This introduces new test reporting infrastructure based on
gtester and gtester-report.

Also, all existing tests are moved to tests/, and tests/Makefile
is reorganized to factor out the commonalities in the rules.
Signed-off-by: NAnthony Liguori <aliguori@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* origin/master:
  qemu tcg: Remove one entry of INDEX_op_ld_i64 from ppc_op_defs

There two entries of INDEX_op_ld_i64 in the ppc_op_defs.  That causes an
assertion failure in tcg_add_target_add_op_defs() when --enable-debug is
used on a ppc64 backend (that's ppc64 host, not target).
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nmalc <av1474@comtv.ru>

* sstabellini/disk_io:
  xen_disk: when using AIO flush after the operation is completed
  xen_disk: open disk with BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_NATIVE_AIO

* sstabellini/xen-fixes:
  xen_disk: detach the blkdev before bdrv_delete
  xen_console: ignore console disconnect events from console/0

* qmp/queue/qmp:
  qmp: document strict parsing
  qmp: parse commands in strict mode
  qmp: add and use q type specifier
  qapi: add strict mode to input visitor
  qapi: place outermost object on qiv stack
  qapi: untangle next_list
  qapi: allow freeing partially-allocated objects
  qapi: shortcut visits on errors
  qapi: fix memory leak on error
  qapi: fail hard on stack imbalance
  qapi: add a test case for type errors
  qapi: add struct-errors test case to test-qmp-output-visitor
  qapi: fix double free in qmp_output_visitor_cleanup()

* alon/libcacard:
  libcacard/vcard_emul_nss: add warning for old coolkey
  libcacard/vcard_emul_nss: handle no readers at startup
  libcacard/vcard_emul_nss: don't stop thread when there are no slots

Mask incoming page address early so that resolved addresses
are page aligned. Remove further address masking.
Tested-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

We need to detach the blkdev from the BlockDriverState before calling
bdrv_delete.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

The first console has a different location compared to other PV devices
(console, rather than device/console/0) and doesn't obey the xenstore
state protocol. We already special case the first console in con_init
and con_initialise, we should also do it in con_disconnect.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

"O" is being used by the transaction and qom-set commands to mean "any
QObject", but it really means "do not validate the argument list".
Add a new specifier with the correct meaning.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

While QMP in general is designed so that it is possible to ignore
unknown arguments, in the case of the QMP server it is better to
reject them to detect bad clients.  In fact, we're already doing
this at the top level in the argument checker.  To extend this to
complex structures, add a mode to the input visitor where it checks
for unvisited keys and raises an error if it finds one.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This is a slight change in the implementation of QMPInputVisitor
that helps when adding strict mode.

Const QObjects cannot be inc/decref-ed, and that's why QMPInputVisitor
relies heavily on weak references to inner objects.  I'm not removing
the weak references now, but since refcount+const is a lost battle in C
(C++ has "mutable") I think removing const is fine in this case.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Right now, the semantics of next_list are complicated.  The caller must:

* call start_list

* call next_list for each element *including the first*

* on the first call to next_list, the second argument should point to
NULL and the result is the head of the list.  On subsequent calls,
the second argument should point to the last node (last result of
next_list) and next_list itself tacks the element at the tail of the
list.

This works for both input and output visitor, but having the visitor
write memory when it is only reading the list is ugly.  Plus, relying
on *list to detect the first call is tricky and undocumented.

We can initialize so->entry in next_list instead of start_list, leaving
it NULL in start_list.  This way next_list sees clearly whether it is
on the first call---as a bonus, it discriminates the cases based on
internal state of the visitor rather than external state.  We can
also pull the assignment of the list head from generated code up to
next_list.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Objects going through the dealloc visitor can be only partially allocated.
Detect the situation and avoid a segfault.  This also helps with the
input visitor, when there are errors.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

We can exit very soon if we enter a visitor with a preexisting error.
This simplifies some cases because we will not have to deal with
obj being non-NULL while *obj is NULL.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

QmpInputVisitor would leak the malloced struct if the stack was
overflowed.  This can be easily fixed using error_propagate.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

QmpOutputVisitor will segfault if an imbalanced end function is
called.  So we can abort in QmpInputVisitor too.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

There is no test case for parse errors, add one.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This test case verifies that invalid native enums are caught, and causes
qapi to tear down the QObject tree under construction, exercising the
previous patch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Stack entries in QmpOutputVisitor are navigation links (weak references),
except the bottom (ie. least recently added) entry, which owns the root
QObject [1]. Make qmp_output_visitor_cleanup() drop the stack entries,
then release the QObject tree by the root.

Attempting to serialize an invalid enum inside a dictionary is an example
for triggering the double free.

[1] http://lists.nongnu.org/archive/html/qemu-devel/2012-03/msg03276.htmlSigned-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

* mdroth/qga-pull-3-26-12:
  qemu-ga: fix bsd build, and re-org linux-specific implementations

* stefanha/trivial-patches:
  trace-events: Fix broken build caused by wrong format specifier
  test: add test-qmp-commands to make check
  qapi: remove print statements from test-qmp-commands
  test: remove qemu-ga reference
  vl.c: fix '-cpu ?' segfault

* spice/spice.v51:
  ui/spice-display: use uintptr_t when casting qxl physical addresses
  ui/spice-display.c: Fix compilation warnings on 32 bit hosts

This was added by mistake a while back.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There's only TODO information in qemu man page for -global option. This is a basic description of this option with simple example.
Signed-off-by: NMiroslav Rezanina <mrezanin@redhat.com>

v4:
 - break long line

v3:
 - add use case description
 - use prop instead of property

v2:
 - Use better value in example
Patch:
--
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NFederico Simoncelli <fsimonce@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Older coolkey versions (before the future fix of RHBZ 802435) have
a fake card reader created if no reader is detected during module
initialization. Warn libcacard users if the faulty coolkey is detected
by checking for the fake reader name "E-Gate 0 0".
Signed-off-by: NAlon Levy <alevy@redhat.com>

When starting with no readers, coolkey should show no slots (with
RHBZ 806038 fixed). Fix initialization to launch the event handling
thread for each module that isn't the internal module regardless of the
number of slots detected for it at initialization time, since slot
number may start as 0 and is dynamic.

RHBZ: 802435
Signed-off-by: NAlon Levy <alevy@redhat.com>

Signed-off-by: NAlon Levy <alevy@redhat.com>

mem is an uint64_t value, so %lx was wrong.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

All the deps are here but the test was never added to the list of tests
for make check
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This is necessary for nicer make check integration.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This was added by mistake a while back.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Fix stupid copy&paste mistake at commit
ecf40bea: I moved code around but kept
"optarg" on the cpu_list() call.
Reported-by: NJiri Denemark <jdenemar@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>