode page 0x0e for CD drives only.

A few offsets were wrong in atapi.c.  Also change the 2Ah mode page to
expose DVD media read capabilities in the IDE cdrom.  This lets you run
dvd+rw-mediainfo on the virtual DVD drives.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

A small refactoring of the MODE SENSE implementation in scsi-disk.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds a few stub implementations for MMC commands to
scsi-disk, to be filled in later in the series.  It also adds to
scsi-defs.h constants for commands implemented by ide/atapi.c,
when missing.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Building on the previous patch, this one adds a media change callback
to scsi-disk.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Reporting media change events via unit attention sense codes requires
a small state machine: first report "NO MEDIUM", then report "MEDIUM MAY
HAVE CHANGED".  Unfortunately there is no good hooking point for the
device to notice that its pending unit attention condition has been
reported.  This patch reworks the generic machinery to add one.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The first two bytes (after the 8-byte ATAPI header) are the mode page
number and the number of bytes after the length field itself.  Make
this clear in the code.

The AUDIO_CTL page was filled with wrong values.  It is not anymore in
MMC, but at least keep the values sane.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

As a complement to the previous patch, move definitions for GET EVENT
STATUS NOTIFICATION from the two functions to scsi-defs.h.

The NCR_* constants are just bit values corresponding to the ENC_*
values, with no offsets even, so keep just one copy.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The definitions in ide/internal.h are duplicates, since ATAPI commands
actually come from SCSI.  Use the ones in scsi-defs.h and move the
missing ones there.  Two exceptions:

- MODE_PAGE_WRITE_PARMS conflicts with the "flexible disk geometry"
page in scsi-disk.c.  It is unused, so pick the latter.

- GPCMD_* is left in ide/internal.h, at least for now.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Several BlockDriverState fields are not being reinitialized across
bdrv_close()/bdrv_open().  Make sure they are reset to their default
values.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Several block drivers set bs->read_only in .bdrv_open() but
block.c:bdrv_open_common() clobbers its value.  Additionally, QED uses
bdrv_is_read_only() in .bdrv_open() to decide whether to perform
consistency checks.

The correct ordering is to initialize bs->read_only from the open flags
before calling .bdrv_open().  This way block drivers can override it if
necessary and can use bdrv_is_read_only() in .bdrv_open().
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Using bdrv_close() is not enough to free a BlockDriverState.  Since we
explicitly create it with bdrv_new(), use bdrv_delete() to close and
delete it.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If qcow2_cache_flush failed, s->lock will not be unlock.
Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds a short description of how to specify a NBD device
to QEMU.
Syntax for both TCP and Unix Domain Sockets are provided as well
as examples.
Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Data we read from the disk isn't necessarily null terminated and may not
contain the string we're looking for. The code needs to be a bit more careful
here.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Return the right error values in some more places.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In error cases, cid is never set.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

tmp_filename was used outside the block it was defined in, i.e. after it went
out of scope. Move its declaration to the top level.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

An entry in the VDI block map will hold an offset to the actual block if
the block is allocated, or one of two specially-interpreted values if
not allocated. Using VirtualBox terminology, value VDI_IMAGE_BLOCK_FREE
(0xffffffff) represents a never-allocated block (semantically arbitrary
content).  VDI_IMAGE_BLOCK_ZERO (0xfffffffe) represents a "discarded"
block (semantically zero-filled).  block/vdi knows only about
VDI_IMAGE_BLOCK_FREE.  Teach it about VDI_IMAGE_BLOCK_ZERO.
Signed-off-by: NEric Sunshine <sunshine@sunshineco.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add new section for device URL syntax for special files and describe the iSCSI
URL with examples
Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This provides built-in support for iSCSI to QEMU.

This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices.
It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host.

This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at
    git://github.com/sahlberg/libiscsi.git

The patch adds the driver to interface with the iscsi library.
It also updated the configure script to
* by default, probe is libiscsi is available and if so, build
  qemu against libiscsi.
* --enable-libiscsi
  Force a build against libiscsi. If libiscsi is not available
  the build will fail.
* --disable-libiscsi
  Do not link against libiscsi, even if it is available.

When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host.

You can specify devices using a iscsi url of the form :
iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun>
When using authentication, the password can optionally be set with
LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list
Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

* 'rth/vis2' of git://repo.or.cz/qemu/rth:
  target-sparc: Implement FALIGNDATA inline.
  target-sparc: Implement BMASK/BSHUFFLE.
  target-sparc: Implement ALIGNADDR* inline.
  target-sparc: Implement EDGE* instructions.
  target-sparc: Implement fpack{16,32,fix}.
  target-sparc: Implement PDIST.
  target-sparc: Do exceptions management fully inside the helpers.
  target-sparc: Change fpr representation to doubles.
  target-sparc: Undo cpu_fpr rename.
  target-sparc: Extract float128 move to a function.
  target-sparc: Extract common code for floating-point operations.
  target-sparc: Make FPU/VIS helpers const when possible.
  target-sparc: Pass float64 parameters instead of dt0/1 temporaries.
  target-sparc: Add accessors for double-precision fpr access.
  target-sparc: Mark fprs dirty in store accessor.
  target-sparc: Add accessors for single-precision fpr access.

This is a relatively simple sequence of shifts.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

While ALIGNADDR was implemented out-of-line, ALIGNADDRL was not
implemeneted at all.  However, this is a very simple operation
so we're better off doing this inline.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>