The GTK 3.0 release was made in Feb, 2011:

  https://blog.gtk.org/2011/02/10/gtk-3-0-released/

That will soon be 7 years ago, which is enough time to consider
the 3.x series widely supported.

Thus we deprecate the GTK 2.x support, which will allow us to
delete it in the last release of 2018. By this time, GTK 3.x
will be almost 8 years old.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 20171212113440.16483-1-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

If kbd_queue is not empty and queue_count >= queue_limit,
we should free evt.

Change-Id: Ieeacf90d5e7e370a40452ec79031912d8b864d83
Signed-off-by: Nlinzhecheng <linzhecheng@huawei.com>
Message-id: 20171225023730.5512-1-linzhecheng@huawei.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

target-arm queue:
 * add aarch64_be linux-user target
 * Virt: ACPI: fix qemu assert due to re-assigned table data address
 * imx_fec: various bug fixes and cleanups
 * hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()
 * hw/sd/pxa2xx_mmci: add read/write() trace events
 * linux-user/arm/nwfpe: Check coprocessor number for FPA emulation
 * target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions
 * hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI
 * hw/intc/arm_gic: reserved register addresses are RAZ/WI

# gpg: Signature made Thu 11 Jan 2018 13:37:25 GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180111: (26 commits)
  hw/intc/arm_gic: reserved register addresses are RAZ/WI
  hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI
  target/arm: Make disas_thumb2_insn() generate its own UNDEF exceptions
  linux-user/arm/nwfpe: Check coprocessor number for FPA emulation
  hw/sd/pxa2xx_mmci: add read/write() trace events
  hw/timer/pxa2xx_timer: replace hw_error() -> qemu_log_mask()
  imx_fec: Reserve full FSL_IMX25_FEC_SIZE page for the register file
  imx_fec: Fix a typo in imx_enet_receive()
  imx_fec: Use correct length for packet size
  imx_fec: Add support for multiple Tx DMA rings
  imx_fec: Emulate SHIFT16 in ENETx_RACC
  imx_fec: Use MIN instead of explicit ternary operator
  imx_fec: Use ENET_FTRL to determine truncation length
  imx_fec: Move Tx frame buffer away from the stack
  imx_fec: Change queue flushing heuristics
  imx_fec: Refactor imx_eth_enable_rx()
  imx_fec: Do not link to netdev
  Virt: ACPI: fix qemu assert due to re-assigned table data address
  target/arm: Fix stlxp for aarch64_be
  linux-user: Activate armeb handler registration
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The GICv2 specification says that reserved register addresses
must RAZ/WI; now that we implement external abort handling
for Arm CPUs this means we must return MEMTX_OK rather than
MEMTX_ERROR, to avoid generating a spurious guest data abort.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>

The GICv3 specification says that reserved register addresses
should RAZ/WI. This means we need to return MEMTX_OK, not MEMTX_ERROR,
because now that we support generating external aborts the
latter will cause an abort on new board models.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>

Refactor disas_thumb2_insn() so that it generates the code for raising
an UNDEF exception for invalid insns, rather than returning a flag
which the caller must check to see if it needs to generate the UNDEF
code. This brings the function in to line with the behaviour of
disas_thumb_insn() and disas_arm_insn().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 1513080506-17703-1-git-send-email-peter.maydell@linaro.org

Our copy of the nwfpe code for emulating of the old FPA11 floating
point unit doesn't check the coprocessor number in the instruction
when it emulates it.  This means that we might treat some
instructions which should really UNDEF as being FPA11 instructions by
accident.

The kernel's copy of the nwfpe code doesn't make this error; I suspect
the bug was noticed and fixed as part of the process of mainlining
the nwfpe code more than a decade ago.

Add a check that the coprocessor number (which is always in bits
[11:8] of the instruction) is either 1 or 2, which is where the
FPA11 lives.
Reported-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 20180104000156.30932-1-f4bug@amsat.org
[PMM: add missing include]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 20180103224208.30291-2-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some i.MX SoCs (e.g. i.MX7) have FEC registers going as far as offset
0x614, so to avoid getting aborts when accessing those on QEMU, extend
the register file to cover FSL_IMX25_FEC_SIZE(16K) of address space
instead of just 1K.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use 'frame_size' instead of 'len' when calling qemu_send_packet(),
failing to do so results in malformed packets send in case when that
packed is fragmented into multiple DMA transactions.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

More recent version of the IP block support more than one Tx DMA ring,
so add the code implementing that feature.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Needed to support latest Linux kernel driver which relies on that
functionality.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Frame truncation length, TRUNC_FL, is determined by the contents of
ENET_FTRL register, so convert the code to use it instead of a
hardcoded constant.

To avoid the case where TRUNC_FL is greater that ENET_MAX_FRAME_SIZE,
increase the value of the latter to its theoretical maximum of 16K.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make Tx frame assembly buffer to be a paort of IMXFECState structure
to avoid a concern about having large data buffer on the stack.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In current implementation, packet queue flushing logic seem to suffer
from a deadlock like scenario if a packet is received by the interface
before before Rx ring is initialized by Guest's driver. Consider the
following sequence of events:

	1. A QEMU instance is started against a TAP device on Linux
	   host, running Linux guest, e. g., something to the effect
	   of:

	   qemu-system-arm \
	      -net nic,model=imx.fec,netdev=lan0 \
	      netdev tap,id=lan0,ifname=tap0,script=no,downscript=no \
	      ... rest of the arguments ...

	2. Once QEMU starts, but before guest reaches the point where
	   FEC deriver is done initializing the HW, Guest, via TAP
	   interface, receives a number of multicast MDNS packets from
	   Host (not necessarily true for every OS, but it happens at
	   least on Fedora 25)

	3. Recieving a packet in such a state results in
	   imx_eth_can_receive() returning '0', which in turn causes
	   tap_send() to disable corresponding event (tap.c:203)

	4. Once Guest's driver reaches the point where it is ready to
	   recieve packets it prepares Rx ring descriptors and writes
	   ENET_RDAR_RDAR to ENET_RDAR register to indicate to HW that
	   more descriptors are ready. And at this points emulation
	   layer does this:

	   	 s->regs[index] = ENET_RDAR_RDAR;
                 imx_eth_enable_rx(s);

	   which, combined with:

	   	  if (!s->regs[ENET_RDAR]) {
		     qemu_flush_queued_packets(qemu_get_queue(s->nic));
		  }

	   results in Rx queue never being flushed and corresponding
	   I/O event beign disabled.

To prevent the problem, change the code to always flush packet queue
when ENET_RDAR transitions 0 -> ENET_RDAR_RDAR.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Refactor imx_eth_enable_rx() to have more meaningfull variable name
than 'tmp' and to reduce number of logical negations done.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Binding to a particular netdev doesn't seem to belong to this layer
and should probably be done as a part of board or SoC specific code.

Convert all of the users of this IP block to use
qdev_set_nic_properties() instead.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

acpi_data_push uses g_array_set_size to resize the memory size. If there
is no enough contiguous memory, the address will be changed. If we use
the old value, it will assert.
qemu-kvm: hw/acpi/bios-linker-loader.c:214: bios_linker_loader_add_checksum:
Assertion `start_offset < file->blob->len' failed.`

This issue only happens in building SRAT table now but here we unify the
pattern for other tables as well to avoid possible issues in the future.
Signed-off-by: NZhaoshenglong <zhaoshenglong@huawei.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ldxp loads two consecutive doublewords from memory regardless of CPU
endianness. On store, stlxp currently assumes to work with a 128bit
value and consequently switches order in big-endian mode. With this
change it packs the doublewords in reverse order in anticipation of the
128bit big-endian store operation interposing them so they end up in
memory in the right order. This makes it work for both MTTCG and !MTTCG.
It effectively implements the ARM ARM STLXP operation pseudo-code:

data = if BigEndian() then el1:el2 else el2:el1;

With this change an aarch64_be Linux 4.14.4 kernel succeeds to boot up
in system emulation mode.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

armeb is missing from the target list in qemu-binfmt-conf.sh. Add it so
the handler for those binaries gets registered by the script.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-8-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Give big-endian arm and aarch64 CPUs their own family in
qemu-binfmt-conf.sh to make sure we register qemu-user for binaries of
the opposite endianness on arm and aarch64. Apart from the family
assignments of the magic values, qemu_get_family() needs to be able to
distinguish the two and recognise aarch64{,_be} as well.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-7-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As we now have a linux-user aarch64_be target, we can add it to the list
of supported targets in qemu-binfmt-conf.sh
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-6-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add target aarch64_be-linux-user. This allows a qemu-aarch64_be binary
to be built that will run big-endian aarch64 binaries.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-5-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Since for aarch64 the signal trampoline is synthesized directly into the
signal frame we need to make sure the instructions end up little-endian.
Otherwise the wrong endianness will cause a SIGILL upon return from the
signal handler on big-endian targets.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-4-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make big-endian aarch64 systems identify as aarch64_be as expected by
big-endian userland and toolchains.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-3-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Enable big-endian mode for data accesses on aarch64 for big-endian linux
user mode. Activate it for all exception levels as documented by ARM:
Set the SCTLR EE bit for ELs 1 through 3. Additionally set bit E0E in
EL1 to enable it in EL0 as well.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-2-michael.weiser@gmx.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ppc patch queue 2018-01-11

This pull request supersedes ppc-for-2.12-20180108 and several before
it.  The earlier pull request included a patch which exposed a bug in
the ARM TCG backend.  I've pulled that out and will repost once the
ARM bug is fixed (a patch has been posted by Richard Henderson).

Higlights from this series:
  * SLOF update
  * Several new devices for embedded platforms
  * Fix to correctly set compatiblity mode for hotplugged CPUs
  * dtc compile fix for older MacOS versions

# gpg: Signature made Thu 11 Jan 2018 04:58:11 GMT
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.12-20180111:
  spapr: Correct compatibility mode setting for hotplugged CPUs
  hw/ppc: Remove the deprecated spapr-pci-vfio-host-bridge device
  Update dtc to fix compilation problem on Mac OS 10.6
  target/ppc: more use of the PPC_*() macros
  ppc/pnv: change powernv_ prefix to pnv_ for overall naming consistency
  hw/ide: Emulate SiI3112 SATA controller
  spapr_pci: use warn_report()
  ppc4xx_i2c: Implement basic I2C functions
  sm501: Add some more unimplemented registers
  sm501: Add panel hardware cursor registers also to read function
  pseries: Update SLOF firmware image to qemu-slof-20171214
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

nbd patches for 2018-01-10

- Vladimir Sementsov-Ogievskiy: nbd: rename nbd_option and nbd_opt_reply
- Vladimir Sementsov-Ogievskiy: nbd/server: add additional assert to nbd_export_put

# gpg: Signature made Wed 10 Jan 2018 22:53:49 GMT
# gpg:                using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg:                 aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2018-01-10:
  nbd: rename nbd_option and nbd_opt_reply
  nbd/server: add additional assert to nbd_export_put
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

qemu-sparc update

# gpg: Signature made Tue 09 Jan 2018 22:12:22 GMT
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-signed: (25 commits)
  sun4u_iommu: add trace event for IOMMU translations
  sun4u_iommu: convert from IOMMU_DPRINTF to trace-events
  sun4u_iommu: update to reflect IOMMU is no longer part of the APB device
  sun4u: split IOMMU device out from apb.c to sun4u_iommu.c
  apb: QOMify IOMMU
  sun4m: remove include/hw/sparc/sun4m.h and all references to it
  sun4m: move IOMMU declarations from sun4m.h to sun4m_iommu.h
  sun4m: move sun4m_iommu.c from hw/dma to hw/sparc
  sun4u: switch from EBUS_DPRINTF() macro to trace-events
  sparc64: introduce trace-events for hw/sparc64
  apb: replace OBIO interrupt numbers in pci_pbmA_map_irq() with constants
  ebus: wire up OBIO interrupts to APB pbm via qdev GPIOs
  apb: remove busA property from PBMPCIBridge state
  apb: split pci_pbm_map_irq() into separate functions for bus A and bus B
  apb: remove pci_apb_init() and instantiate APB device using qdev
  apb: move the two secondary PCI bridges objects into APBState
  apb: use gpios to wire up the apb device to the SPARC CPU IRQs
  apb: return APBState from pci_apb_init() rather than PCIBus
  apb: APB QOMify tidy-up
  sun4u: move initialisation of all ISABus devices into ebus_realize()
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rename nbd_option and nbd_opt_reply to NBDOption and NBDOptionReply
to correspond to Qemu coding style and other structures here.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20171122101958.17065-5-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Currently the pseries machine sets the compatibility mode for the
guest's cpus in two places: 1) at machine reset and 2) after CAS
negotiation.

This means that if we set or negotiate a compatiblity mode, then
hotplug a cpu, the hotplugged cpu doesn't get the right mode set and
will incorrectly have the full native features.

To correct this, we set the compatibility mode on a cpu when it is
brought online with the 'start-cpu' RTAS call.  Given that we no
longer need to set the compatibility mode on all CPUs at machine
reset, so we change that to only set the mode for the boot cpu.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reported-by: NSatheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Tested-by: NSatheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

It's a deprecated dummy device since QEMU v2.6.0. That should have
been enough time to allow the users to update their scripts in case
they still use it, so let's remove this legacy code now.
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Currently QEMU does not build on Mac OS 10.6
because of a missing patch in the dtc
subproject. Updating dtc to make the patch
available fixes this problem.
Signed-off-by: NJohn Arbuckle <programmingkidx@gmail.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Also introduce utilities to manipulate bitmasks (originaly from OPAL)
which be will be used in the model of the XIVE interrupt controller.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The 'pnv' prefix is now used for all and the routines populating the
device tree start with 'pnv_dt'. The handler of the PnvXScomInterface
is also renamed to 'dt_xscom' which should reflect that it is
populating the device tree under the 'xscom@' node of the chip.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This is a common generic PCI SATA controller that is also used in PCs
but more importantly guests running on the Sam460ex board prefer this
card and have a driver for it (unlike for other SATA controllers
already emulated).
Signed-off-by: NBALATON Zoltan <balaton@eik.bme.hu>
Acked-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

These two are definitely warnings. Let's use the appropriate API.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>