b55a37c9 moved the call to cpu_reset
to user emulators. But cpu_copy also initializes a CPU structure, so add the
call also there.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Problem: x86 systems could not survive a few system_resets.

Clear most of IDE state when reset. Implement the missing reset handlers.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

There is absolutely no need to call reset functions when initializing
devices. Since we are already registering them, calling qemu_system_reset()
should suffice. Actually, it is what happens when we reboot the machine,
and using the same process instead of a special case semantics will even
allow us to find bugs easier.

Furthermore, the fact that we initialize things like the cpu quite early,
leads to the need to introduce synchronization stuff like qemu_system_cond.
This patch removes it entirely. All we need to do is call qemu_system_reset()
only when we're already sure the system is up and running

I tested it with qemu (with and without io-thread) and qemu-kvm, and it
seems to be doing okay - although qemu-kvm uses a slightly different patch.

[ v2: user mode still needs cpu_reset, so put it in ifdef. ]
[ v3: leave qemu_system_cond for now. ]
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Line counter doesn't wrap.
Signed-off-by: Nmalc <av1474@comtv.ru>

Unbreaks setup screen of Act1/PL
Signed-off-by: Nmalc <av1474@comtv.ru>

The page 108 of the SPARC Version 8 Architecture Manual describes
that addcc and addxcc shall compute carry flag the same way.
The page 110 claims the same about subcc and subxcc instructions.
This patch fixes carry computation in corner cases and removes redundant code.
The most visible effect of the patch is enabling Solaris boot when using OBP.
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
[blauwirbel@gmail.com: cleaned up formatting]
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds SHDC support (-sd sd.img, where sd.img is
larger than 1GB) to qemu.
Signed-off-by: NJason S. McMullan <jason.mcmullan@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

You would only see this error on a fresh clone when srcdir == objdir.  configure
will fail because roms/pcbios doesn't exist.

git submodule integration doesn't cleanup very well when switching between
branches so you'll get an roms/pcbios directory from normal operations if you
switch between old branches.

Thanks to a mistake in configure, if you build outside of srcdir, you'll also
get a valid roms/pcbios.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

  commit 71f4effc
  Author: Alexander Graf <agraf@suse.de>
  Date:   Fri Oct 30 22:27:00 2009 +0100

      Unbreak tap compilation on OS X

Broke the build on Linux due to a bad #if guard
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently compiling the tap sources breaks on Mac OS X. This is because of:

  1) tap-linux.h requiring Linux includes
  2) typos
  3) missing #includes

This patch adds what's necessary to compile tap happily on Mac OS X.
I haven't tested if using tap actually works, but I don't think that's a
major issue as that code was probably seriously untested before already.

I didn't split the patch, because it's only a few lines of code and
splitting is probably not worth the effort here.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 94ca5a98.

This is similiar to the default with most bare metal systems.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The gPXE rom supports BEV properly.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

etherboot is deprecated and not under active development anymore.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

SeaBIOS is a port of pc-bios to GCC.  Besides using a more modern tool chain,
SeaBIOS introduces a number of new features including PMM support, better
BEV and BCV support, and better PnP support.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This commit:

    commit 97b15621
    virtio: use qdev properties for configuration.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

makes a guest using virtio-net see an empty macaddr because we never
copy the macaddr into the location that virtio_net_get_config() uses.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fixes a couple of issues with msix table access:
- With misbehaving guests, misaligned 4 byte access could overflow
  msix table and cause qemu to segfault. Since PCI spec requires
  host to only issue dword-aligned accesses, as a fix,
  it's enough to mask the address low bits.
- Tables use pci format, not native format, and so
  we must use pci_[sg]et_long on read/write.
Reported-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

wmb must be at least a compiler barrier, even without SMP.
Further, we likely need some rmb()/mb() as well:
I have not audited the code but lguest has mb(),
add a comment for now.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The context parameter in paio_submit isn't used anyway, so there is no reason
why block drivers should need to remember it. This also avoids passing a Linux
AIO context to paio_submit (which doesn't do any harm as long as the parameter
is unused, but it is highly confusing).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Sometimes when linking with gcc to get a predictable result you are suggested to also apply the compiler flags to the linker command.

For reference, please read:
http://gcc.gnu.org/onlinedocs/gcc-4.4.2/gcc/Link-Options.htmlSigned-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Serial frames always start with a start bit.
This bit was missing in frame size calculation.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* Allow any speed value which is defined for Linux
  (and possibly other systems).
* Compare int values instead of double values.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Changes:

 * We don't create/delete devices, we attach/detach them instead.
 * The separate autofilter list is gone, we simply walk the list
   of devices directly instead.
 * Autofiltering is done unconditionally now.  Non-auto device scan
   code got dropped.
 * Autofiltering turns off the timer if there is nothing to do, it
   runs only in case there are unattached host devices.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Hook up usb_msd_init.

Also rework handling of encrypted block devices,
move the code out vl.c.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a auto_attach field to USBDevice, which is enabled by default.
USB drivers can clear this field in case they do *not* want the device
being attached (i.e. plugged into a usb port) automatically after
successfull init().

Use cases (see next patches):
 * attaching encrypted mass storage devices.
 * -usbdevice host:...
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patchs adds infrastructure to handle -usbdevice via qdev callbacks.
USBDeviceInfo gets a name field (for the -usbdevice driver name) and a
callback for -usbdevice parameter parsing.

The new usbdevice_create() function walks the qdev driver list and looks
for a usb driver with a matching name.  When a parameter parsing
callback is present it is called, otherwise the device is created via
usb_create_simple().
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The pc bios shows up in 'info roms' now.

Note that the BIOS is mapped to two places: The complete rom at the top
of the memory, and the first 128k at 0xe0000.  Only the first place is
listed in 'info roms'.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The rom_add_vga() and rom_add_option() macros are transformed into
functions.  They look at the new rom_enable_driver_roms variable
and only do something if it is set to non-zero, making vga+option rom
loading runtime option.  pc_init() sets rom_enable_driver_roms to 1.

With this in place we can move the rom loading calls from pc.c to the
individual drivers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>