- 02 3月, 2018 29 次提交
-
-
由 Peter Maydell 提交于
The IoTKit Security Controller includes various registers that expose to software the controls for the Peripheral Protection Controllers in the system. Implement these. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-17-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
The Arm IoT Kit includes a "security controller" which is largely a collection of registers for controlling the PPCs and other bits of glue in the system. This commit provides the initial skeleton of the device, implementing just the ID registers, and a couple of read-only read-as-zero registers. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-16-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
Add a model of the TrustZone peripheral protection controller (PPC), which is used to gate transactions to non-TZ-aware peripherals so that secure software can configure them to not be accessible to non-secure software. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-15-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
The MPS2 AN505 FPGA image includes a "FPGA control block" which is a small set of registers handling LEDs, buttons and some counters. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-14-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
In some board or SoC models it is necessary to split a qemu_irq line so that one input can feed multiple outputs. We currently have qemu_irq_split() for this, but that has several deficiencies: * it can only handle splitting a line into two * it unavoidably leaks memory, so it can't be used in a device that can be deleted Implement a qdev device that encapsulates splitting of IRQs, with a configurable number of outputs. (This is in some ways the inverse of the TYPE_OR_IRQ device.) Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-13-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
The function qdev_init_gpio_in_named() passes the DeviceState pointer as the opaque data pointor for the irq handler function. Usually this is what you want, but in some cases it would be helpful to use some other data pointer. Add a new function qdev_init_gpio_in_named_with_opaque() which allows the caller to specify the data pointer they want. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-12-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
The or-irq.h header file is missing the customary guard against multiple inclusion, which means compilation fails if it gets included twice. Fix the omission. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-11-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
Move the definition of the struct for the unimplemented-device from unimp.c to unimp.h, so that users can embed the struct in their own device structs if they prefer. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-10-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
Add a Cortex-M33 definition. The M33 is an M profile CPU which implements the ARM v8M architecture, including the M profile Security Extension. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-9-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
Create an "init-svtor" property on the armv7m container object which we can forward to the CPU object. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-8-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
The Cortex-M33 allows the system to specify the reset value of the secure Vector Table Offset Register (VTOR) by asserting config signals. In particular, guest images for the MPS2 AN505 board rely on the MPS2's initial VTOR being correct for that board. Implement a QEMU property so board and SoC code can set the reset value to the correct value. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-7-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
Create an "idau" property on the armv7m container object which we can forward to the CPU object. Annoyingly, we can't use object_property_add_alias() because the CPU object we want to forward to doesn't exist until the armv7m container is realized. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-6-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
In v8M, the Implementation Defined Attribution Unit (IDAU) is a small piece of hardware typically implemented in the SoC which provides board or SoC specific security attribution information for each address that the CPU performs MPU/SAU checks on. For QEMU, we model this with a QOM interface which is implemented by the board or SoC object and connected to the CPU using a link property. This commit defines the new interface class, adds the link property to the CPU object, and makes the SAU checking code call the IDAU interface if one is present. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-5-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
Instead of loading guest images to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-4-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
Instead of loading kernels, device trees, and the like to the system address space, use the CPU's address space. This is important if we're trying to load the file to memory or via an alias memory region that is provided by an SoC object and thus not mapped into the system address space. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-3-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
Add a function load_ramdisk_as() which behaves like the existing load_ramdisk() but allows the caller to specify the AddressSpace to use. This matches the pattern we have already for various other loader functions. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-2-peter.maydell@linaro.org
-
由 Richard Henderson 提交于
Allow the translate subroutines to return false for invalid insns. At present we can of course invoke an invalid insn exception from within the translate subroutine, but in the short term this consolidates code. In the long term it would allow the decodetree language to support overlapping patterns for ISA extensions. Signed-off-by: NRichard Henderson <richard.henderson@linaro.org> Message-id: 20180227232618.2908-1-richard.henderson@linaro.org Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alistair Francis 提交于
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alistair Francis 提交于
Allow the guest to determine the time set from the QEMU command line. This includes adding a trace event to debug the new time. Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alistair Francis 提交于
Initial commit of the ZynqMP RTC device. Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
virtio,vhost,pci,pc: features, fixes and cleanups - documentation updates - vhost fixes - new crypto vhost device Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 01 Mar 2018 16:27:25 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: cryptodev-vhost-user: set the key length cryptodev-vhost-user: add crypto session handler cryptodev: add vhost support cryptodev: add vhost-user as a new cryptodev backend docs/vmcoreinfo: detail unsupported host format behaviour vhost: fix incorrect check in vhost_verify_ring_mappings vhost: avoid to start/stop virtqueue which is not ready vhost: fix memslot limit check docs: pcie: Spell out machine type needs for PCIe features docs: document virtio-balloon stats intel-iommu: Accept 64-bit writes to FEADDR virtio-pci: trivial fixes in error message vhost-user: fix memory leak Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
- add query-cpus-fast and deprecate query-cpus, while adding s390 cpu information - remove s390x memory hotplug implementation, which is not useable in this form - add boot menu support in the s390-ccw bios - expose s390x guest crash information - fixes and cleaups # gpg: Signature made Thu 01 Mar 2018 12:54:47 GMT # gpg: using RSA key DECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # gpg: aka "Cornelia Huck <cohuck@kernel.org>" # gpg: aka "Cornelia Huck <cohuck@redhat.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20180301-v2: (27 commits) s390x/tcg: fix loading 31bit PSWs with the highest bit set s390x: remove s390_get_memslot_count s390x/sclp: remove memory hotplug support s390x/cpumodel: document S390FeatDef.bit not applicable hmp: change hmp_info_cpus to use query-cpus-fast qemu-doc: deprecate query-cpus qmp: add architecture specific cpu data for query-cpus-fast qmp: add query-cpus-fast qmp: expose s390-specific CPU info s390x/tcg: add various alignment checks s390x/tcg: fix disabling/enabling DAT s390/stattrib: Make SaveVMHandlers data static s390x/cpu: expose the guest crash information pc-bios/s390: Rebuild the s390x firmware images with the boot menu changes s390-ccw: interactive boot menu for scsi s390-ccw: use zipl values when no boot menu options are present s390-ccw: set cp_receive mask only when needed and consume pending service irqs s390-ccw: read user input for boot index via the SCLP console s390-ccw: print zipl boot menu s390-ccw: read stage2 boot loader data to find menu ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Gonglei 提交于
Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gonglei 提交于
Introduce two vhost-user meassges: VHOST_USER_CREATE_CRYPTO_SESSION and VHOST_USER_CLOSE_CRYPTO_SESSION. At this point, the QEMU side support crypto operation in cryptodev host-user backend. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com> Signed-off-by: NJay Zhou <jianjay.zhou@huawei.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gonglei 提交于
Impliment the vhost-crypto's funtions, such as startup, stop and notification etc. Introduce an enum QCryptoCryptoDevBackendOptionsType in order to identify the cryptodev vhost backend is vhost-user or vhost-kernel-module (If exist). At this point, the cryptdoev-vhost-user works. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com> Signed-off-by: NJay Zhou <jianjay.zhou@huawei.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gonglei 提交于
Usage: -chardev socket,id=charcrypto0,path=/path/to/your/socket -object cryptodev-vhost-user,id=cryptodev0,chardev=charcrypto0 -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 Signed-off-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com> Signed-off-by: NJay Zhou <jianjay.zhou@huawei.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Marc-André Lureau 提交于
Suggested-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jia He 提交于
In commit 0ca1fd2d ("vhost: Simplify ring verification checks"), it checks the virtqueue desc mapping for 3 times. Fixed: commit 0ca1fd2d ("vhost: Simplify ring verification checks") Signed-off-by: NJia He <jia.he@hxt-semitech.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Jia He 提交于
In our Armv8a server, we try to configure the vhost scsi but fail to boot up the guest (-machine virt-2.10). The guest's boot failure is very early, even earlier than grub. There are 3 virtqueues (ctrl, event and cmd) for virtio scsi device, but ovmf and seabios will only set the physical address for the 3rd one (cmd). Then in vhost_virtqueue_start(), virtio_queue_get_desc_addr will be 0 for ctrl and event vq when qemu negotiates with ovmf. So vhost_memory_map fails with ENOMEM. This patch just fixs it by early quitting the virtqueue start/stop when virtio_queue_get_desc_addr is 0. Btw, after guest kernel starts, all the 3 queues will be initialized and set address correctly. Already tested on Arm64 and X86_64 qemu. Signed-off-by: NJia He <jia.he@hxt-semitech.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 01 3月, 2018 11 次提交
-
-
由 Peter Maydell 提交于
target-arm queue: * update MAINTAINERS for Alistair's new email address * add Arm v8.2 FP16 arithmetic extension for linux-user * implement display connector emulation for vexpress board * xilinx_spips: Enable only two slaves when reading/writing with stripe * xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands * hw: register: Run post_write hook on reset # gpg: Signature made Thu 01 Mar 2018 11:22:46 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180301: (42 commits) MAINTAINERS: Update my email address linux-user: Report AArch64 FP16 support via hwcap bits target/arm: Enable ARM_V8_FP16 feature bit for the AArch64 "any" CPU arm/translate-a64: add all single op FP16 to handle_fp_1src_half arm/translate-a64: implement simd_scalar_three_reg_same_fp16 arm/translate-a64: add all FP16 ops in simd_scalar_pairwise arm/translate-a64: add FP16 FMOV to simd_mod_imm arm/translate-a64: add FP16 FRSQRTE to simd_two_reg_misc_fp16 arm/helper.c: re-factor rsqrte and add rsqrte_f16 arm/translate-a64: add FP16 FSQRT to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FRCPX to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FRECPE arm/helper.c: re-factor recpe and add recepe_f16 arm/translate-a64: add FP16 FNEG/FABS to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 SCVTF/UCVFT to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FCMxx (zero) to simd_two_reg_misc_fp16 arm/translate-a64: add FCVTxx to simd_two_reg_misc_fp16 arm/translate-a64: add FP16 FPRINTx to simd_two_reg_misc_fp16 arm/translate-a64: initial decode for simd_two_reg_misc_fp16 arm/translate-a64: add FP16 x2 ops for simd_indexed ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Jay Zhou 提交于
Since used_memslots will be updated to the actual value after registering memory listener for the first time, move the memslots limit checking to the right place. Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NJay Zhou <jianjay.zhou@huawei.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Kashyap Chamarthy 提交于
PCIe features are available only via the 'q35' machine type for x86 and the 'virt' machine type for AArch64 architecture. Mention that explicitly. Thanks: Daniel Berrangé Signed-off-by: NKashyap Chamarthy <kchamart@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Tomáš Golembiovský 提交于
Document statistics added in commits commit a0d06486 Author: Denis V. Lunev <den@openvz.org> Date: Wed Feb 24 10:50:48 2016 +0300 virtio-balloon: add 'available' counter and commit bf1e7140 Author: Tomáš Golembiovský <tgolembi@redhat.com> Date: Tue Dec 5 13:14:46 2017 +0100 virtio-balloon: include statistics of disk/file caches Signed-off-by: NTomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: NJonathan Helman <jonathan.helman@oracle.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jan Kiszka 提交于
Xen is doing this [1] and currently triggers an abort. [1] http://xenbits.xenproject.org/gitweb/?p=xen.git;a=blob;f=xen/drivers/passthrough/vtd/iommu.c;h=daaed0abbdd06b6ba3d948ea103aadf02651e83c;hb=refs/heads/master#l1108Reported-by: NLuis Lloret <luis_lloret@mentor.com> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Greg Kurz 提交于
Signed-off-by: NGreg Kurz <groug@kaod.org> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 linzhecheng 提交于
g_free() was moved from vhost_net_cleanup in commit e6bcb1b6, so we should free net after vhost_net_cleanup Signed-off-by: Nlinzhecheng <linzhecheng@huawei.com> Reviewed-by: Marc-André Lureau < marcandre.lureau@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
-
由 Peter Maydell 提交于
Block patches 2018-03-01 Coverity fixes for nvme:// # gpg: Signature made Thu 01 Mar 2018 07:24:24 GMT # gpg: using RSA key CA35624C6A9171C6 # gpg: Good signature from "Fam Zheng <famz@redhat.com>" # Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6 * remotes/famz/tags/staging-pull-request: block/nvme: fix Coverity reports Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 David Hildenbrand 提交于
Let's also put the 31-bit hack in front of the REAL MMU, otherwise right now we get errors when loading a PSW where the highest bit is set (e.g. via s390-netboot.img). The highest bit is not masked away, therefore we inject addressing exceptions into the guest. The proper fix will later be to do all address wrapping before accessing the MMU - so we won't get any "wrong" entries in there (which makes flushing also easier). But that will require more work (wrapping in load_psw, wrapping when incrementing the PC, wrapping every memory access). This fixes the tests/pxe-test test. Signed-off-by: NDavid Hildenbrand <david@redhat.com> Message-Id: <20180301120826.6847-1-david@redhat.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Peter Maydell 提交于
qemu-sparc update # gpg: Signature made Tue 27 Feb 2018 19:03:28 GMT # gpg: using RSA key 5BC2C56FAE0F321F # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-sparc-signed: loader: don't perform overlapping address check for memory region ROM images Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alistair Francis 提交于
I am leaving Xilinx, so to avoid having an email address that bounces update my maintainer address to point to my personal email address. Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com> Signed-off-by: NAlistair Francis <alistair@alistair23.me> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 7bb690382e3370aa1c1e047a84e36603c787ec0e.1519749987.git.alistair.francis@xilinx.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-