Device models should be able to use it without an unclean include of
block_int.h.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Multiplexing callbacks complicates matters needlessly.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

So we can more easily add device model callbacks.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

For now, this just protects against programming errors like having the
same drive back multiple non-qdev devices, or untimely bdrv_delete().
Later commits will add other interesting uses.

While there, rename BlockDriverState member peer to dev, bdrv_attach()
to bdrv_attach_dev(), bdrv_detach() to bdrv_detach_dev(), and
bdrv_get_attached() to bdrv_get_attached_dev().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Account the total latency for read/write/flush requests.  This allows
management tools to average it based on a snapshot of the nr ops
counters and allow checking for SLAs or provide statistics.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Decouple the I/O accounting from bdrv_aio_readv/writev/flush and
make the hardware models call directly into the accounting helpers.

This means:
 - we do not count internal requests from image formats in addition
   to guest originating I/O
 - we do not double count I/O ops if the device model handles it
   chunk wise
 - we only account I/O once it actuall is done
 - can extent I/O accounting to synchronous or coroutine I/O easily
 - implement I/O latency tracking easily (see the next patch)

I've conveted the existing device model callers to the new model,
device models that are using synchronous I/O and weren't accounted
before haven't been updated yet.  Also scsi hasn't been converted
to the end-to-end accounting as I want to defer that after the pending
scsi layer overhaul.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch introduces bdrv_parse_cache_flags() which sets open flags
given a cache mode.  Previously this was duplicated in blockdev.c and
qemu-img.c.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add new block driver callbacks bdrv_co_readv/writev, which work on a
QEMUIOVector like bdrv_aio_*, but don't need a callback. The function may only
be called inside a coroutine, so a block driver implementing this interface can
yield instead of blocking during I/O.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

qemu-img.c wants to count allocated file size of image. Previously it
counts a single bs->file by 'stat' or Window API. As VMDK introduces
multiple file support, the operation becomes format specific with
platform specific meanwhile.

The functions are moved to block/raw-{posix,win32}.c and qemu-img.c calls
bdrv_get_allocated_file_size to count the bs. And also added VMDK code
to count his own extents.
Signed-off-by: NFam Zheng <famcool@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NDevin Nakamura <devin122@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

No users of bdrv_get_type_hint() left.  bdrv_set_type_hint() can make
the media removable by side effect.  Make that explicit.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When removing a drive from the host-side via drive_del we currently have
the following path:

drive_del
qemu_aio_flush()
bdrv_close()    // zaps bs->drv, which makes any subsequent I/O get
                // dropped.  Works as designed
drive_uninit()
bdrv_delete()   // frees the bs.  Since the device is still connected to
                // bs, any subsequent I/O is a use-after-free.

The value of bs->drv becomes unpredictable on free.  As long as it
remains null, I/O still gets dropped, however it could become non-null
at any point after the free resulting SEGVs or other QEMU state
corruption.

To resolve this issue as simply as possible, we can chose to not
actually delete the BlockDriverState pointer.  Since bdrv_close()
handles setting the drv pointer to NULL, we just need to remove the
BlockDriverState from the QLIST that is used to enumerate the block
devices.  This is currently handled within bdrv_delete, so move this
into its own function, bdrv_make_anon().

The result is that we can now invoke drive_del, this closes the file
descriptors and sets BlockDriverState->drv to NULL which prevents futher
IO to the device, and since we do not free BlockDriverState, we don't
have to worry about the copy retained in the block devices.

We also don't attempt to remove the qdev property since we are no longer
deleting the BlockDriverState on drives with associated drives.  This
also allows for removing Drives with no devices associated either.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>
Acked-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Other geometry guessing functions already reside in block.c.

Remove some unused or debugging only fields.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Certain operations such as drive_del or resize cannot be performed
while external users (eg. block migration) reference the block device.

Add a flag to indicate that.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Extend the change_cb callback with a reason argument, and use it
to tell drivers about size changes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a new bdrv_discard method to free blocks in a mapping image, and a new
drive property to set the granularity for these discard.  If no discard
granularity support is set discard support is disabled.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch re-factors img_create() moving the code doing the actual
work into block.c where it can be shared with QEMU. This is needed to
be able to create images from QEMU to be used for live snapshots.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This changes bdrv_flush to return 0 on success and -errno in case of failure.
It's a requirement for implementing proper error handle in users of bdrv_flush.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

In order to backup snapshots, created from QCOW2 iamge, we want to copy snapshots out of QCOW2 disk to a seperate storage.
The following patch adds a new option in "qemu-img": qemu-img convert -f qcow2 -O qcow2 -s snapshot_name src_img bck_img.
Right now, it only supports to copy the full snapshot, delta snapshot is on the way.

Changes from V1: all the comments from Kevin are addressed:
Add read-only checking
Fix coding style
Change the name from bdrv_snapshot_load to bdrv_snapshot_load_tmp
Signed-off-by: NDisheng Su <edison@cloud.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

BDRV_O_CACHE_MASK should have been extended when cache=unsafe introduced a new
flag BDRV_O_NO_FLUSH. There are currently no users that would change their
behaviour because of this, but let's clean it up before things break.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Block device change command did not copy BDRV_O_SNAPSHOT flag. Thus
the new image did not have this flag and the file got deleted during
opening.

Fix by copying BDRV_O_SNAPSHOT flag.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

People think that their images are corrupted when in fact there are just some
leaked clusters. Differentiating several error cases should make the messages
more comprehensible.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

BlockDriverState member removable controls whether virtual media
change (monitor commands change, eject) is allowed.  It is set when
the "type hint" is BDRV_TYPE_CDROM or BDRV_TYPE_FLOPPY.

The type hint is only set by drive_init().  It sets BDRV_TYPE_FLOPPY
for if=floppy.  It sets BDRV_TYPE_CDROM for media=cdrom and if=ide,
scsi, xen, or none.

if=ide and if=scsi work, because the type hint makes it a CD-ROM.
if=xen likewise, I think.

For the same reason, if=none works when it's used by ide-drive or
scsi-disk.  For other guest devices, there are problems:

* fdc: you can't change virtual media

    $ qemu [...] -drive if=none,id=foo,... -global isa-fdc.driveA=foo
    QEMU 0.12.50 monitor - type 'help' for more information
    (qemu) eject foo
    Device 'foo' is not removable

  unless you add media=cdrom, but that makes it readonly.

* virtio: if you add media=cdrom, you can change virtual media.  If
  you eject, the guest gets I/O errors.  If you change, the guest sees
  the drive's contents suddenly change.

* scsi-generic: if you add media=cdrom, you can change virtual media.
  I didn't test what that does to the guest or the physical device,
  but it can't be pretty.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

savevm.c keeps a pointer to the snapshot block device.  If you manage
to get that device deleted, the pointer dangles, and the next snapshot
operation will crash & burn.  Unplugging a guest device that uses it
does the trick:

    $ MALLOC_PERTURB_=234 qemu-system-x86_64 [...]
    QEMU 0.12.50 monitor - type 'help' for more information
    (qemu) info snapshots
    No available block device supports snapshots
    (qemu) drive_add auto if=none,file=tmp.qcow2
    OK
    (qemu) device_add usb-storage,id=foo,drive=none1
    (qemu) info snapshots
    Snapshot devices: none1
    Snapshot list (from none1):
    ID        TAG                 VM SIZE                DATE       VM CLOCK
    (qemu) device_del foo
    (qemu) info snapshots
    Snapshot devices:
    Segmentation fault (core dumped)

Move management of that pointer to block.c, and zap it when the device
it points becomes unusable.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo
happily creates two SCSI disks connected to the same block device.
It's all downhill from there.

Device usb-storage deliberately attaches twice to the same blockdev,
which fails with the fix in place.  Detach before the second attach
there.

Also catch attempt to delete while a guest device model is attached.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add new functions that write and flush the written data to disk immediately.
This is what needs to be used for image format metadata to maintain integrity
for cache=... modes that don't use O_DSYNC. (Actually, we only need barriers,
and therefore the functions are defined as such, but flushes is what is
implemented in this patch - we can try to change that later)
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This is a more flexible alternative to bdrv_iterate().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

do_commit() and mux_proc_byte() iterate over the list of drives
defined with drive_init().  This misses host block devices defined by
other means.  Such means don't exist now, but will be introduced later
in this series.

Change them to use new bdrv_commit_all(), which iterates over all host
block devices.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

That's where they belong semantically (block device host part), even
though the actions are actually executed by guest device code.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Both bdrv_can_snapshot() and bdrv_has_snapshot() does not work as advertized.

First issue: Their names implies different porpouses, but they do the same thing
and have exactly the same code. Maybe copied and pasted and forgotten?
bdrv_has_snapshot() is called in various places for actually checking if there
is snapshots or not.

Second issue: the way bdrv_can_snapshot() verifies if a block driver supports or
not snapshots does not catch all cases. E.g.: a raw image.

So when do_savevm() is called, first thing it does is to set a global
BlockDriverState to save the VM memory state calling get_bs_snapshots().

static BlockDriverState *get_bs_snapshots(void)
{
    BlockDriverState *bs;
    DriveInfo *dinfo;

    if (bs_snapshots)
        return bs_snapshots;
    QTAILQ_FOREACH(dinfo, &drives, next) {
        bs = dinfo->bdrv;
        if (bdrv_can_snapshot(bs))
            goto ok;
    }
    return NULL;
 ok:
    bs_snapshots = bs;
    return bs;
}

bdrv_can_snapshot() may return a BlockDriverState that does not support
snapshots and do_savevm() goes on.

Later on in do_savevm(), we find:

    QTAILQ_FOREACH(dinfo, &drives, next) {
        bs1 = dinfo->bdrv;
        if (bdrv_has_snapshot(bs1)) {
            /* Write VM state size only to the image that contains the state */
            sn->vm_state_size = (bs == bs1 ? vm_state_size : 0);
            ret = bdrv_snapshot_create(bs1, sn);
            if (ret < 0) {
                monitor_printf(mon, "Error while creating snapshot on '%s'\n",
                               bdrv_get_device_name(bs1));
            }
        }
    }

bdrv_has_snapshot(bs1) is not checking if the device does support or has
snapshots as explained above. Only in bdrv_snapshot_create() the device is
actually checked for snapshot support.

So, in cases where the first device supports snapshots, and the second does not,
the snapshot on the first will happen anyways. I believe this is not a good
behavior. It should be an all or nothing process.

This patch addresses these issues by making bdrv_can_snapshot() actually do
what it must do and enforces better tests to avoid errors in the middle of
do_savevm(). bdrv_has_snapshot() is removed and replaced by bdrv_can_snapshot()
where appropriate.

bdrv_can_snapshot() was moved from savevm.c to block.c. It makes more sense to me.

The loadvm_state() function was updated too to enforce that when loading a VM at
least all writable devices must support snapshots too.
Signed-off-by: NMiguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch calls the close handler of the block driver before the qemu
process exits.

This is necessary because the sheepdog block driver releases the lock
of VM images in the close handler.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

C defaults to int, so make definition of BDRV_SECTOR_SIZE 64 bit
safe as it and BDRV_SECTOR_MASK may be used against 64 bit addresses.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch enables protocol drivers to use their create options which
are not supported by the format.  For example, protcol drivers can use
a backing_file option with raw format.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Usually the guest can tell the host to flush data to disk. In some cases we
don't want to flush though, but try to keep everything in cache.

So let's add a new cache value to -drive that allows us to set the cache
policy to most aggressive, disabling flushes. We call this mode "unsafe",
as guest data is not guaranteed to survive host crashes anymore.

This patch also adds a noop function for aio, so we can do nothing in AIO
fashion.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This fixes the problem that qemu-img's use of no_zero_init only considered the
no_zero_init flag of the format driver, but not of the underlying protocols.

Between the raw/file split and this fix, converting to host devices is broken.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We're running into various problems because the "raw" file access, which
is used internally by the various image formats is entangled with the
"raw" image format, which maps the VM view 1:1 to a file system.

This patch renames the raw file backends to the file protocol which
is treated like other protocols (e.g. nbd and http) and adds a new
"raw" image format which is just a wrapper around calls to the underlying
protocol.

The patch is surprisingly simple, besides changing the probing logical
in block.c to only look for image formats when using bdrv_open and
renaming of the old raw protocols to file there's almost nothing in there.

For creating images, a new bdrv_create_file is introduced which guesses the
protocol to use. This allows using qemu-img create -f raw (or just using the
default) for both files and host devices. Converting the other format drivers
to use this function to create their images is left for later patches.

The only issues still open are in the handling of the host devices.
Firstly in current qemu we can specifiy the host* format names
on various command line acceping images, but the new code can't
do that without adding some translation.  Second the layering breaks
the no_zero_init flag in the BlockDriver used by qemu-img.  I'm not
happy how this is done per-driver instead of per-state so I'll
prepare a separate patch to clean this up.

There's some more cleanup opportunity after this patch, e.g. using
separate lists and registration functions for image formats vs
protocols and maybe even host drivers, but this can be done at a
later stage.

Also there's a check for protocol in bdrv_open for the BDRV_O_SNAPSHOT
case that I don't quite understand, but which I fear won't work as
expected - possibly even before this patch.

Note that this patch requires various recent block patches from Kevin
and me, which should all be in his block queue.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The bdrv_create2 implementation has disappeared long ago. Remove its
prototype from the header file, too.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

BDRV_O_FILE is only used to communicate between bdrv_file_open and bdrv_open.
It affects two things:  first bdrv_open only searches for protocols using
find_protocol instead of all image formats and host drivers.  We can easily
move that to the caller and pass the found driver to bdrv_open.  Second
it is used to not force a read-write open of a snapshot file.  But we never
use bdrv_file_open to open snapshots and this behaviour doesn't make sense
to start with.

qemu-io abused the BDRV_O_FILE for it's growable option, switch it to
using bdrv_file_open to make sure we only open files as growable were
we can actually support that.

This patch requires Kevin's "[PATCH] Replace calls of old bdrv_open" to
be applied first.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>