Hopefully we'll see the same benefits as the other builds.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

Workaround for issues when the host has no IPv6 connectivity.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Message-Id: <20191018181705.17957-4-ehabkost@redhat.com>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>

The mechanism will be used to work around issues related to IPv6
on the netbsd image builder.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018181705.17957-3-ehabkost@redhat.com>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>

CirrusCI provides a mojave-xcode alias for the latest Xcode available.
Let's use it to make sure we track the latest releases.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>

According to:

  https://docs.travis-ci.com/user/reference/osx/#macos-version

we have 10.3 available so lets use it. I don't know what Apple's
deprecation policy is for Xcode because it requires an AppleID to find
out.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

Add a job to generate the release tarball and build/install few
QEMU targets from it.

Ideally we should build the 'efi' target from the 'roms' directory,
but it is too time consuming.

This job is only triggered when a tag starting with 'v' is pushed,
which is the case with release candidate tags.
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191007160450.3619-1-philmd@redhat.com>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>

The "command -v ccache && ccache ..." likely were supposed to test
the availability of ccache before running the program. But this
shell construct causes Travis to abort if ccache is not available.
Use an if-statement instead to fix this problem.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191009170701.14756-5-thuth@redhat.com>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>

libgnutls-dev and libpng12-dev are not available in newer versions
of Ubuntu anymore, so installing these packages fails e.g. in the
new arm64 containers on Travis. Let's use newer versions of these
packages by default instead. (The old versions still get tested in
the "gcc-9" build).
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-4-thuth@redhat.com>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>

We've removed support for SDL 1.2 quite a while ago already, so let's
use SDL 2 now in Travis to get test coverage for SDL again.
And while we're at it, also add libsdl2-image-dev which can be used
by QEMU nowadays, too.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-3-thuth@redhat.com>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>

This library is needed to compile the VDE network backend.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <20191009170701.14756-2-thuth@redhat.com>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

Adding debug makes things run a bit slower so lets not hammer all the
targets.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

Block layer patches:

- qcow2: Fix data corruption bug that is triggered in partial cluster
  allocation with default options
- qapi: add support for blkreplay driver
- doc: Describe missing generic -blockdev options
- iotests: Fix 118 when run as root
- Minor code cleanups

# gpg: Signature made Fri 25 Oct 2019 14:19:04 BST
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  qcow2: Fix corruption bug in qcow2_detect_metadata_preallocation()
  coroutine: Add qemu_co_mutex_assert_locked()
  doc: Describe missing generic -blockdev options
  block/backup: drop dead code from backup_job_create
  blockdev: Use error_report() in hmp_commit()
  iotests: Skip read-only cases in 118 when run as root
  qapi: add support for blkreplay driver
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

qcow2_detect_metadata_preallocation() calls qcow2_get_refcount() which
requires s->lock to be taken to protect its accesses to the refcount
table and refcount blocks. However, nothing in this code path actually
took the lock. This could cause the same cache entry to be used by two
requests at the same time, for different tables at different offsets,
resulting in image corruption.

As it would be preferable to base the detection on consistent data (even
though it's just heuristics), let's take the lock not only around the
qcow2_get_refcount() calls, but around the whole function.

This patch takes the lock in qcow2_co_block_status() earlier and asserts
in qcow2_detect_metadata_preallocation() that we hold the lock.

Fixes: 69f47505
Cc: qemu-stable@nongnu.org
Reported-by: NMichael Weiser <michael.weiser@gmx.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Tested-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Some functions require that the caller holds a certain CoMutex for them
to operate correctly. Add a function so that they can assert the lock is
really held.

Cc: qemu-stable@nongnu.org
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Tested-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Fix typos and docs, trivial changes and RTC devices split

# gpg: Signature made Fri 25 Oct 2019 09:35:02 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  hw/rtc/aspeed_rtc: Remove unused includes
  hw/rtc/xlnx-zynqmp-rtc: Remove unused "ptimer.h" include
  hw/rtc/mc146818: Include mc146818rtc_regs.h a bit less
  hw: Move Aspeed RTC from hw/timer/ to hw/rtc/ subdirectory
  hw: Move Exynos4210 RTC from hw/timer/ to hw/rtc/ subdirectory
  hw: Move Xilinx ZynqMP RTC from hw/timer/ to hw/rtc/ subdirectory
  hw: Move DS1338 device from hw/timer/ to hw/rtc/ subdirectory
  hw: Move TWL92230 device from hw/timer/ to hw/rtc/ subdirectory
  hw: Move sun4v hypervisor RTC from hw/timer/ to hw/rtc/ subdirectory
  hw: Move M41T80 device from hw/timer/ to hw/rtc/ subdirectory
  hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectory
  hw: Move MC146818 device from hw/timer/ to hw/rtc/ subdirectory
  hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory
  hw/timer: Compile devices not target-dependent as common object
  qemu-timer: reuse MIN macro in qemu_timeout_ns_to_ms
  event_notifier: avoid dandling file descriptor in event_notifier_cleanup
  util/async: avoid useless cast
  pci_bridge: fix a typo in comment
  qemu-options.hx: Update for reboot-timeout parameter
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/timer/trace-events

We added more generic options after introducing -blockdev and forgot to
update the documentation (man page and --help output) accordingly. Do
that now.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>

After commit 00e30f05, there is no more "goto error" points
after job creation, so after "error:" @job is always NULL and we don't
need roll-back job creation.

Reported-by: Coverity (CID 1406402)
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Instead of using monitor_printf() to report errors, hmp_commit() should
use error_report() like other places do.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

Some tests in 118 use chmod to remove write permissions from the file
and assume that the image can indeed not be opened read-write
afterwards. This doesn't work when the test is run as root, because root
can still open the file as writable even when the permission bit isn't
set.

Introduce a @skip_if_root decorator and use it in 118 to skip the tests
in question when the script is run as root.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

This patch adds support for blkreplay driver to the blockdev options.
Now blkreplay can be used with -blockdev command line option
in the following format:
-blockdev driver=blkreplay,image=file-node-name,node-name=replay-node-name

This option makes possible implementation of the better command
line support for record/replay invocations.
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

target-arm queue:
 * raspi boards: some cleanup
 * raspi: implement the bcm2835 system timer device
 * raspi: implement a dummy thermal sensor
 * misc devices: switch to ptimer transaction API
 * cache TB flag state to improve performance of cpu_get_tb_cpu_state
 * aspeed: Add an AST2600 eval board

# gpg: Signature made Fri 25 Oct 2019 13:11:25 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20191025: (42 commits)
  hw/arm/highbank: Use AddressSpace when using write_secondary_boot()
  hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_boot
  hw/arm/bcm2836: Rename cpus[] as cpu[].core
  hw/arm/bcm2836: Make the SoC code modular
  hw/arm/bcm2835_peripherals: Use the SYS_timer
  hw/timer/bcm2835: Add the BCM2835 SYS_timer
  hw/arm/bcm2835_peripherals: Use the thermal sensor block
  hw/misc/bcm2835_thermal: Add a dummy BCM2835 thermal sensor
  hw/watchdog/milkymist-sysctl.c: Switch to transaction-based ptimer API
  hw/m68k/mcf5206.c: Switch to transaction-based ptimer API
  hw/timer/grlib_gptimer.c: Switch to transaction-based ptimer API
  hw/timer/slavio_timer.c: Switch to transaction-based ptimer API
  hw/timer/slavio_timer: Remove useless check for NULL t->timer
  hw/dma/xilinx_axidma.c: Switch to transaction-based ptimer API
  hw/timer/xilinx_timer.c: Switch to transaction-based ptimer API
  hw/net/fsl_etsec/etsec.c: Switch to transaction-based ptimer API
  target/arm: Rely on hflags correct in cpu_get_tb_cpu_state
  linux-user/arm: Rebuild hflags for TARGET_WORDS_BIGENDIAN
  linux-user/aarch64: Rebuild hflags for TARGET_WORDS_BIGENDIAN
  target/arm: Rebuild hflags for M-profile NVIC
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

write_secondary_boot() is used in SMP configurations where the
CPU address space might not be the main System Bus.
The rom_add_blob_fixed_as() function allow us to specify an
address space. Use it to write each boot blob in the corresponding
CPU address space.
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-15-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

write_secondary_boot() is used in SMP configurations where the
CPU address space might not be the main System Bus.
The rom_add_blob_fixed_as() function allow us to specify an
address space. Use it to write each boot blob in the corresponding
CPU address space.
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-11-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As we are going to add more core-specific fields, add a 'cpu'
structure and move the ARMCPU field there as 'core'.
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-7-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This file creates the BCM2836/BCM2837 blocks.
The biggest differences with the BCM2838 we are going to add, are
the base addresses of the interrupt controller and the peripherals.
Add these addresses in the BCM283XInfo structure to make this
block more modular. Remove the MCORE_OFFSET offset as it is
not useful and rather confusing.
Reviewed-by: NEsteban Bosse <estebanbosse@gmail.com>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-6-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Connect the recently added SYS_timer.
Now U-Boot does not hang anymore polling a free running counter
stuck at 0.
This timer is also used by the Linux kernel thermal subsystem.
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191019234715.25750-5-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add the 64-bit free running timer. Do not model the COMPARE register
(no IRQ generated).
This timer is used by Linux kernel and recently U-Boot:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clocksource/bcm2835_timer.c?h=v3.7
https://github.com/u-boot/u-boot/blob/v2019.07/include/configs/rpi.h#L19

Datasheet used:
https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdfSigned-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-4-f4bug@amsat.org
[PMM: squashed in switch to using memset in reset]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Map the thermal sensor in the BCM2835 block.
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191019234715.25750-3-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We will soon implement the SYS_timer. This timer is used by Linux
in the thermal subsystem, so once available, the subsystem will be
enabled and poll the temperature sensors. We need to provide the
minimum required to keep Linux booting.

Add a dummy thermal sensor returning ~25°C based on:
https://github.com/raspberrypi/linux/blob/rpi-5.3.y/drivers/thermal/broadcom/bcm2835_thermal.cSigned-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-2-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Switch the milkymist-sysctl code away from bottom-half based
ptimers to the new transaction-based ptimer API.  This just requires
adding begin/commit calls around the various places that modify the
ptimer state, and using the new ptimer_init() function to create the
timer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191021141040.11007-1-peter.maydell@linaro.org

Switch the mcf5206 code away from bottom-half based ptimers to
the new transaction-based ptimer API.  This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Message-id: 20191021140600.10725-1-peter.maydell@linaro.org

Switch the grlib_gptimer code away from bottom-half based ptimers to
the new transaction-based ptimer API.  This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191021134357.14266-3-peter.maydell@linaro.org
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Switch the slavio_timer code away from bottom-half based ptimers to
the new transaction-based ptimer API.  This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20191021134357.14266-4-peter.maydell@linaro.org
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The system <stdint.h> include is already provided by "osdep.h"
(the scripts/clean-includes file clean such headers).

Commit 64552b6b suggests we don't need to include "hw/irq.h":

    Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
    qemu/typedefs.h, and then include hw/irq.h only where it's still
    needed.
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <20191003230404.19384-15-philmd@redhat.com>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

The "hw/ptimer.h" header is not used, remove it.
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <20191003230404.19384-14-philmd@redhat.com>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Only 2 source files require the "mc146818rtc_regs.h" header.
Instead of having it processed 12 times, by all objects
using "mc146818rtc.h", include it directly where used.
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-13-philmd@redhat.com>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Move RTC devices under the hw/rtc/ subdirectory.
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <20191003230404.19384-12-philmd@redhat.com>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Move RTC devices under the hw/rtc/ subdirectory.
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <20191003230404.19384-11-philmd@redhat.com>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Move RTC devices under the hw/rtc/ subdirectory.

Remove Alistair outdated email address (see commit c22e580c).
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <20191003230404.19384-10-philmd@redhat.com>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

The DS1338 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <20191003230404.19384-9-philmd@redhat.com>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>