- 20 2月, 2010 15 次提交
-
-
由 Luiz Capitulino 提交于
We can ignore calls to monitor_vprintf() in QMP mode and use monitor_puts() directly in monitor_json_emitter(). This allows us to drop this ugly hack. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Add configure options (--enable-debug-mon and --disable-debug-mon) plus the MON_DEBUG() macro. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Now that all handlers are converted to cmd_new_ret(), we can rename it back to cmd_new(). But now it returns a value. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Not that trivial as the call chain also has to be modified. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Note that this function only fails in QMP, in the user Monitor it prints the help text instead. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
The following handlers always succeed and hence can be converted to cmd_new_ret() in the same commit. - do_stop() - do_quit() - do_system_reset() - do_system_powerdown() - do_migrate_cancel() - do_qmp_capabilities() - do_migrate_set_speed() - do_migrate_set_downtime() Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
In order to implement the new error handling and debugging mechanism for command handlers, we need to change the cmd_new() callback to return a value. This commit introduces cmd_new_ret(), which returns a value and will be used only temporarily to handle the transition from cmd_new(). That is, as soon as all command handlers are ported to cmd_new_ret(), it will be renamed back to cmd_new() and the new error handling and debugging mechanism will be added on top of it. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 2月, 2010 7 次提交
-
-
由 Luiz Capitulino 提交于
QMP's chardev event callback doesn't call json_message_parser_destroy() on CHR_EVENT_CLOSED. As the call to json_message_parser_init() on CHR_EVENT_OPENED allocates memory, we'are leaking on close. Fix that by just calling json_message_parser_destroy() on CHR_EVENT_CLOSED. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Ideally, Monitor code should report an error only once and return the error information up the call chain. To assure that this happens as expected and that no error is lost, we have an assert() in qemu_error_internal(). However, we still have not fully converted handlers using monitor_printf() to report errors. As there can be multiple monitor_printf() calls on an error, the assertion is easily triggered when debugging is enabled; and we will get a memory leak if it's not. The solution to this problem is to allow multiple faults by only reporting the first one, and to release the additional error objects. A better mechanism to report multiple errors to programmers is underway. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
It's not needed to check the return of qobject_from_jsonf() anymore, as an assert() has been added there. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
With this commit QMP will be started in Capabilities Negotiation mode, where the only command allowed to run is 'qmp_capabilities'. All other commands will return CommandNotFound error. Asynchronous messages are not delivered either. When 'qmp_capabilities' is successfully executed QMP enters in Command mode, where all commands (except 'qmp_capabilities') are allowed to run and asynchronous messages are delivered. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This command will be used to enable QMP capabilities advertised by the capabilities array. Note that it will be mandatory to issue this command in order to make QMP functional (although this behavior is not being enforced by this commit). Also, as we don't have any capabilities yet, the new command doesn't accept any arguments. I will postpone the decision for a format for this until we get our first capability. Finally, this command is visible from the user Monitor too, in the meaning that you can execute it but it won't do anything. Making it only visible in QMP is beyond this series' goal, as it requires changes in unrelated places. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
With capability negotiation support clients will only have a chance to check QEMU's version (ie. issue 'query-version') after the negotiation procedure is done. It might be useful to clients to check QEMU's version before negotiating features, though. To allow that, this commit adds the QEMU's version object to the greeting message. Not really sure this is needed, but doesn't hurt anyway. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This commit adds the basic definitions for the BLOCK_IO_ERROR event, but actual event emission will be introduced by the next commits. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 2月, 2010 4 次提交
-
-
由 Markus Armbruster 提交于
This changes the error message from "Invalid CPU index" to "Invalid parameter index" in the human monitor. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
This is a double value with optional suffixes ms, us, ns. We'll need this to get migrate_set_downtime() QMP-ready. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
This is a double value with optional suffixes G, g, M, m, K, k. We'll need this to get migrate_set_speed() QMP-ready. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Was forgotten in commit b6e098d7. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 29 1月, 2010 1 次提交
-
-
由 Luiz Capitulino 提交于
Function is_async_return() added by commit 940cc30d assumes that 'data', which is returned by handlers, is always a QDict. This is not true, as QLists can also be returned, in this case we'll get a segfault. Fix that by checking if 'data' is a QDict. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 27 1月, 2010 8 次提交
-
-
由 Adam Litke 提交于
When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. Signed-off-by: NAdam Litke <agl@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Adam Litke 提交于
Qemu has a number of commands that can operate asynchronously (savevm, migrate, etc) and it will be getting more. For these commands, the user monitor needs to be suspended, but QMP monitors could continue to to accept other commands. This patch introduces a new command API that isolates the details of handling different monitor types from the actual command execution. A monitor command can use this API by implementing the mhandler.cmd_async handler (or info_async if appropriate). This function is responsible for submitting the command and does not return any data although it may raise errors. When the command completes, the QMPCompletion callback should be invoked with its opaque data and the command result. The process for submitting and completing an asynchronous command is different for QMP and user monitors. A user monitor must be suspended at submit time and resumed at completion time. The user_print() function must be passed to the QMPCompletion callback so the result can be displayed properly. QMP monitors are simpler. No submit time setup is required. When the command completes, monitor_protocol_emitter() writes the result in JSON format. This API can also be used to implement synchronous commands. In this case, the cmd_async handler should immediately call the QMPCompletion callback. It is my hope that this new interface will work for all commands, leading to a drastically simplified monitor.c once all commands are ported. Signed-off-by: NAdam Litke <agl@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
The returned QObject is a QList of all buses. Each bus is represented by a QDict, which has a key with a QList of all PCI devices attached to it. Each device is represented by a QDict. As has happended to other complex conversions, it's hard to split this commit as part of it are new functions which are called by each other. IMPORTANT: support for printing PCI bridge attached devices is NOT part of this commit, it's going to be added by the next commit, as it's untested. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kirill A. Shutemov 提交于
CC i386-softmmu/monitor.o cc1: warnings being treated as errors /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_memory_save': /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1318: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_physical_memory_save': /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1345: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result make[1]: *** [monitor.o] Error 1 Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
mon_get_cpu() can't return null pointer, because it passes its return value to cpu_synchronize_state() first, which crashes if its argument is null. Remove the (pretty cheesy) handling of this non-existing error. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 20 1月, 2010 5 次提交
-
-
由 Luiz Capitulino 提交于
Commit f039a563 introduces a regression as monitor_protocol_event() will return in the first user Monitor it finds in the QLIST_FOREACH() loop. The right thing to do is to only delivery an asynchronous event if the 'mon' is a QMP Monitor. The aforementioned commit was an early version, if it was applied to stable (it should) this one has to be applied there too. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Naphtali Sprei 提交于
Clean-up a little bit the RW related bits of BDRV_O_FLAGS. BDRV_O_RDONLY gone (and so is BDRV_O_ACCESS). Default value for bdrv_flags (0/zero) is READ-ONLY. Need to explicitly request READ-WRITE. Instead of using the field 'readonly' of the BlockDriverState struct for passing the request, pass the request in the flags parameter to the function. Signed-off-by: NNaphtali Sprei <nsprei@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Adam Litke 提交于
When using a control/QMP monitor in tandem with a regular monitor, asynchronous messages can get lost depending on the order of the QEMU program arguments. QEMU events issued by monitor_protocol_event() always go to cur_mon. If the user monitor was specified on the command line first (or it has ,default), the message will be directed to the user monitor (not the QMP monitor). Additionally, only one QMP session is currently able to receive async messages. To avoid this confusion, scan through the list of monitors and emit the message on each QMP monitor. Signed-off-by: NAdam Litke <agl@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
It's emitted when a VNC client session is activated by QEMU, client's information such as port, IP and auth ID (if the session is authenticated) are provided. Event example: { "event": "VNC_INITIALIZED", "timestamp": {"seconds": 1263475302, "microseconds": 150772}, "data": { "server": { "auth": "sasl", "family": "ipv4", "service": "5901", "host": "0.0.0.0"}, "client": { "family": "ipv4", "service": "46089", "host": "127.0.0.1", "sasl_username": "lcapitulino" } } } Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
It's emitted when a VNC client disconnects from QEMU, client's information such as port and IP address are provided. Event example: { "event": "VNC_DISCONNECTED", "timestamp": { "seconds": 1262976601, "microseconds": 975795 }, "data": { "server": { "auth": "sasl", "family": "ipv4", "service": "5901", "host": "0.0.0.0" }, "client": { "family": "ipv4", "service": "58425", "host": "127.0.0.1", "sasl_username": "foo" } } } Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-