Attached is a patch to fix a typo in 'P' packet processing for M68K.

Without this patch, QEMU fails to honor GDB's P packets from GDB
(writing to registers) for the address registers (A0 - A7).

The problem is because of an obvious typo.  Notice that the second
"if" condition is meant to be n < 16 in:

  if (n < 8) {
    :
  } else if (n < 8) {
Signed-off-by: NKazu Hirata <kazu@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This avoids an unnecessary REX.W prefix when dealing with AND
operands that fit into a 32-bit quantity.  The most common change
actually seen is movz[wb]q -> movz[wb]l.

Similarly, avoid REXW in ext{8,16}u_i64 tcg opcodes.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch adds hardware cursor feature to SM501 graphics chip emulation,
to make the graphic console more useful for QEMU SH4 users.
Signed-off-by: NShin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The stat64/fstat64 syscalls are broken for alpha linux-user.

This is because Alpha, even though it is native 64-bits, has a stat64
syscall that is different than regular stat.  This means that the
"TARGET_LONG_BITS==64" check in syscall.c isn't enough.  Below is
a patch that fixes things for me, although it might not be the cleanest
fix.

This issue keeps sixtrack and fma3d spec2k benchmarks from running.
Signed-off-by: NVince Weaver <vince@csl.cornell.edu>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Raise the zone protection fault in ESR for TLB faults caused by
zone protection bits.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The 40x MMU has 15 zones in the ZPR register.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Bailout on 40x TLB entries with endianess swapping only if the entry
is valid.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The ZSEL was incorrectly beeing decoded from TLBHI. Decode it from
TLBLO instead.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

According to RFC 1350 and RFC 2347, TFTP server should answer RRQ by
either OACK or DATA packet. Qemu's internal TFTP server answers RRQ with
additional options by sending both OACK and DATA packet, thus breaking
the "lock-step" feature of the protocol, and also confuses client.

  Proposed solution would be to, in case of OACK packet, wait for ACK
from client and just then start sending data. Attached patch implements
this.
Signed-off-by: NThomas Horsten <thomas@horsten.com>
Signed-off-by: NMilan Plzik <milan.plzik@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Initialize KVM paravirt cpuid leaf and allow user to control guest
visible PV features through -cpu flag.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As pointed out by clang size is only ever written to, but never actually
used.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that we do not have to flush the backing device anymore implementing
the bdrv_aio_flush method for image formats is trivial.

[hch: forward ported to qemu mainline from a product tree]
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The backing device is only modified from bdrv_commit.  So instead of
flushing it every time bdrv_flush is called for the front-end device
only flush it after we're written data to it in bdrv_commit.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer points out a redundant increment.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer points out a redundant assignment.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer points out a redundant assignment.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer points out a redundant assignment.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer points out value assigned to 'len' is not used.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

clang-analyzer pointed out the value of 'sockets' is never reused.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
CC: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 3a03bfa5 added a fallback in case the Linux kernel running qemu is older
than the kernel of the build system. Unfortunately, v1 was committed instead of
v2, so the code has a bug that was revealed in the review (checking for the
wrong error code).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This adds a rebase subcommand to qemu-img which allows to change the backing
file of an image.

In default mode, both the current and the new backing file need to exist, and
after the rebase, the COW image is guaranteed to have the same guest visible
content as before. To achieve this, old and new backing file are compared and,
if necessary, data is copied from the old backing file into the COW image.

With -u an unsafe mode is enabled that doesn't require the backing files to
exist. It merely changes the backing file reference in the COW image. This is
useful for renaming or moving the backing file. The user is responsible to make
sure that the new backing file has no changes compared to the old one, or
corruption may occur.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Introduce the functions needed to change the backing file of an image. The
function is implemented for qcow2.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If an image references a backing file that doesn't exist, qemu-img info fails
to open this image. Exactly in this case the info would be valuable, though:
the user might want to find out which file is missing.

This patch introduces a BDRV_O_NO_BACKING flag to ignore the backing file when
opening the image. qemu-img info is the first user and provides info now even
if the backing file is invalid.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move 200 lines out of vl.c already into common code that only needs to
be compiled once.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Together with the first patch this enables using the prefixed
pkg-config, thus picking up the correct flags for SDL.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

After the next commit, pkg-config could be used for the shared library
configuration case and sdl-config for static libraries.  So I prepare
the test here by doing two changes:

at the same time I remove useless backslashes from the invocation of
grep;

1) fixing a typo ($sd_cflags).  The typo has been there since commit
1ac88f28 (remove sdl_static. Just do the right thing if static is yes,
2009-07-27).

2) fixing an erroneous "test `... | grep > /dev/null`" idiom that would
never succeed since grep's output would be empty;

3) checking the status code after executing sdl-config --static --libs;
this is needed for the next patch only.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since pkgconfig can give different output for different targets,
it should be tried with the cross-compilation prefix first.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Although the value stored to 'addr' is used in the enclosing expression,
the value is never actually read from 'addr'.

Probably a typo.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The variable is_annulled is referenced in a FIXME comment, so instead
of removing the variable, comment out the lines so that the FIXME
can be understood.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

pci_get_byte, pci_get_word, pci_get_long and pci_get_quad
all take a const uint8_t pointer, because they only read
the configuration data.

Their prototypes should reflect this fact.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use new way to associate ROM files to devices.

Currently, there is only a ROM file for i82559er
included in QEMU, so the patch does not add
.romfile for the other devices.

When flexible mode is fixed in eepro100, adding
more ROM files will be possible. It should be
possible to create them from pxe-i82559er.bin,
because etherboot uses the same driver for all
eepro100 devices (only PCI ids differ).

Maybe it is even possible to create a single
pxe-i8255x.bin which supports all eepro100 devices
(not supported with current etherboot).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The numerical value was wrong (0x2800 instead of 0x0280)
which indeed did not make sense.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Turns out on those versions of FreeBSD (>= 7.x) that know OSS_GETVERSION
the ioctl doesn't actually work yet (except in the Linuxolator), so if
building on FreeBSD assume the sound drivers are new enough if the ioctl
returns the errno it does currently on FreeBSD.

(Rev 2 after private discussion with malc.)
Signed-off-by: NJuergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Nmalc <av1474@comtv.ru>

Mac feature bit isn't going to work as all network cards already have a
'mac' property to set the mac address.  Remove it from mask and add in
get_features.
Reported-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>