This should fix compilation problem in case of CONFIG_USER_ONLY.

Currently INIT/SIPI is handled in the context of CPU that sends IPI.
This patch changes this to handle them like all other events in a main
cpu exec loop. When KVM will gain thread per vcpu capability it will
be much more clear to handle those event by cpu thread itself and not
modify one cpu's state from the context of the other.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To reset internal irq handling data structures.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NYaniv Kamay <ykamay@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Support a new feature flag for indirect ring entries. These are ring
entries which point to a table of buffer descriptors.

The idea here is to increase the ring capacity by allowing a larger
effective ring size whereby the ring size dictates the number of
requests that may be outstanding, rather than the size of those
requests.

This should be most effective in the case of block I/O where we can
potentially benefit by concurrently dispatching a large number of
large requests. Even in the simple case of single segment block
requests, this results in a threefold increase in ring capacity.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Change the vring descriptor helpers to take the physical
address of the descriptor table rather than a virtqueue.

This is needed in order to allow these helpers to be used
with an indirect descriptor table.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fix the pcap dumps on Win32 and other systems where O_BINARY is required.
Signed-off-by: NFilip Navara <filip.navara@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The code how it is today, is totally painful to read and keep.
To begin with, the code is duplicated with the option rom loading
code that linux_boot and vga are already using.

This patch introduces a "bootable" state in NICInfo structure,
that we can use to keep track of whether or not a given nic should
be bootable, avoiding the introduction of yet another global state.

With that in hands, we move the code in vl.c to hw/pc.c, and use
the already existing infra structure to load those option roms.

Error checking code suggested by Mark McLoughlin
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This eliminates the results unused warnings.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

uninitialized

On Tue, Jun 16, 2009 at 08:19:23PM -0500, Anthony Liguori wrote:
> malc wrote:
>>
>> On my system the above line causes gcc to emit:
>>
>> In file included from /home/malc/x/rcs/git/qemu/linux-user/strace.c:12:
>> /usr/include/linux/futex.h:48: error: field `__user' has incomplete type
>> /usr/include/linux/futex.h:48: error: syntax error before '*' token
>> /usr/include/linux/futex.h:63: error: field `list' has incomplete type
>> /usr/include/linux/futex.h:83: error: field `__user' has incomplete type
>> /usr/include/linux/futex.h:83: error: syntax error before '*' token
>> make[1]: *** [strace.o] Error 1

> We had the same problem with usb-linux.c.  It's broken system headers,
> the __user stuff is supposed to get removed as part of the headers
> installation.

> It builds fine on my system (Fedora 10).

Howabout something like this:

commit eb8387cb0eda32a18880664eb5f0ca5c8bf05b45
Author: Riku Voipio <riku.voipio@iki.fi>
Date:   Thu Jun 18 22:44:31 2009 +0300
Subject: linux-user: include futex defines directly

Since some common distributions have broken linux/futex.h, stop
including it. Instead add the defines directly.
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Also zero pci_irq_levels on reset to avoid stuck irq after reset.

Based on 15a1956a by Gleb Natapov.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Also zero pci_irq_levels on reset to avoid stuck irq after reset.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NYaniv Kamay <ykamay@redhat.com>

The device is not reset on system reset currently.
Without this patch RHEL4.8 hangs after reboot if -usbdevice table
is in use.
Signed-off-by: NGleb Natapov <gleb@redhat.com>

This reverts commit 3dcd219f.

It is incorrect to call qemu_irq functions (or any other functions that
access other device state) during savevm/loadvm.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

remove unnecessary #if NB_MMU_MODES by using loop.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

vga_screen_dump_blank() was not generating a valid PPM file: the width of the
image made no sense (why it was multiplied by sizeof(uint32_t)?), and there was
only one sample per pixel, instead of three.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Section 10.8.25 ("START/STOP UNIT Command") of SFF-8020i states that
if the device is locked we should refuse to eject if the device is
locked.

ASC_MEDIA_REMOVAL_PREVENTED is the appropriate return in this case.

In order to stop itself from ejecting the media it is running from,
Fedora's installer (anaconda) requires the CDROMEJECT ioctl() to fail
if the drive has been previously locked.

See also https://bugzilla.redhat.com/501412Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

provide a monitor command to allow one to set the maximum
downtime he is willing to suffer during migration, in seconds.
"ms", "us", "ns" and "s" are accepted as modifiers.

This parameter will be used by ram_save_live() code to determine
a safe moment to enter stage 3
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently, we're entering migration's stage 3 when
a treshold of 10 pages remain to be transferred in the system.

This has hurt some users. However, any proposed threshold is
arbitrary by nature, and would only shift the annoyance.

The proposal of this patch is to define a max_downtime variable,
which represents the maximum downtime a migration user is willing
to suffer. Then, based on the bandwidth of last iteration, we
calculate how much data we can transfer in such a window of time.

Whenever we reach that value (or lower), we know is safe to enter
stage3.

This has largely improved the situation for me.
On localhost migrations, where one would expect things to go as
quickly as me running away from the duty of writting software for
windows, a kernel compile was enough to get the migration stuck.

It takes 20 ~ 30 iterations now.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

User space may only inject interrupts during kvm_arch_pre_run if
ready_for_interrupt_injection is set in kvm_run. But that field is
updated on exit from KVM_RUN, so we must ensure that we enter the
kernel after potentially queuing an interrupt, otherwise we risk to
loose one - like it happens with the current code against latest
kernel modules (since kvm-86) that started to queue only a single
interrupt.

Fix the problem by reordering kvm_cpu_exec.

Credits go to Gleb Natapov for analyzing the issue in details.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Also replave qemu_bh_cancel with qemu_bh_delete in bdrv_aio_cancel_em.
 Otherwise the bh will live forever in the bh list.
Signed-off-by: NDor Laor <dor@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

vl.c contains some dead code that initialises a 'label' string with the name
of the char device being initialised. This is unused.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As per the IA32 processor manual, the accessed bit is set to 1 in the
processor state after reset. qemu pc cpu_reset code was missing this
accessed bit setting.
Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

KVM-enabled QEMU will always report the vendor ID of the physical CPU it is
running on. Allow to override this if explicitly requested on the
command line. It will not suffice to name a CPU type (like -cpu phenom),
but you have to explicitly set the vendor: -cpu phenom,vendor=AuthenticAMD
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The new option is --enable-debug, not --disable-debug.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There are some people interested in, given a cpu number,
pick its CPUState. KVM is an example, although not yet in tree.
This patch provides a way of doing that.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reorganize qemu console emulation code.  Make it look at the numlock
state and interpret numpad keys as arrow+friends (numlock off) or
digits (numlock on).  While being at it also wind up the other numpad
keys.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>