The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.

The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add an authorization backend that talks to PAM to check whether the user
identity is allowed. This only uses the PAM account validation facility,
which is essentially just a check to see if the provided username is permitted
access. It doesn't use the authentication or session parts of PAM, since
that's dealt with by the relevant part of QEMU (eg VNC server).

Consider starting QEMU with a VNC server and telling it to use TLS with
x509 client certificates and configuring it to use an PAM to validate
the x509 distinguished name. In this example we're telling it to use PAM
for the QAuthZ impl with a service name of "qemu-vnc"

 $ qemu-system-x86_64 \
     -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
             endpoint=server,verify-peer=yes \
     -object authz-pam,id=authz0,service=qemu-vnc \
     -vnc :1,tls-creds=tls0,tls-authz=authz0

This requires an /etc/pam/qemu-vnc file to be created with the auth
rules. A very simple file based whitelist can be setup using

  $ cat > /etc/pam/qemu-vnc <<EOF
  account         requisite       pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow
  EOF

The /etc/qemu/vnc.allow file simply contains one username per line. Any
username not in the file is denied. The usernames in this example are
the x509 distinguished name from the client's x509 cert.

  $ cat > /etc/qemu/vnc.allow <<EOF
  CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
  EOF

More interesting would be to configure PAM to use an LDAP backend, so
that the QEMU authorization check data can be centralized instead of
requiring each compute host to have file maintained.

The main limitation with this PAM module is that the rules apply to all
QEMU instances on the host. Setting up different rules per VM, would
require creating a separate PAM service name & config file for every
guest. An alternative approach for the future might be to not pass in
the plain username to PAM, but instead combine the VM name or UUID with
the username. This requires further consideration though.
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a QAuthZListFile object type that implements the QAuthZ interface. This
built-in implementation is a proxy around the QAuthZList object type,
initializing it from an external file, and optionally, automatically
reloading it whenever it changes.

To create an instance of this object via the QMP monitor, the syntax
used would be:

      {
        "execute": "object-add",
        "arguments": {
          "qom-type": "authz-list-file",
          "id": "authz0",
          "props": {
            "filename": "/etc/qemu/vnc.acl",
	    "refresh": true
          }
        }
      }

If "refresh" is "yes", inotify is used to monitor the file,
automatically reloading changes. If an error occurs during reloading,
all authorizations will fail until the file is next successfully
loaded.

The /etc/qemu/vnc.acl file would contain a JSON representation of a
QAuthZList object

    {
      "rules": [
         { "match": "fred", "policy": "allow", "format": "exact" },
         { "match": "bob", "policy": "allow", "format": "exact" },
         { "match": "danb", "policy": "deny", "format": "glob" },
         { "match": "dan*", "policy": "allow", "format": "exact" },
      ],
      "policy": "deny"
    }

This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.

The object can be loaded on the comand line using

   -object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Add a QAuthZList object type that implements the QAuthZ interface. This
built-in implementation maintains a trivial access control list with a
sequence of match rules and a final default policy. This replicates the
functionality currently provided by the qemu_acl module.

To create an instance of this object via the QMP monitor, the syntax
used would be:

  {
    "execute": "object-add",
    "arguments": {
      "qom-type": "authz-list",
      "id": "authz0",
      "props": {
        "rules": [
           { "match": "fred", "policy": "allow", "format": "exact" },
           { "match": "bob", "policy": "allow", "format": "exact" },
           { "match": "danb", "policy": "deny", "format": "glob" },
           { "match": "dan*", "policy": "allow", "format": "exact" },
        ],
        "policy": "deny"
      }
    }
  }

This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.

It is not currently possible to create this via -object, since there is
no syntax supported to specify non-scalar properties for objects. This
is likely to be addressed by later support for using JSON with -object,
or an equivalent approach.

In any case the future "authz-listfile" object can be used from the
CLI and is likely a better choice, as it allows the ACL to be refreshed
automatically on change.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In many cases a single VM will just need to whitelist a single identity
as the allowed user of network services. This is especially the case for
TLS live migration (optionally with NBD storage) where we just need to
whitelist the x509 certificate distinguished name of the source QEMU
host.

Via QMP this can be configured with:

  {
    "execute": "object-add",
    "arguments": {
      "qom-type": "authz-simple",
      "id": "authz0",
      "props": {
        "identity": "fred"
      }
    }
  }

Or via the command line

  -object authz-simple,id=authz0,identity=fred
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The current qemu_acl module provides a simple access control list
facility inside QEMU, which is used via a set of monitor commands
acl_show, acl_policy, acl_add, acl_remove & acl_reset.

Note there is no ability to create ACLs - the network services (eg VNC
server) were expected to create ACLs that they want to check.

There is also no way to define ACLs on the command line, nor potentially
integrate with external authorization systems like polkit, pam, ldap
lookup, etc.

The QAuthZ object defines a minimal abstract QOM class that can be
subclassed for creating different authorization providers.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The internal inotify APIs allow a lot of conditional statements to be
cleared out, and provide a simpler callback for handling events.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Various functions accepting 'char *' string parameters were missing
'const' qualifiers.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

IN_ISDIR is not a bit that one can request when registering a
watch with inotify_add_watch. Rather it is a bit that is set
automatically when reading events from the kernel.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

When an object is in turn owned by another user object, it is not
desirable to expose this in the QOM object hierarchy. It is just an
internal implementation detail, we should be free to change without
exposure to apps managing QEMU.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The inotify userspace API for reading events is quite horrible, so it is
useful to wrap it in a more friendly API to avoid duplicating code
across many users in QEMU. Wrapping it also allows introduction of a
platform portability layer, so that we can add impls for non-Linux based
equivalents in future.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Pull request

# gpg: Signature made Fri 22 Feb 2019 14:07:01 GMT
# gpg:                using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request: (27 commits)
  tests/virtio-blk: add test for DISCARD command
  tests/virtio-blk: add test for WRITE_ZEROES command
  tests/virtio-blk: add virtio_blk_fix_dwz_hdr() function
  tests/virtio-blk: change assert on data_size in virtio_blk_request()
  virtio-blk: add DISCARD and WRITE_ZEROES features
  virtio-blk: set config size depending on the features enabled
  virtio-net: make VirtIOFeature usable for other virtio devices
  virtio-blk: add "discard" and "write-zeroes" properties
  virtio-blk: add host_features field in VirtIOBlock
  virtio-blk: add acct_failed param to virtio_blk_handle_rw_error()
  hw/ide: drop iov field from IDEDMA
  hw/ide: drop iov field from IDEBufferedRequest
  hw/ide: drop iov field from IDEState
  tests/test-bdrv-drain: use QEMU_IOVEC_INIT_BUF
  migration/block: use qemu_iovec_init_buf
  qemu-img: use qemu_iovec_init_buf
  block/vmdk: use qemu_iovec_init_buf
  block/qed: use qemu_iovec_init_buf
  block/qcow2: use qemu_iovec_init_buf
  block/qcow: use qemu_iovec_init_buf
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Various testing fixes:

  - Travis updates (inc disable isapc cdrom test)
  - Add gitlab control
  - Fix docker image
  - keep softloat tests short

# gpg: Signature made Fri 22 Feb 2019 09:51:36 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-next-220219-1:
  tests/cdrom-test: only include isapc cdrom test when g_test_slow()
  tests/softfloat: always do quick softfloat tests
  Add a gitlab-ci file for Continuous Integration testing on Gitlab
  tests/docker: peg netmap code to a specific version
  tests/docker: squash initial update and install step for debian9
  .travis.yml: Remove disable-uuid
  .travis.yml: Test with disable-replication
  .travis.yml: split debug builds
  .travis.yml: the xcode10 image seems to be hosed
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vga: bugfixes and edid support for virtio-vga

# gpg: Signature made Fri 22 Feb 2019 08:24:25 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190222-pull-request:
  display/virtio: add edid support.
  virtio-gpu: remove useless 'waiting' field
  virtio-gpu: block both 2d and 3d rendering
  virtio-gpu: remove unused config_size
  virtio-gpu: remove unused qdev
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ui: add support for -display spice-app
ui: gtk+sdl bugfixes.

# gpg: Signature made Fri 22 Feb 2019 07:53:13 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20190222-pull-request:
  display: add -display spice-app launching a Spice client
  spice: use a default name for the server
  qapi: document DisplayType enum
  build-sys: add gio-2.0 check
  char: register spice ports after spice started
  char: move SpiceChardev and open_spice_port() to spice.h header
  spice: do not stop spice if VM is paused
  spice: merge options lists
  spice: avoid spice runtime assert
  char/spice: discard write() if backend is disconnected
  char/spice: trigger HUP event
  ui/gtk: Fix the license information
  sdl2: drop qemu_input_event_send_key_qcode call
  spice: set device address and device display ID in QXL interface
  kbd-state: don't block auto-repeat events
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

VFIO updates 2019-02-21

 - Workaround kernel overflow bug in vfio type1 DMA unmap
   (Alex Williamson)

 - Refactor vfio container initialization (Eric Auger)

# gpg: Signature made Fri 22 Feb 2019 05:21:07 GMT
# gpg:                using RSA key 239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex@shazbot.org>" [full]
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>" [full]
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B  8A90 239B 9B6E 3BB0 8B22

* remotes/awilliam/tags/vfio-updates-20190221.0:
  hw/vfio/common: Refactor container initialization
  vfio/common: Work around kernel overflow bug in DMA unmap
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix dino pci config access.

# gpg: Signature made Thu 21 Feb 2019 19:03:26 GMT
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-hppa-20190221:
  hw/hppa/dino: mask out lower 2 bits of PCI config addr
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Allow const void * as argument to helpers.
Remove obsolete TODO file.

# gpg: Signature made Thu 21 Feb 2019 18:59:11 GMT
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20190221:
  include/exec/helper-head.h: support "const void *" in helper calls
  tcg: Remove TODO file
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

MIPS queue for February 21st, 2019, v2

# gpg: Signature made Thu 21 Feb 2019 18:37:04 GMT
# gpg:                using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01  DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-feb-21-2019-v2:
  target/mips: fulong2e: Dynamically generate SPD EEPROM data
  target/mips: fulong2e: Fix bios flash size
  hw/pci-host/bonito.c: Add PCI mem region mapped at the correct address
  target/mips: implement QMP query-cpu-definitions command
  tests/tcg: target/mips: Add wrappers for MSA integer compare instructions
  tests/tcg: target/mips: Change directory name 'bit-counting' to 'bit-count'
  tests/tcg: target/mips: Correct path to headers in some test source files
  hw/misc: mips_itu: Fix 32/64 bit issue in a line involving shift operator
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If the DISCARD feature is enabled, we try this command in the
test_basic(), checking only the status returned by the request.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-11-sgarzare@redhat.com
Message-Id: <20190221103314.58500-11-sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If the WRITE_ZEROES feature is enabled, we check this command
in the test_basic().
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Acked-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-10-sgarzare@redhat.com
Message-Id: <20190221103314.58500-10-sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This function is useful to fix the endianness of struct
virtio_blk_discard_write_zeroes headers.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-9-sgarzare@redhat.com
Message-Id: <20190221103314.58500-9-sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The size of data in the virtio_blk_request must be a multiple
of 512 bytes for IN and OUT requests, or a multiple of the size
of struct virtio_blk_discard_write_zeroes for DISCARD and
WRITE_ZEROES requests.
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-8-sgarzare@redhat.com
Message-Id: <20190221103314.58500-8-sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch adds the support of DISCARD and WRITE_ZEROES commands,
that have been introduced in the virtio-blk protocol to have
better performance when using SSD backend.

We support only one segment per request since multiple segments
are not widely used and there are no userspace APIs that allow
applications to submit multiple segments in a single call.
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-7-sgarzare@redhat.com
Message-Id: <20190221103314.58500-7-sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Starting from DISABLE and WRITE_ZEROES features, we use an array of
VirtIOFeature (as virtio-net) to properly set the config size
depending on the features enabled.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-6-sgarzare@redhat.com
Message-Id: <20190221103314.58500-6-sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

In order to use VirtIOFeature also in other virtio devices, we move
its declaration and the endof() macro (renamed in virtio_endof())
in virtio.h.
We add virtio_feature_get_config_size() function to iterate the array
of VirtIOFeature and to return the config size depending on the
features enabled. (as virtio_net_set_config_size() did)
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-5-sgarzare@redhat.com
Message-Id: <20190221103314.58500-5-sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

In order to avoid migration issues, we enable DISCARD and
WRITE_ZEROES features only for machine type >= 4.0

As discussed with Michael S. Tsirkin and Stefan Hajnoczi on the
list [1], DISCARD operation should not have security implications
(eg. page cache attacks), so we can enable it by default.

[1] https://lists.gnu.org/archive/html/qemu-devel/2019-02/msg00504.htmlSuggested-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-4-sgarzare@redhat.com
Message-Id: <20190221103314.58500-4-sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Since configurable features for virtio-blk are growing, this patch
adds host_features field in the struct VirtIOBlock. (as in virtio-net)
In this way, we can avoid to add new fields for new properties and
we can directly set VIRTIO_BLK_F* flags in the host_features.

We update "config-wce" and "scsi" property definition to use the new
host_features field without change the behaviour.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-3-sgarzare@redhat.com
Message-Id: <20190221103314.58500-3-sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

We add acct_failed param in order to use virtio_blk_handle_rw_error()
also when is not required to call block_acct_failed(). (eg. a discard
operation is failed)
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-2-sgarzare@redhat.com
Message-Id: <20190221103314.58500-2-sgarzare@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

@iov is used only to initialize @qiov. Let's use new
qemu_iovec_init_buf() instead, which simplifies the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-18-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-18-vsementsov@virtuozzo.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

@iov is used only to initialize @qiov. Let's use new
qemu_iovec_init_buf() instead, which simplifies the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-17-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-17-vsementsov@virtuozzo.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

@iov is used only to initialize @qiov. Let's use new
qemu_iovec_init_buf() instead, which simplifies the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-16-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-16-vsementsov@virtuozzo.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use new QEMU_IOVEC_INIT_BUF() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-15-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-15-vsementsov@virtuozzo.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-14-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-14-vsementsov@virtuozzo.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-13-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-13-vsementsov@virtuozzo.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-12-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-12-vsementsov@virtuozzo.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-11-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-11-vsementsov@virtuozzo.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-10-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-10-vsementsov@virtuozzo.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-9-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-9-vsementsov@virtuozzo.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Use new QEMU_IOVEC_INIT_BUF() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-8-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-8-vsementsov@virtuozzo.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>