audio: remove obsolete backends (esd, fmod, winwave).
audio: stop using global variables, small fixes.
audio: remove some obsolte and unused code.

# gpg: Signature made Mon Jun 15 13:24:44 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-audio-20150615-1:
  ossaudio: use trace events instead of debug config flag
  alsaaudio: use trace events instead of verbose
  dsoundaudio: remove primary buffer
  dsoundaudio: remove *_retries kludges
  audio: remove plive
  audio: remove LOG_TO_MONITOR along with default_mon
  MAINTAINERS: remove malc from audio
  sdlaudio: do not allow multiple instances
  coreaudio: do not use global variables where possible
  dsoundaudio: do not use global variables
  paaudio: fix possible resource leak
  wavaudio: do not use global variables
  ossaudio: do not use global variables
  alsaaudio: do not use global variables
  paaudio: do not use global variables
  audio: expose drv_opaque to init_out and init_in
  only enable dsound in case the header file is present
  audio: remove winwave audio driver
  audio: remove fmod backend
  audio: remove esd backend
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

s390x/kvm/watchdog

1. Implement a diag288 based watchdog
2. Fix virtio-ccw BIOS for gcc >= 4.9

# gpg: Signature made Mon Jun 15 12:36:25 2015 BST using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"

* remotes/borntraeger/tags/s390x-20150615:
  s390/bios: build with -fdelete-null-pointer-checks
  watchdog: Add new Virtual Watchdog action INJECT-NMI
  nmi: Implement inject_nmi() for non-monitor context use
  s390x/watchdog: diag288 migration support
  s390x/kvm: diag288 instruction interception and handling
  s390x/watchdog: introduce diag288 watchdog device
  watchdog: change option wording to allow for more watchdogs
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Starting with version 4.9, GCC assumes it can't safely dereference null
pointers, and uses this for some optimizations. On s390, the lowcore
memory is located at address 0, so this assumption is wrong and breaks
the s390-ccw firmware. Pass -fdelete-null-pointer-checks to avoid that.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Message-Id: <1434363843-14576-1-git-send-email-aurelien@aurel32.net>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Enabling this option just creates a playback buffer with the specified settings,
and then ignores it. It's probably some outdated hack to set audio formats on
windows. (The first created stream dictates all other streams settings, at least
on some Windows versions). Setting DAC_FIXED_SETTINGS should have the same
effect as setting (the now removed) primary buffer.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

According to MSDN this may happen when the window is not in the foreground, but
the default is 1 since a long time (which means no retries), so it should be ok.
I've found no problems during testing it on Windows 7 and wine, so this was
probably only the case with some old Windows versions.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

It was useless even 3 years ago, so it can probably safely go away:
https://lists.nongnu.org/archive/html/qemu-devel/2012-03/msg02427.htmlSigned-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log
to the monitor before it's being initialized), and also nothing else in
qemu logs to the monitor.

This log to monitor feature was the last thing that used the default_mon
variable, so I removed it too (as using it can cause problems).
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

email bounces, with a appearently permanent error:
"av1474@comtv.ru mail receiving disabled, rejecting"
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NGonglei <arei.gonglei@huawei.com>

Since SDL uses a lot of global data, we can't create independent
instances of sdl audio backend.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

qpa_audio_init did not clean up resources properly if the initialization
failed. This hopefully fixes it.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Currently the opaque pointer returned by audio_driver's init is only
exposed to the driver's fini, but not to audio_pcm_ops. This way if
someone wants to share a variable with the driver and the pcm, he must
use global variables. This patch fixes it by adding a third parameter to
audio_pcm_op's init_out and init_in.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Block layer core and image format patches

# gpg: Signature made Fri Jun 12 16:08:53 2015 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (25 commits)
  block: Fix reopen flag inheritance
  block: Add BlockDriverState.inherits_from
  block: Add list of children to BlockDriverState
  queue.h: Add QLIST_FIX_HEAD_PTR()
  block: Drain requests before swapping nodes in bdrv_swap()
  block: Move flag inheritance to bdrv_open_inherit()
  block: Use QemuOpts in bdrv_open_common()
  block: Use macro for cache option names
  vmdk: Use bdrv_open_image()
  quorum: Use bdrv_open_image()
  check-qdict: Test cases for new functions
  qdict: Add qdict_{set,copy}_default()
  qdict: Add qdict_array_entries()
  iotests: Add tests for overriding BDRV_O_PROTOCOL
  block: driver should override flags in bdrv_open()
  block: Change bitmap truncate conditional to assertion
  block: record new size in bdrv_dirty_bitmap_truncate
  raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
  vmdk: Use vmdk_find_index_in_cluster everywhere
  vmdk: Fix index_in_cluster calculation in vmdk_co_get_block_status
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

DirectSound should be a superior choice on Windows.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

ESD is no longer developed and replaced by PulseAudio.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

# gpg: Signature made Fri Jun 12 15:57:47 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  qemu-iotests: expand test 093 to support group throttling
  throttle: Update throttle infrastructure copyright
  throttle: add the name of the ThrottleGroup to BlockDeviceInfo
  throttle: acquire the ThrottleGroup lock in bdrv_swap()
  throttle: Add throttle group support
  throttle: Add throttle group infrastructure tests
  throttle: Add throttle group infrastructure
  throttle: Extract timers from ThrottleState into a separate structure
  raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
  Revert "iothread: release iothread around aio_poll"
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When reopening an image, the block layer already takes care to reopen
bs->file as well with recalculated inherited flags. The same must happen
for any other child (most notably missing before this patch: backing
files).

If bs->file (or any other child) didn't originally inherit from bs, e.g.
because it was created separately and then only referenced, it must not
inherit flags on reopen either, so check the inherited_from field before
propagation the reopen down.

VMDK already reopened its extents manually; this code can now be
dropped.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Currently, the block layer assumes that any block node can have only one
parent, and if it has a parent, that it inherits some options/flags from
this parent.

This is not true any more: With references used in block device
creation, a single node can be used by multiple parents, or it can be
created separately and not inherit flags from any parent.

To handle reopens correctly, a node must know from which parent it
inherited options. This patch adds the information to BlockDriverState.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

This allows iterating over all children of a given BDS, not only
including bs->file and bs->backing_hd, but also driver-specific
ones like VMDK extents or Quorum children.

For bdrv_swap(), the list of children of the swapped BDS stays at that
BDS (because that's where the pointers stay as well). The list head
moves and pointers to it must be fixed up therefore.

The list of children in the parent of the swapped BDS is not affected by
the swap. The contents of the BDS objects is swapped, so the existing
pointer in the parent automatically points to the newly swapped in BDS.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

If the head of a list has been moved to a different memory location, the
le_prev link in the first list entry has to be fixed up. Provide a macro
that implements this fixup.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

bdrv_swap() requires that there are no requests in flight on either of
the two devices. The request coroutine would work on the wrong
BlockDriverState object (with bs->opaque even being interpreted as a
different type potentially) and all sorts of bad things would result
from this.

The currently existing callers mostly ensure that there is no I/O
pending on nodes that are swapped. In detail, this is:

1. Live snapshots. This goes through qmp_transaction(), which calls
   bdrv_drain_all() before doing anything. The command is executed
   synchronously, so no new I/O can be issued concurrently.

2. snapshot=on in bdrv_open(). We're in the middle of opening the image
   (both the original image and its temporary overlay), so there can't
   be any I/O in flight yet.

3. Mirroring. bdrv_drain() is already used on the source device so that
   the mirror doesn't miss anything. However, the main loop runs between
   that and the bdrv_swap() (which is actually a bug, being addressed in
   another series), so there is a small window in which new I/O might be
   issued that would be in flight during bdrv_swap().

It is safer to just drain the request queue of both devices in
bdrv_swap() instead of relying on callers to do the right thing.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Instead of letting every caller of bdrv_open() determine the right flags
for its child node manually and pass them to the function, pass the
parent node and the role of the newly opened child (like backing file,
protocol layer, etc.).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Instead of manually parsing options and then deleting them from the
options QDict, just use QemuOpts like most other places that deal with
block device options.

More options will be added there and then QemuOpts is a lot more
manageable than open-coding everything.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>

Besides standardising on a single interface for opening child nodes,
this patch allows the user to specify options to individual extent
nodes. Overriding file names isn't possible with this yet, so it's of
limited usefulness, but still a step forward.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>

Besides standardising on a single interface for opening child nodes,
this simplifies the .bdrv_open() implementation of the quorum block
driver by using block layer functionality for handling BlockdevRefs.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>

This adds test cases for the following new QDict functions:

* qdict_array_entries()
* qdict_set_default_str()
* qdict_copy_default()
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

In the block layer functions that determine options for a child block
device, it's a common pattern to either copy options from the parent's
options or to set a default string if the option isn't explicitly set
yet for the child. Provide convenience functions so that it becomes a
one-liner for each option.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This counts the entries in a flattened array in a QDict without
actually splitting the QDict into a QList.

bdrv_open_image() doesn't take a QList, but rather a QDict and a key
prefix string, so this is more convenient for block drivers which have a
dynamically sized list of child nodes (e.g. Quorum) and are to be
converted to using bdrv_open_image() as the standard interface for
opening child nodes.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

# gpg: Signature made Fri Jun 12 13:57:20 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  qmp/hmp: add rocker device support
  rocker: bring link up/down on PHY enable/disable
  rocker: update tests using hw-derived interface names
  rocker: Add support for phys name
  iohandler: Change return type of qemu_set_fd_handler to "void"
  event-notifier: Always return 0 for posix implementation
  xen_backend: Remove unused error handling of qemu_set_fd_handler
  oss: Remove unused error handling of qemu_set_fd_handler
  alsaaudio: Remove unused error handling of qemu_set_fd_handler
  main-loop: Drop qemu_set_fd_handler2
  Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handler
  tap: Drop tap_can_send
  net/socket: Drop net_socket_can_send
  netmap: Drop netmap_can_send
  l2tpv3: Drop l2tpv3_can_send
  stubs: Add qemu_set_fd_handler
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This adds tests for overriding the qemu-internal BDRV_O_PROTOCOL flag by
explicitly specifying a block driver. As one test must be run over the
NBD protocol while the other must not, this patch adds two separate
iotests.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>