Add emulation of KPAS register and proper emulation of
KPASMKP regs, so now driver supports multipresses and properly
works with Linux driver.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NDavid 'Digit' Turner <digit@google.com>
Acked-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This warning is reported by cppcheck:

check-qdict.c:270: warning: scanf without field width limits can crash with huge input data

Fix it by limiting the field widths to 127 (both key and value take
127 characters + a terminating '\0' byte).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Although both leaks are not really important, fix them
to avoid cppcheck warnings:

tests/linux-test.c:433: error: Memory leak: stack1
tests/linux-test.c:433: error: Memory leak: stack2
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Check if the backend option is missing before searching the backend
table.  This fixes a NULL pointer dereference when QEMU is invoked with
the following invalid command-line:

  $ qemu -chardev id=foo,path=/tmp/socket

Previously QEMU would segfault, now it produces this error message:

  chardev: "foo" missing backend
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Acked-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

qemu makes it possible to disable link at tap which is not communicated
to the guest but causes all packets to be dropped.

When vhost-net is enabled, vhost needs to be aware of both the virtio
link_down and the peer link_down. we switch to userspace emulation when
either is down.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reported-by: Npradeep <psuriset@linux.vnet.ibm.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

qemu makes it possible to disable link at tap which is not communicated
to the guest but causes all packets to be dropped.

This works for virtio userspace, as qemu stops giving it packets, but
not for virtio-net connected to vhost-net as that does not get notified
about this change.

Notify peer when this happens, which will then be used by the follow-up
patch to stop/start vhost-net.

Note: it might be a good idea to make peer link status match tap in this
case, so the guest gets an event and updates the carrier state. For now
stay bug for bug compatible with what we used to have in userspace.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reported-by: Npradeep <psuriset@linux.vnet.ibm.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

These functions take arguments of type PDWORD_PTR which is a
pointer to a DWORD_PTR, not a pointer to a DWORD.

Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Correctly handle VQRSHL of unsigned values by a shift count of the
width of the data type or larger, which must be special-cased in the
qrshl_u* helper functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Handle the case of signed VQRSHL by a shift count of the width of the
data type or larger, which must be special cased in the qrshl_s*
helper functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix decoding of 64 bits variants of VSHRN, VRSHRN, VQSHRN, VQSHRUN,
VQRSHRN, VQRSHRUN, taking into account whether inputs are unsigned
or not.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Call the normal shift helpers instead of the rounding ones.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix value returned by signed 8 and 16 bit qrshl helpers
when the result has saturated.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix range of shift amounts which always give 0 as result.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix handling of unsigned VRSHL.s8 and .s16 right shifts by the type
width.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Correctly handle VRSHL of signed values by a shift count of the
width of the data type or larger, which must be special-cased in the
rshl_s* helper functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Handle cases where adding the rounding constant could overflow in Neon
shift instructions: VRSHR, VRSRA, VQRSHRN, VQRSHRUN, VRSHRN.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
[peter.maydell@linaro.org: fix handling of large shifts in rshl_s32,
calculate signed saturated value as other functions do.]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Move the implementation of the Neon VUZP unzip instruction from inline
code to helper functions. (At 50+ TCG ops it was well over the
recommended limit for coding inline.) The helper implementations also
give the correct answers where the inline implementation did not.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Move the implementation of the Neon VUZP unzip instruction from inline
code to helper functions. (At 50+ TCG ops it was well over the
recommended limit for coding inline.) The helper implementations also
fix the handling of the quadword version of the instruction.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We handle Thumb Neon data processing instructions by converting them
into the equivalent ARM encoding, as the two are very close. However
the ARM encoding should have bit 28 set, not clear. This wasn't causing
any problems because we don't actually look at that bit during decode;
however it is better to do the conversion correctly to avoid problems
later if we add checks to UNDEF on SBZ/SBO bits.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

For VQDMLSL, negation has to occur after saturation, not before.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Refactor the handling of VQDMULL so that it is dealt with in
its own if() case rather than together with the accumulating
instructions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Implement VMULL.P8 (the 32x32->64 version of the polynomial multiply
instruction).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Since configure guarantees us that we have pthreads on all hosts
except mingw (which doesn't support a USER_ONLY config), we can
and should use the pthread_mutex based implementation of spin_lock()
and spin_unlock() in all USER_ONLY cases. This means that all the
inline-native-assembly code supporting the "USER_ONLY but not USE_NPTL"
case can go away.

The not-USER_ONLY case remains as empty implementations; there is
no change in behaviour here.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The spec says: Any descriptor with a non-zero status byte has been
processed by the hardware, and is ready to be handled by the software.

Thus, once we change a descriptor status to non-zero we should
never move the head backwards and try to reuse this
descriptor from hardware.

This actually happened with a multibuffer packet
that arrives when we don't have enough buffers.

Fix by checking that we have enough buffers upfront
so we never need to discard the packet midway through.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The e1000 spec says: if software statically allocates
buffers, and uses memory read to check for completed descriptors, it
simply has to zero the status byte in the descriptor to make it ready
for reuse by hardware. This is not a hardware requirement (moving the
hardware tail pointer is), but is necessary for performing an in–memory
scan.

Thus the guest does not have to clear the status byte.  In case it
doesn't we need to clear EOP for all descriptors
except the last.  While I don't know of any such guests,
it's probably a good idea to stick to the spec.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reported-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

e1000 supports multi-buffer packets larger than rxbuf_size.

This fixes the following (on linux):
- in guest: ifconfig eth1 mtu 16110
- in host: ifconfig tap0 mtu 16110
           ping -s 16082 <guest-ip>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Both i386 and x86_64 targets are now using target_phys_bits=64. Remove
useless code.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

qemu i386 used to support more than 4GB of RAM through PAE, but it has
been disabled for an unknown reason. Reenable it.

Note that simply running qemu x86_64 and emulating a 32-bit CPU is not
a solution to this problem as it is about 15% slower (it needs to
emulate 64 bit registers even if half of them are not used). On the
other hand, I haven't seen any measurable impact by switching
target_phys_bits to 64.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

* 'linux-user-for-upstream' of git://gitorious.org/qemu-maemo/qemu:
  linux-user: correct core dump format
  linux-user: Define target alignment size
  linux-user: Support the epoll syscalls
  linux-user: in linux-user/strace.c, tswap() is useless
  linux-user: add rmdir() strace

Convert to qdev. Don't expose PITState.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Ignore failure with vga-isa device creation, but print a warning
message.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Based on patch by David Ahern.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Ignore failure with fdc device creation.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Turn fdc_init_isa into an inline function.

Get floppy geometry directly from the drives.

Don't expose FDCtrl.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>