Implement them like KVM implements/handles them. Both can only be
triggered via SIGP instructions. RESET has (almost) the lowest priority if
the CPU is running, and the highest if the CPU is STOPPED. This is handled
in SIGP code already. On delivery, we only have to care about the
"CPU running" scenario.

STOP is defined to be delivered after all other interrupts have been
delivered. Therefore it has the actual lowest priority.

As both can wake up a CPU if sleeping, indicate them correctly to
external code (e.g. cpu_has_work()).
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-25-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Mostly analogous to the kernel/KVM version (so I assume the checks are
correct :) ). As a preparation for TCG.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-24-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

As preparation for TCG.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-23-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

As preparation for TCG.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-22-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Add it as preparation for TCG. Sensing could later be done completely
lockless.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-21-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Preparation for TCG, for KVM is this is completely handled in the
kernel.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-20-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

For KVM, the KVM module decides when a STOP can be performed (when the
STOP interrupt can be processed). Factor it out so we can use it
later for TCG.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-19-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

We want to use the same code base for TCG, so let's cleanly factor it
out.

The sigp mutex is currently not really needed, as everything is
protected by the iothread mutex. But this could change later, so leave
it in place and initialize it properly from common code.
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-17-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Preparation for moving it out of kvm.c.
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-16-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Called from SIGP code to be factored out, so let's move it. Add a
FIXME for TCG code in the future.
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-15-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Factor it out into s390_store_status(), to be used also by TCG later on.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-14-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Preparation for factoring it out into !kvm code.
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-13-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

No need to pass kvm_run. Pass parameters alphabetically ordered.
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-12-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

KVM handles the wait PSW itself and triggers a WAIT ICPT in case it
really wants to sleep (disabled wait).

This will later allow us to change the order of loading a restart
interrupt and setting a CPU to OPERATING on SIGP RESTART without
changing KVM behavior.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-11-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

If we encounter a WAIT PSW, we have to halt immediately. Using
cpu_loop_exit() at this point feels wrong. Simply leaving
cs->exception_index set doesn't result in an immediate stop.

This is also necessary to properly handle SIGP STOP interrupts later.

The CPU_INTERRUPT_HALT will be processed immediately and properly set
the CPU to halted (also resetting cs->exception_index to EXCP_HLT)
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-10-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

This will now also detect crashes under TCG. We can directly use
cpu->env.psw.addr instead of kvm_run, as we do a cpu_synchronize_state().
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-9-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Going to OPERATING here looks wrong. A CPU should even never be
!OPERATING at this point. Unhalting will already be done in
cpu_handle_halt() if there is work, so we can drop this statement
completely.
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-8-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Interrupts can't wake such CPUs up. SIGP from other CPUs has to be used
to toggle the state.
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-7-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

We can now let go of INTERRUPT_EXT. When cr0 changes, we have to
revalidate if we now have a pending external interrupt, just like
when the PSW (or SYSTEM MASK only) changes.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-6-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Currently, enabling/disabling of interrupts is not really supported.

Let's improve interrupt handling code by explicitly checking for
deliverable interrupts only. This is the first step. Checking for
external interrupt subclasses will be done next.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-5-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Preparation for new TCG SIGP code. Especially also prepare for
indicating that another external call is already pending.

Take care of interrupt priority.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-4-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

There are still some leftovers from old virtio interrupts in there.
Most importantly, we don't have to queue service interrupts anymore.
Just like KVM, we can simply multiplex the SCLP service interrupts and
avoid the queue.

Also, now only valid parameters/cpu_addr will be stored on service
interrupts.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-3-david@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

External interrupts are currently all handled like floating external
interrupts, they are queued. Let's prepare for a split of floating
and local interrupts by turning INTERRUPT_EXT into a mask.

While we can have various floating external interrupts of one kind, there
is usually only one (or a fixed number) of the local external interrupts.

So turn INTERRUPT_EXT into a mask and properly indicate the kind of
external interrupt. Floating interrupts will have to moved out of
one CPU instance later once we have SMP support.

The only floating external interrupts used right now are SERVICE
interrupts, so let's use that name. Following patches will clean up
SERVICE interrupt injection.

This get's rid of the ugly special handling for cpu timer and clock
comparator interrupts. And we really only store the parameters as
defined by the PoP.
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-2-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Calling do_subchannel_work with no function control flags set in SCSW is
a programming error. Currently we handle this differently in
do_subchannel_work_virtual and do_subchannel_work_passthrough. Let's be
consistent and guard with a common assert against this programming error.
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171004154144.88995-2-pasic@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: more changes in hw/s390x/css.c, added target/s390x/cpu_models.c]
Message-Id: <20171006235023.11952-27-f4bug@amsat.org>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Merge tpm 2017/10/19 v1

# gpg: Signature made Thu 19 Oct 2017 16:42:39 BST
# gpg:                using RSA key 0x75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE  C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2017-10-19-1: (21 commits)
  tpm: move recv_data_callback to TPM interface
  tpm: add a QOM TPM interface
  tpm-tis: fold TPMTISEmuState in TPMState
  tpm-tis: remove tpm_tis.h header
  tpm-tis: move TPMState to TIS header
  tpm: remove locty_data from TPMState
  tpm-emulator: fix error handling
  tpm: add TPMBackendCmd to hold the request state
  tpm: remove locty argument from receive_cb
  tpm: remove needless cast
  tpm: remove unused TPMBackendCmd
  tpm: remove configure_tpm() hop
  tpm: remove init() class method
  tpm: remove TPMDriverOps
  tpm: move TPMSizedBuffer to tpm_tis.h
  tpm: remove tpm_register_driver()
  tpm: replace tpm_get_backend_driver() to drop be_drivers
  tpm: lookup tpm backend class in tpm_driver_find_by_type()
  tpm: make tpm_get_backend_driver() static
  tpm-tis: remove RAISE_STS_IRQ
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update OpenBIOS images

# gpg: Signature made Thu 19 Oct 2017 20:08:44 BST
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images to 83818bd built from submodule.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

qemu-sparc update

# gpg: Signature made Thu 19 Oct 2017 07:50:16 BST
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-signed:
  sun4u: fix assert when adding NICs which aren't the in-built model
  sun4u: update PCI topology to include simba PCI bridges
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/seabios-1.11-prerelease-20171019-pull-request' into staging

seabios: update to 1.11 prerelease

# gpg: Signature made Thu 19 Oct 2017 09:19:33 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/seabios-1.11-prerelease-20171019-pull-request:
  seabios: update to 1.11 prerelease
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This was introduced by:
    commit aef45d51
    Author: Daniel P. Berrange <berrange@redhat.com>
    Date:   Fri Sep 29 11:11:56 2017 +0100

	build: automatically handle GIT submodule checkout for dtc

On my system, I see the following with a fresh clone:

% ./configure --disable-gtk --target-list=aarch64-softmmu
% make -j8
  GEN     aarch64-softmmu/config-devices.mak.tmp
  GEN     config-host.h
mkdir -p dtc/libfdt
  GIT     ui/keycodemapdb dtc
mkdir -p dtc/tests
  GEN     qemu-options.def
[snip]
  GEN     migration/trace.h
make: *** [git-submodule-update] Error 1
make: *** Waiting for unfinished jobs....

Upon closer inspection, the root cause of the error is:

% git submodule update --init ui/keycodemapdb dtc
fatal: destination path 'dtc' already exists and is not an empty directory.
Clone of 'git://git.qemu-project.org/dtc.git' into submodule path 'dtc' failed

This patch fixes this race condition by forcing the 'dtc/%' rule which caused
'dtc' to be non-empty to wait on '.git-submodule-status'.
Signed-off-by: NAaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Acked-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1508352023-28591-1-git-send-email-alindsay@codeaurora.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Simplify the TPM backend setup, move callback to TPM interface.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This will simplify backend / interface objects relationship, so the
frontend interface will simply have to implement the TPM QOM interface.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

The definitions are now private to TIS implementation.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Keep it internal to tpm-tis instead.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

The previous patch cleaned up a bit error handling, and exposed an
existing bug: error_report_err() could be called with a NULL error.
Instead, make tpm_emulator_set_locality() set the error.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This simplifies a bit locality handling, and argument passing, and
could pave the way to queuing requests (if that makes sense).
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

The tpm_state is passed as argument, the assert() is pointless since
we give it the value of tpm_state->locty_number already.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>