- 11 1月, 2010 10 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Right now lsi_request is allocated when a request is queued and released when a request is unqueued. With this patch applied the lsi_request is kept for the whole lifetime of the scsi request. Rationale: We can use it for per-request data then. The patch does that already for the request tag. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Replace the funky array logic for queued commands with standard qemu list functions. Also rename lsi_queue to lsi_request. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Roland Dreier 提交于
Check that the cursor dimensions passed from the guest for the DEFINE_CURSOR command don't overflow the available space in the cursor.image[] or cursor.mask[] arrays before copying data from the guest into those arrays. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gleb Natapov 提交于
Without this qemu can even start on kvm modules with events support since default value of exception_injected in zero and this is #DE exception. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jiri Denemark 提交于
Late initialization of CPU topology in CPUState prevents KVM guests to actually see the topology. Signed-off-by: NJiri Denemark <jdenemar@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Huang Ying 提交于
Now, if we inject a fatal MCE into guest OS, for example Linux, Linux will go panic and then reboot. But if we inject another MCE now, system will reset directly instead of go panic firstly, because MCG_STATUS.MCIP is set to 1 and not cleared after reboot. This is does not follow the behavior in real hardware. This patch fixes this via set env->mcg_status to 0 during system reset. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Blue Swirl 提交于
Fixes build with PCI_DEBUG defined. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 10 1月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Avoid a ROM conflict. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 09 1月, 2010 13 次提交
-
-
由 malc 提交于
Previous patch introduced subtle regression, in cases when OSS_GETVERSION fails the code wasn't falling back to SNDCTL_DSP_SETFRAGMENT. Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Paolo Bonzini 提交于
This adds a few more vpath suffixes and points the remaining two paths explicitly to $(SRC_PATH) in order to eliminate the VPATH assignment from config-host.mak. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 malc 提交于
This fixes a problem with a previous patch spotted by Juergen Lock, thanks to him again. Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Blue Swirl 提交于
libuser.a was removed by 0e8c9214. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor V. Kovalenko 提交于
cpu_check_irqs - handle SOFTINT register TICK and STICK timer bits - only check interrupt levels greater than PIL value - handle preemption by higher level traps cpu_exec - handle CPU_INTERRUPT_HARD only if interrupts are enabled - PIL 15 is not special level on sparcv9 Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor V. Kovalenko 提交于
- to be used by cpu_check_irqs Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor V. Kovalenko 提交于
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor V. Kovalenko 提交于
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor V. Kovalenko 提交于
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor V. Kovalenko 提交于
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor V. Kovalenko 提交于
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor V. Kovalenko 提交于
- pstate is 32bit variable, no need to pass 64bit value around Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 08 1月, 2010 12 次提交
-
-
由 Adam Lackorzynski 提交于
Move multiboot loading code into separate files as suggested by Alex Graf. Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Adam Lackorzynski 提交于
Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
The gdt address calculation in linuxboot.bin is broken in two ways: first it loads %cs into %eax, but that instruction leaves the high bits of %eax undefined and we did not clear them. Secondly, we completely ignore the incorrect %eax, and use the undefined %ebx instead. With these issues fixed, linuxboot works again. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Some commands return a QList of QDicts, which is valid, but will trig the assert(). Just drop it. Reported-by: NNathan Baum <nathan@parenthephobia.org.uk> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 François Revol 提交于
The disk image I created from my old laptop disk with VBoxManage internalcommand converthd obviously was not a multiple of 1MB as when created from scratch. This fixes QEMU refusing it. We still require the size to be a multiple of sector size though. It then boots correctly. Allow opening VDI images with size not multiple of 1MB (as when converted from a raw disk). Signed-off-by: NFrançois Revol <revol@free.fr> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
When vhost is bound to a backend device, we need to stop polling it when vhost is started, and restart polling when vhost is stopped. Add an API for that for use by vhost, and implement in tap backend. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 H. Peter Anvin 提交于
Add generic support for debugging consoles (simple I/O ports which when written to cause debugging output to be written to a target.) The current implementation matches Bochs' port 0xe9, allowing the same debugging code to be used for both Bochs and Qemu. There is no vm state associated with the debugging port, simply because it has none -- the entire interface is a single, stateless, write-only port. Most of the code was cribbed from the serial port driver. v2: removed non-ISA variants (they can be introduced when/if someone wants them, using code from the serial port); added configurable readback (Bochs returns 0xe9 on a read from this register, mimic that by default) This retains the apparently somewhat controversial user friendly option, however. v3: reimplemented the user friendly option as a synthetic option ("-debugcon foo" basically ends up being a parser-level shorthand for "-chardev stdio,id=debugcon -device isa-debugcon,chardev=debugcon") -- this dramatically reduced the complexity while keeping the same level of user friendliness. v4: spaces, not tabs. v5: update to match current top of tree. Calling qemu_chr_open() already during parsing no longer works; defer until we are parsing the other console-like devices. Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
This makes rebuilds after source updates easier for most users (who don't edit config-devices.mak). Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
The vpath directive has two advantages over the VPATH variable: 1) it allows to skip searching of .o files; 2) the default semantics are to append to the vpath, so there is no confusion between "VPATH=xyz" and "VPATH+=xyz". Since "vpath %.c %.h PATH" is not valid, I'm introducing a wrapper macro to append one or more directories to the vpath. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 malc 提交于
Thanks to Juergen Lock. Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Blue Swirl 提交于
See also 821b19fe. Spotted by Artyom Tarasenko and Igor Kovalenko. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Andreas Färber 提交于
Juan has contributed a cool Makefile infrastructure that enables us to drop static libraries completely: Move shared obj-y definitions to Makefile.objs, prefixed {common-,hw-,user-}, and link those object files directly into the executables. Replace HWLIB by HWDIR, specifying only the directory. Drop --whole-archive and ARLIBS in Makefiles and configure. Drop GENERATED_HEADERS dependency in rules.mak, since this rebuilds all common objects after generating a target-specific header; add dependency rules to Makefile and Makefile.target instead. v2: - Don't try to include /config.mak for user emulators - Changes to user object paths ("Quickfix for libuser.a drop") were obsoleted by "user_only: compile everything with -fpie" (Kirill A. Shutemov) v3: - Fix dependency modelling for tools - Remove comment on GENERATED_HEADERS obsoleted by this patch Signed-off-by: NAndreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Palle Lyckegaard <palle@lyckegaard.dk> Cc: Ben Taylor <bentaylor.solx86@gmail.com> Cc: Juan Quintela <quintela@trasno.org> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 07 1月, 2010 4 次提交
-
-
由 Anthony Liguori 提交于
02c2b87f introduced a regression whereas the foreground color in a hextile update was not being properly invalidated leading to artifacts. It's still necessary to explicitly invalidate the foreground color with a SubrectColoured tile even though we no longer send a foreground color as part of the tile. Reported-by: NMark Cave-Ayland <mark.cave-ayland@siriusit.co.uk> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Default is NO. Signed-off-by: NAndreas Färber <andreas.faerber@web.de> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Andreas Färber 提交于
Disable the nice resize animation, to avoid drawing glitches following a guest's screen size change. Based on patch by Juha Riihimäki. Signed-off-by: NAndreas Färber <andreas.faerber@web.de> Cc: Juha Riihimäki <juha.riihimaki@nokia.com> Cc: Alexander Graf <alex@csgraf.de> Cc: Mike Kronenberg <mike.kronenberg@kronenberg.org> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Andreas Färber 提交于
The application is not very useful once the guest window is closed. QEMU is not a document-based application; terminating it automatically saves the user another action and resembles SDL behavior. v2: - Use delegate method, suggested by Juha Riihimäki. Signed-off-by: NAndreas Färber <andreas.faerber@web.de> Cc: Juha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-