Synopsis

    size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4]

    size[4] Rmkdir tag[2] qid[13]

Description

    mkdir asks the file server to create a directory with given name,
    mode and gid. The qid for the new directory is returned with
    the mkdir reply message.

Note: 72 is selected as the opcode for TMKDIR from the reserved list.
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
[jvrao@linux.vnet.ibm.com: Fix perm handling when creating directory]
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Implement TMKNOD as part of 2000.L Work

Synopsis

    size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4]

    size[4] Rmknod tag[2] qid[13]

Description

    mknod asks the file server to create a device node with given device
    type, mode and gid. The qid for the new device node is returned with
    the mknod reply message.
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

SYNOPSIS

    size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4]

    size[4] Rlcreate tag[2] qid[13] iounit[4]

DESCRIPTION

The Tlreate request asks the file server to create a new regular file with the
name supplied, in the directory (dir) represented by fid.
The mode argument specifies the permissions to use. New file is created with
the uid if the fid and with supplied gid.

The flags argument represent Linux access mode flags with which the caller
is requesting to open the file with. Protocol allows all the Linux access
modes but it is upto the server to allow/disallow any of these acess modes.
If the server doesn't support any of the access mode, it is expected to
return error.

To start with we will not restricit/limit any Linux flags on this server.
If needed, We can start restricting as we move forward with various use cases.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

This patch implements creating a symlink for TSYMLINK request
and responds with RSYMLINK. In the case of error, we return RERROR.

SYNOPSIS

    size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4]

    size[4] Rsymlink tag[2] qid[13]

    DESCRIPTION

    Create a symbolic link named 'name' pointing to 'symtgt'.
    gid represents the effective group id of the caller.
    The  permissions of a symbolic link are irrelevant hence it is omitted
    from the protocol.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Create a Hardlink.

SYNOPSIS

size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s]

size[4] Rlink tag[2]

DESCRIPTION

Create a link 'newpath' in directory pointed by dfid linking to oldfid path.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

SYNOPSIS

      size[4] Tsetattr tag[2] attr[n]

      size[4] Rsetattr tag[2]

   DESCRIPTION

      The setattr command changes some of the file status information.
      attr resembles the iattr structure used in Linux kernel. It
      specifies which status parameter is to be changed and to what
      value. It is laid out as follows:

         valid[4]
            specifies which status information is to be changed. Possible
            values are:
            ATTR_MODE       (1 << 0)
            ATTR_UID        (1 << 1)
            ATTR_GID        (1 << 2)
            ATTR_SIZE       (1 << 3)
            ATTR_ATIME      (1 << 4)
            ATTR_MTIME      (1 << 5)
            ATTR_CTIME      (1 << 5)
            ATTR_ATIME_SET  (1 << 7)
            ATTR_MTIME_SET  (1 << 8)

            The last two bits represent whether the time information
            is being sent by the client's user space. In the absense
            of these bits the server always uses server's time.

         mode[4]
            File permission bits

         uid[4]
            Owner id of file

         gid[4]
            Group id of the file

         size[8]
            File size

         atime_sec[8]
            Time of last file access, seconds

         atime_nsec[8]
            Time of last file access, nanoseconds

         mtime_sec[8]
            Time of last file modification, seconds

         mtime_nsec[8]
            Time of last file modification, nanoseconds

Explanation of the patches:
--------------------------

*) The kernel just copies relevent contents of iattr structure to p9_iattr_dotl
   structure and passes it down to the client. The only check it has is calling
   inode_change_ok()
*) The p9_iattr_dotl structure does not have ctime and ia_file parameters because
   I don't think these are needed in our case. The client user space can request
   updating just ctime by calling chown(fd, -1, -1). This is handled on server
   side without a need for putting ctime on the wire.
*) The server currently supports changing mode, time, ownership and size of the
   file.
*) 9P RFC says "Either all the changes in wstat request happen, or none of them
   does: if the request succeeds, all changes were made; if it fails, none were."
   I have not done anything to implement this specifically because I don't see
   a reason.

[jvrao@linux.vnet.ibm.com: Parts of code for handling chown(-1,-1)
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Currently v9fs_do_utimensat takes a V9fsStat argument and builds
timespec structures. It sets tv_nsec values to 0 by default. Instead
of this it should take struct timespec[2] and pass it down to the
system directly. This will make it more generic and useful
elsewhere.
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

    Current code resets file's atime to 0 when there is a change in mtime.
    This results in resetting the atime to "1970-01-01 05:30:00". For
    example, truncate -s 0 filename results in changing the mtime to the
    truncate time, but resets the atime to "1970-01-01 05:30:00". utime
    system call does not have any provision to set only mtime or atime. So
    change v9fs_wstat_post_chmod function to use utimensat function to change
    the atime and mtime fields. If tv_nsec field is set to the special value
    "UTIME_OMIT", corresponding file time stamp is not updated.
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

           SYNOPSIS

              size[4] Tgetattr tag[2] fid[4] request_mask[8]

              size[4] Rgetattr tag[2] lstat[n]

           DESCRIPTION

              The getattr transaction inquires about the file identified by fid.
              request_mask is a bit mask that specifies which fields of the
              stat structure is the client interested in.

              The reply will contain a machine-independent directory entry,
              laid out as follows:

                 st_result_mask[8]
                    Bit mask that indicates which fields in the stat structure
                    have been populated by the server

                 qid.type[1]
                    the type of the file (directory, etc.), represented as a bit
                    vector corresponding to the high 8 bits of the file's mode
                    word.

                 qid.vers[4]
                    version number for given path

                 qid.path[8]
                    the file server's unique identification for the file

                 st_mode[4]
                    Permission and flags

                 st_uid[4]
                    User id of owner

                 st_gid[4]
                    Group ID of owner

                 st_nlink[8]
                    Number of hard links

                 st_rdev[8]
                    Device ID (if special file)

                 st_size[8]
                    Size, in bytes

                 st_blksize[8]
                    Block size for file system IO

                 st_blocks[8]
                    Number of file system blocks allocated

                 st_atime_sec[8]
                    Time of last access, seconds

                 st_atime_nsec[8]
                    Time of last access, nanoseconds

                 st_mtime_sec[8]
                    Time of last modification, seconds

                 st_mtime_nsec[8]
                    Time of last modification, nanoseconds

                 st_ctime_sec[8]
                    Time of last status change, seconds

                 st_ctime_nsec[8]
                    Time of last status change, nanoseconds

                 st_btime_sec[8]
                    Time of creation (birth) of file, seconds

                 st_btime_nsec[8]
                    Time of creation (birth) of file, nanoseconds

                 st_gen[8]
                    Inode generation

                 st_data_version[8]
                    Data version number

              request_mask and result_mask bit masks contain the following bits
                 #define P9_STATS_MODE          0x00000001ULL
                 #define P9_STATS_NLINK         0x00000002ULL
                 #define P9_STATS_UID           0x00000004ULL
                 #define P9_STATS_GID           0x00000008ULL
                 #define P9_STATS_RDEV          0x00000010ULL
                 #define P9_STATS_ATIME         0x00000020ULL
                 #define P9_STATS_MTIME         0x00000040ULL
                 #define P9_STATS_CTIME         0x00000080ULL
                 #define P9_STATS_INO           0x00000100ULL
                 #define P9_STATS_SIZE          0x00000200ULL
                 #define P9_STATS_BLOCKS        0x00000400ULL

                 #define P9_STATS_BTIME         0x00000800ULL
                 #define P9_STATS_GEN           0x00001000ULL
                 #define P9_STATS_DATA_VERSION  0x00002000ULL

                 #define P9_STATS_BASIC         0x000007ffULL
                 #define P9_STATS_ALL           0x00003fffULL

        This patch implements the client side of getattr implementation for 9P2000.L.
        It introduces a new structure p9_stat_dotl for getting Linux stat information
        along with QID. The data layout is similar to stat structure in Linux user
        space with the following major differences:

        inode (st_ino) is not part of data. Instead qid is.

        device (st_dev) is not part of data because this doesn't make sense on the
        client.

        All time variables are 64 bit wide on the wire. The kernel seems to use
        32 bit variables for these variables. However, some of the architectures
        have used 64 bit variables and glibc exposes 64 bit variables to user
        space on some architectures. Hence to be on the safer side we have made
        these 64 bit in the protocol. Refer to the comments in
        include/asm-generic/stat.h

        There are some additional fields: st_btime_sec, st_btime_nsec, st_gen,
        st_data_version apart from the bitmask, st_result_mask. The bit mask
        is filled by the server to indicate which stat fields have been
        populated by the server. Currently there is no clean way for the
        server to obtain these additional fields, so it sends back just the
        basic fields.
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>

Compute iounit based on the host filesystem block size and pass it to
client with open/create response. Also return iounit as statfs's f_bsize
for optimal block size transfers.
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Reviewd-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

This patch implements the server part of readdir() implementation for
9p2000.L

    SYNOPSIS

    size[4] Treaddir tag[2] fid[4] offset[8] count[4]
    size[4] Rreaddir tag[2] count[4] data[count]

    DESCRIPTION

    The readdir request asks the server to read the directory specified by 'fid'
    at an offset specified by 'offset' and return as many dirent structures as
    possible that fit into count bytes. Each dirent structure is laid out as
    follows.

            qid.type[1]
              the type of the file (directory, etc.), represented as a bit
              vector corresponding to the high 8 bits of the file's mode
              word.

            qid.vers[4]
              version number for given path

            qid.path[8]
              the file server's unique identification for the file

            offset[8]
              offset into the next dirent.

            type[1]
              type of this directory entry.

            name[256]
              name of this directory entry.
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Reviewed-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>

In v9fs_remove_post_remove() we currently ignore the error returned by
the previous call to remove() and return an error only if freeing the
fid fails. However, the client expects to see the error from remove().
Currently the client falsely thinks that the remove call has always
succeeded. For example, doing rmdir on a non-empty directory does
not return ENOTEMPTY.

With this patch we ignore the error from free_fid(). The client cannot
use this error value anyway.
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Implement statfs support in qemu server based on Sripathi's
initial statfs patch.
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Make 9P server recognize 9P2000.L protocol version
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

bswap_NN() variants are not always available in CONFIG_MACHINE_BSWAP_H case
and bswapNN() are public APIs in "bswap.h".
Signed-off-by: NIzumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NSerge Ziryukin <ftrvxmtrx@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

stat() fields can be more or less anything depending on configuration, cast
explicitly to uint64_t to avoid printf() format mismatches.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When making copy of arguments we were doing partial copy
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

There is no need to check for dest < 0 or vector >= 0 as both are
uint16_t.

This should fix problems with broken build with aggressive compiler
flags. Reported by Xudong Hao <xudong.hao@intel.com>
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NCam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Do not store return of get_image_size() in a uint32_t as it makes it
impossible to detect error returns from get_image_size.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix a warning from OpenBSD linker:
../libhw32/vl.o(.text+0x5c3c): In function `main':
/src/qemu/vl.c:2335: warning: sprintf() is often misused, please use snprintf()
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

acpi table file can be modified during load so file size check
should be more strict.
pointer calculation should be after qemu_realloc(). not before realloc().
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

https://bugs.launchpad.net/bugs/611646
reports that ./i386-softmmu/qemu -M isapc segfaults.
This patch fixes the segfault introduced by
f885f1ea

It's because i440fx_state in pc_init1() isn't initialized.

> Core was generated by `./i386-softmmu/qemu -M isapc'.
> Program terminated with signal 11, Segmentation fault.
> [New process 19686]
>     at qemu/hw/piix_pci.c:136
> (gdb) where
>     at qemu/hw/piix_pci.c:136
>     boot_device=0x7fffe1f5b040 "cad", kernel_filename=0x0,
>     kernel_cmdline=0x6469bf "", initrd_filename=0x0,
>     cpu_model=0x654d10 "486", pci_enabled=0)
>     at qemu/hw/pc_piix.c:178
>     boot_device=0x7fffe1f5b040 "cad", kernel_filename=0x0,
>     kernel_cmdline=0x6469bf "", initrd_filename=0x0, cpu_model=0x654d10 "486")
>     at qemu/hw/pc_piix.c:207
>     envp=0x7fffe1f5b188)
>     at qemu/vl.c:2871
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

It is possible that subpage mmio is registered over existing memory
page. When this happens "memory" will have real memory address and not
index into io_mem array so next access to the page will generate
segfault. It is uncommon to have some part of a page to be accessed as
memory and some as mmio, but qemu shouldn't crash even when guest does
stupid things. So lets just pretend that the rest of the page is
unassigned if guest configure part of the memory page as mmio.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Combining bitwise AND and logical NOT is suspicious.

Fixed by this Coccinelle script:
// From http://article.gmane.org/gmane.linux.kernel/646367
@@ expression E1,E2; @@
(
 !E1 & !E2
|
- !E1 & E2
+ !(E1 & E2)
)
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Update Sparc32 and Sparc64 OpenBIOS images to SVN revision 859.

Bring also pc-bios/README up to date including the update performed by
419ef5f1.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

We can't use the return value of load_uimage() for the kernel because it
can't account for BSS size, and the PowerPC kernel does not relocate
blobs before zeroing BSS.

Instead, we now load at the fixed addresses chosen by u-boot (the normal
firmware for the board).
Signed-off-by: NHollis Blanchard <hollis@penguinppc.org>

The PowerPC 4xx SDRAM controller emulation unregisters RAM in its reset
callback. However, qemu_system_reset() is now called at initialization
time, so all RAM is unregistered before starting the guest (!).
Signed-off-by: NHollis Blanchard <hollis@penguinppc.org>

The message "Truncating memory to %d MiB to fit SDRAM controller limits"
should be displayed only when a user chooses an amount of RAM which
can't be represented by the PPC 4xx SDRAM controller (e.g. 129MB, which
would only be valid if the controller supports a bank size of 1MB).
Signed-off-by: NHollis Blanchard <hollis@penguinppc.org>

We must be able to use a non-native strip executable, but not all
versions of 'install' support the --strip-program option (e.g.
OpenBSD). Accordingly, we can't use 'install -s', and we must run strip
separately.
Signed-off-by: NHollis Blanchard <hollis@penguinppc.org>
Cc: blauwirbel@gmail.com

This updates the openBIOS binary to r589, adding support for PPC PV feature
pass-through in KVM.
Signed-off-by: NAlexander Graf <agraf@suse.de>

On KVM for PPC we need to tell the guest which instructions to use when
doing a hypercall. The clean way to do this is to go through an ioctl
from userspace and passing it on to the guest using the device tree.

So let's do the qemu part here: read out the hypercall and pass it on
to the guest's fw_cfg so openBIOS can read it out and expose it again.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Changing block.h or blockdev.h resulted in recompiling most objects.

Move DriveInfo typedef and BlockInterfaceType enum definitions
to qemu-common.h and rearrange blockdev.h use to decrease churn.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>