Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

189 was allocated in upstream binutils.

0xbaab was the old temporary value. Still used by some tools and the
linux kernel.

I've seen 115 in older gdb versions, but lets ignore that one.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Setting the registers one by one is easier to read, and gets
optimized by the compiler just the same.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch enhances the algorithm which finds the correct settings for SDL.
For cross compilations (when cross_prefix is set), it looks for sdl-config
with cross prefix. Here is the complete search order:

$(cross_prefix}pkg-config              (old, only used for cross compilation)
${cross_prefix}sdl_config              (new, only used for cross compilation)
pkg-config                             (old, needs PATH)
sdl-config                             (old, needs PATH)

Cross SDL packages (or the user) now can simply set a link (for example
/usr/bin/i586-mingw32msvc-sdl-config -> /usr/i586-mingw32msvc/bin/sdl-config)
which allows cross compilations without PATH modifications.

Without the patch, configure and make (which calls configure) typically
need a non-standard PATH. Failing to set this special PATH results in
broken builds.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

For SMP to work with KVM, we need to properly emulate the SIGP Initial Reset
Command. Recent (2.6.32) kernels issue that before the SIGP Reset command that
actually wakes up the vcpu.

This patch makes -smp work on S390x.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This function had been disabled from the beginning:
see 9fddaa0c

cpu_reset() function is in target-ppc/helper.c
Signed-off-by: NThomas Monjalon <thomas@monjalon.net>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch adds a firmware blob to the S390 target. The blob is a simple
implementation of a virtio client that tries to read the second stage
bootloader from sectors described as of offset 0x20 in the MBR.

In combination with an updated zipl this allows for booting from virtio
block devices. This firmware is built from the same sources as the second
stage bootloader. You can find a virtio capable s390-tools in this repo:

git://repo.or.cz/s390-tools.gitSigned-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When running with --enable-io-thread the timer we have doesn't help,
because it doesn't wake up the CPU thread. So instead we need to
actually kick it.

While at it I refined the logic a bit to not dumbly trigger a timer
every 500ms, but rather do it more often after an interrupt got injected.
If there's no level based interrupt to be expected, we don't need the
timer anyways.

This makes qemu-system-ppc with --enable-io-thread work when using KVM.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

chardev_init functions use socket,so socket_init() shoud be placed at
the front of chardev_init on win32.
Signed-off-by: NTeLeMan <geleman@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

If the user wants to create a chardev of type socket but forgets to give a
host= option, qemu_opt_get returns NULL. This NULL pointer is then fed into
strlen a few lines below without a check which results in a segfault.
This fixes it.
Signed-off-by: NJens Osterkamp <jens@linux.vnet.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

rlim_t conversion between host and target added.
Otherwise there are some incorrect case like
- RLIM_INFINITY on 32bit target -> 64bit host.
- RLIM_INFINITY on 64bit host -> mips and sparc target ?
- Big value(for 32bit target) on 64bit host -> 32bit target.

One is added into getrlimit, setrlimit, and ugetrlimit. It converts both
RLIM_INFINITY and value bigger than target can hold(>31bit) to RLIM_INFINITY.

Another one is added to guest_stack_size calculation introduced by
703e0e89. The rule is mostly same except the result on the case is keeping
the value of guest_stack_size.

Slightly tested for SH4, and x86_64 -linux-user on x86_64-pc-linux host.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

12 compilations less for the full build.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The special case doesn't really us buy anything. Without it vvfat works more
consistently as a protocol. We get raw on top of vvfat now, which works just
as well as using vvfat directly.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The 'parent' field in the 'query-blockstats' monitor command is
part of the top level block device QDict, not part of the 2nd
level 'stats' QDict.

* block.c: Fix docs for 'parent' field in block stats monitor
  command output
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There is a call to free() where qemu_free() should instead be used.
Signed-off-by: NBruce Rogers <brogers@novell.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The fix is based on a patch from Kevin Wolf. Here his comment:

"The number of blocks needs to be rounded up to cover all of the virtual hard
disk. Without this fix, we can't even open our own images if their size is not
a multiple of the block size."

While Kevin's patch addressed vdi_create, my modification also fixes
vdi_open which now accepts images with odd disk sizes.

v3:
Don't allow reading of disk images with too large disk sizes.
Neither VBoxManage nor old versions of qemu-img read such images.
This change requires rounding of odd disk sizes before we do the checks.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: François Revol <revol@free.fr>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.

Dmg actually does an lseek to a negative offset in the open routine,
which we replace with offset arithmetics after doing a bdrv_getlength.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use pread instead of lseek + read in preparation of using the qemu
block API.  Note that dmg actually uses the implicit file offset
a lot in dmg_open, and we had to replace it with an offset variable.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When dmg_read_chunk encounters an uncompressed chunk it currently
calls read without any previous adjustment of the file postion.

This seems very wrong, and the "reference" implementation in
dmg2img does a search to the same offset as done in the various
compression cases, so do the same here.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The VHD algorithm calculates a disk geometry
which is usually smaller than the requested size.

QEMU tried to round up but failed for certain sizes:

qemu-img create -f vpc disk.vpc 9437184
would create an image with 9435136 bytes
(which is too small for qemu-img convert).

Instead of hacking the geometry algorithm, the patch
increases the number of sectors until we get enough
sectors.

Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use pread instead of lseek + read in preparation of using the qemu
block API.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Even it is not very useful, users may create images of size 0.

Without the special option CONFIG_ZERO_MALLOC, qemu_mallocz
aborts execution when it is told to allocate 0 bytes,
so avoid this kind of call.

Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When reopening the image, don't guess the driver, but use the same driver as
was used before. This is important if the format=... option was used for that
image.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We can't assume the file protocol for Windows devices, they need the same
detection as other files for which an explicit protocol is not specified.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use container_of for one direction and &acb->common for the other one.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use pread instead of lseek + read in preparation of using the qemu
block API.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When cancelling a request, bdrv_aio_cancel may decide that it waits for
completion of a request rather than for cancellation. IDE therefore can't
abandon its DMA status before calling bdrv_aio_cancel; otherwise the callback
of a completed request would use invalid data.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use bdrv_pwrite to access the backing device instead of pread, and
convert the driver to implementing the bdrv_open method which gives
it an already opened BlockDriverState for the underlying device.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use pread instead of lseek + read in preparation of using the qemu
block API.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

- use err(3) instead of errx(3) if errno is available
  to report why failed
- let fail prior to daemon(3) if opening a nbd file
  is likely to fail after daemonizing to avoid silent
  failure exit
- add missing 'ret = 1' when unix_socket_outgoing failed
Signed-off-by: NRyota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- fix off by one error in spill trap number bit for other window (must be bit 5)
- fixes invalid instruction issue with HelenOS
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- must use store address operand to demap, not store value
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>