In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
block-stream to accept a node-name without lifting the restriction that
we're operating at a root node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>

This allows the creation of an empty scsi-cd device without manually
creating a BlockBackend.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This allows the creation of an empty ide-cd device without manually
creating a BlockBackend.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Acked-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The 9P spec at http://man.cat-v.org/plan_9/5/intro says:

All directories must support walks to the directory .. (dot-dot) meaning
parent directory, although by convention directories contain no explicit
entry for .. or . (dot).  The parent of the root directory of a server's
tree is itself.

This means that a client cannot walk further than the root directory
exported by the server. In other words, if the client wants to walk
"/.." or "/foo/../..", the server should answer like the request was
to walk "/".

This patch just does that:
- we cache the QID of the root directory at attach time
- during the walk we compare the QID of each path component with the root
  QID to detect if we're in a "/.." situation
- if so, we skip the current component and go to the next one
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

According to the 9P spec http://man.cat-v.org/plan_9/5/open about the
create request:

The names . and .. are special; it is illegal to create files with these
names.

This patch causes the create and lcreate requests to fail with EINVAL if
the file name is either "." or "..".

Even if it isn't explicitly written in the spec, this patch extends the
checking to all requests that may cause a directory entry to be created:

    - mknod
    - rename
    - renameat
    - mkdir
    - link
    - symlink

The unlinkat request also gets patched for consistency (even if
rmdir("foo/..") is expected to fail according to POSIX.1-2001).

The various error values come from the linux manual pages.
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Empty path components don't make sense for most commands and may cause
undefined behavior, depending on the backend.

Also, the walk request described in the 9P spec [1] clearly shows that
the client is supposed to send individual path components: the official
linux client never sends portions of path containing the / character for
example.

Moreover, the 9P spec [2] also states that a system can decide to restrict
the set of supported characters used in path components, with an explicit
mention "to remove slashes from name components".

This patch introduces a new name_is_illegal() helper that checks the
names sent by the client are not empty and don't contain unwanted chars.
Since 9pfs is only supported on linux hosts, only the / character is
checked at the moment. When support for other hosts (AKA. win32) is added,
other chars may need to be blacklisted as well.

If a client sends an illegal path component, the request will fail and
ENOENT is returned to the client.

[1] http://man.cat-v.org/plan_9/5/walk
[2] http://man.cat-v.org/plan_9/5/introSuggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* pc-bios/optionrom/Makefile fix for -O0
* revert socket_connect change

# gpg: Signature made Tue 30 Aug 2016 15:36:59 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  optionrom: cope with multiple -O options
  Revert "Change net/socket.c to use socket_*() functions"
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reproducer:

    CFLAGS="-g3 -O0" ./configure --target-list=aarch64-softmmu,arm-softmmu --enable-vhost-net --enable-virtfs

Here CFLAGS ends up with "-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 ... -g3 -O0"
and pc-bios/optionrom/Makefile forgets to add the -O2 it needs.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since commit 7e844959, the socket connect code is blocking, because
calling socket_connect() without callback is blocking.  This reverts the
commit.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

tb_flush does all kind of things, which are very tcg specific. As it
is called from some places even for KVM (e.g. gdb server) it is better
to detect these cases and do an early exit.
This also fixes a crash in the gdb server that was triggered by
commit 909eaac9 ("tb hash: track translated blocks with qht").
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Reported-by: NRichard Henderson <rth@twiddle.net>
Reported-by: NBrent Baccala <cosine@freesoft.org>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1472148686-39841-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In previous commit

  commit c7628bff
  Author: Gerd Hoffmann <kraxel@redhat.com>
  Date:   Fri Oct 30 12:10:09 2015 +0100

    vnc: only alloc server surface with clients connected

the VNC server was changed so that the 'vd->server' pixman
image was only allocated when a client is connected.

Since then if a client disconnects and then reconnects to
the VNC server all they will see is a black screen until
they do something that triggers a refresh. On a graphical
desktop this is not often noticed since there's many things
going on which cause a refresh. On a plain text console it
is really obvious since nothing refreshes frequently.

The problem is that the VNC server didn't update the guest
dirty bitmap, so still believes its server image is in sync
with the guest contents.

To fix this we must explicitly mark the entire guest desktop
as dirty after re-creating the server surface. Move this
logic into vnc_update_server_surface() so it is guaranteed
to be call in all code paths that re-create the surface
instead of only in vnc_dpy_switch()
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NPeter Lieven <pl@kamp.de>
Tested-by: NPeter Lieven <pl@kamp.de>
Message-id: 1471365032-18096-1-git-send-email-berrange@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio: fixes

some bugfixes for virtio
balloon is still broken wrt migration
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 23 Aug 2016 17:33:11 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  virtio: decrement vq->inuse in virtqueue_discard()
  virtio: recalculate vq->inuse after migration
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Must include "qemu-version.h" for the QEMU_PKGVERSION definition.
Signed-off-by: NEd Maste <emaste@freebsd.org>
Message-id: 1471877833-52343-1-git-send-email-emaste@freebsd.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtqueue_discard() moves vq->last_avail_idx back so the element can be
popped again.  It's necessary to decrement vq->inuse to avoid "leaking"
the element count.

Cc: qemu-stable@nongnu.org
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The vq->inuse field is not migrated.  Many devices don't hold
VirtQueueElements across migration so it doesn't matter that vq->inuse
starts at 0 on the destination QEMU.

At least virtio-serial, virtio-blk, and virtio-balloon migrate while
holding VirtQueueElements.  For these devices we need to recalculate
vq->inuse upon load so the value is correct.

Cc: qemu-stable@nongnu.org
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Mon 22 Aug 2016 09:06:32 BST
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  e1000e: remove internal interrupt flag
  slirp: fix segv when init failed
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit 66bf7d58 removed internal msi state flag E1000E_USE_MSI, E1000E_USE_MSIX
is not necessary too, remove it now. And interrupt flag field intr_state also
can be removed now.

CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NDmitry Fleytman <dmitry@daynix.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Since commit f6c2e66a, slirp uses an exit notifier to call
slirp_smb_cleanup. However, if init() failed, the notifier isn't added,
and removing it will fail:

==18447== Invalid write of size 8
==18447==    at 0x7EF2B5: notifier_remove (notify.c:32)
==18447==    by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661)
==18447==    by 0x6A2187: net_slirp_cleanup (slirp.c:134)
==18447==    by 0x69419D: qemu_cleanup_net_client (net.c:338)
==18447==    by 0x69445B: qemu_del_net_client (net.c:401)
==18447==    by 0x6A2B81: net_slirp_init (slirp.c:366)
==18447==    by 0x6A4241: net_init_slirp (slirp.c:865)
==18447==    by 0x695C6D: net_client_init1 (net.c:1051)
==18447==    by 0x695F6E: net_client_init (net.c:1108)
==18447==    by 0x696DBA: net_init_netdev (net.c:1498)
==18447==    by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116)
==18447==    by 0x696E60: net_init_clients (net.c:1516)
==18447==  Address 0x0 is not stack'd, malloc'd or (recently) free'd
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Since f6880b7f [qemu-log: support simple pid substitution for logs],
test-logging creates files with hard-coded names in /tmp. In the best
case, this prevents multiple developers from running "make check" on
the same machine. In the worst case, it allows for symlink attacks,
enabling an attacker to overwrite files that are writable to the
developer running "make check".

Instead of hard-coding the paths, create a temporary directory using
g_dir_make_tmp() and clean it up afterwards.

Fixes: f6880b7f ("qemu-log: support simple pid substitution for logs")
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1471545963-11720-3-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We're going to make use of g_dir_make_tmp() in test-logging. Provide a
compatibility implementation of it for glib < 2.30.

May behave differently in some edge cases (e.g. pattern only at the
end of the template, the file name is not part of the error message),
but good enough in practice.
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1471545963-11720-2-git-send-email-silbe@linux.vnet.ibm.com
[PMM: removed variable "template" which caused compilation failures
 when C++ files include glib-compat.h]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In 9c371467 I've tried to fix a broken build with older
linux-headers. However, I didn't do it properly. The solution
implemented here is to grab the enums that caused the problem
initially, and rename their values so that they are "QEMU_"
prefixed. In order to guarantee matching values with actual
enums from linux-headers, the enums are seeded with starting
values from the original enums.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 75c14d6e8a97c4ff3931d69c13eab7376968d8b4.1471593869.git.mprivozn@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The fix I've made there was wrong. I mean, basically what I did
there was equivalent to:

  #if 0
  some code;
  #endif

This reverts commit 9c371467.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 40d61349e445c1ad5fef795da704bf7ed6e19c86.1471593869.git.mprivozn@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Thu 18 Aug 2016 14:39:31 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  block: fix possible reorder of flush operations
  block: fix deadlock in bdrv_co_flush
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch reduce CPU usage of flush operations a bit. When we have one
flush completed we should kick only next operation. We should not start
all pending operations in the hope that they will go back to wait on
wait_queue.

Also there is a technical possibility that requests will get reordered
with the previous approach. After wakeup all requests are removed from
the wait queue. They become active and they are processed one-by-one
adding to the wait queue in the same order. Though new flush can arrive
while all requests are not put into the queue.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Tested-by: NEvgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: NEvgeny Yakovlev <eyakovlev@virtuozzo.com>
Message-id: 1471457214-3994-3-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The following commit
    commit 3ff2f67a
    Author: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
    Date:   Mon Jul 18 22:39:52 2016 +0300
    block: ignore flush requests when storage is clean
has introduced a regression.

There is a problem that it is still possible for 2 requests to execute
in non sequential fashion and sometimes this results in a deadlock
when bdrv_drain_one/all are called for BDS with such stalled requests.

1. Current flushed_gen and flush_started_gen is 1.
2. Request 1 enters bdrv_co_flush to with write_gen 1 (i.e. the same
   as flushed_gen). It gets past flushed_gen != flush_started_gen and
   sets flush_started_gen to 1 (again, the same it was before).
3. Request 1 yields somewhere before exiting bdrv_co_flush
4. Request 2 enters bdrv_co_flush with write_gen 2. It gets past
   flushed_gen != flush_started_gen and sets flush_started_gen to 2.
5. Request 2 runs to completion and sets flushed_gen to 2
6. Request 1 is resumed, runs to completion and sets flushed_gen to 1.
   However flush_started_gen is now 2.

From here on out flushed_gen is always != to flush_started_gen and all
further requests will wait on flush_queue. This change replaces
flush_started_gen with an explicitly tracked active flush request.
Signed-off-by: NEvgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Message-id: 1471457214-3994-2-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

# gpg: Signature made Thu 18 Aug 2016 06:36:16 BST
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  net/net: properly handle multiple packets in net_fill_rstate()
  net: vmxnet: use g_new for pkt initialisation
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix 'make docker-test-mingw@fedora'

Peter,

This is the single patch that stalls patchew's mingw testing. Since it
is small and trivial, let's have it in 2.7.

Fam

# gpg: Signature made Wed 17 Aug 2016 13:13:53 BST
# gpg:                using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/docker-pull-request:
  curl: Cast fd to int for DPRINTF
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When network is busy, we will receive multiple packets at one time. In
that situation, we should keep trying to do the receiving instead of
finalizing only the first packet.
Signed-off-by: NZhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: NLi Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

When network transport abstraction layer initialises pkt, the maximum
fragmentation count is not checked. This could lead to an integer
overflow causing a NULL pointer dereference. Replace g_malloc() with
g_new() to catch the multiplication overflow.
Reported-by: NLi Qiang <liqiang6-s@360.cn>
Signed-off-by: NPrasad J Pandit <pjp@fedoraproject.org>
Acked-by: NDmitry Fleytman <dmitry@daynix.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Currently "make docker-test-mingw@fedora" has a warning like:

    /tmp/qemu-test/src/block/curl.c: In function 'curl_sock_cb':
    /tmp/qemu-test/src/block/curl.c:172:6: warning: format '%d' expects
    argument of type 'int', but argument 4 has type 'curl_socket_t {aka long
    long unsigned int}'
         DPRINTF("CURL (AIO): Sock action %d on fd %d\n", action, fd);
          ^
    cc1: all warnings being treated as errors

Cast to int to suppress it.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1470027888-24381-1-git-send-email-famz@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The llseek syscall takes two 32-bit arguments, offset_high
and offset_low, which must be combined to form a single
64-bit offset. Unfortunately we were combining them with
   (uint64_t)arg2 << 32) | arg3
and arg3 is a signed type; this meant that when promoting
arg3 to a 64-bit type it would be sign-extended. The effect
was that if the offset happened to have bit 31 set then
this bit would get sign-extended into all of bits 63..32.
Explicitly cast arg3 to abi_ulong to avoid the erroneous
sign extension.
Reported-by: NChanho Park <parkch98@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NChanho Park <parkch98@gmail.com>
Message-id: 1470938379-1133-1-git-send-email-peter.maydell@linaro.org

In c5dff280 we tried to make us understand netlink messages more.
So we've added a code that does some translation. However, the
code assumed linux-headers to be at least version 4.4 of it
because most of the symbols there (if not all of them) were added
in just that release. This, however, breaks build on systems with
older versions of the package.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Message-id: 23806aac6db3baf7e2cdab4c62d6e3468ce6b4dc.1471340849.git.mprivozn@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

input-send-event is now stable since
6575ccdd.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 20160811112041.18616-1-marcandre.lureau@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-i386: kernel_irqchip=off fix for KVM

# gpg: Signature made Tue 16 Aug 2016 12:55:42 BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-pull-request:
  target-i386: kvm: Report kvm_pv_unhalt as unsupported w/o kernel_irqchip
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The kvm_pv_unhalt feature doesn't work if kernel_irqchip is
disabled, so we need to report it as unsupported.
Tested-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>