Mode switches from Hyp to any other mode via the CPS and MRS
instructions are illegal mode switches (though obviously switching
via exception return is valid).  Add this check to bad_mode_switch().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-11-git-send-email-peter.maydell@linaro.org

In v8, the illegal mode changes which are UNPREDICTABLE in v7 are
given architected behaviour:
 * the mode field is unchanged
 * PSTATE.IL is set (so any subsequent instructions will UNDEF)
 * any other CPSR fields are written to as normal

This is pretty much the same behaviour we picked for our
UNPREDICTABLE handling, with the exception that for v8 we
need to set the IL bit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-10-git-send-email-peter.maydell@linaro.org

In v8 trying to switch mode to Mon from Secure EL1 is an
illegal mode switch. (In v7 this is impossible as all secure
modes except User are at EL3.) We can handle this case by
making a switch to Mon valid only if the current EL is 3,
which then gives the correct answer whether EL3 is AArch32
or AArch64.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-9-git-send-email-peter.maydell@linaro.org

We don't actually support Hyp mode yet, but add the correct
checks for it to the bad_mode_switch() function for completeness.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-8-git-send-email-peter.maydell@linaro.org

QEMU doesn't implement the NSACR.RFR bit, which is a permitted
IMPDEF in choice in ARMv7 and the only permitted choice in ARMv8.
Add a comment to bad_mode_switch() to note that this is why
FIQ is always a valid mode regardless of the CPU's Secure state.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-7-git-send-email-peter.maydell@linaro.org

The only case where we can attempt a cpsr_write() mode switch from
User is from the gdbstub; all other cases are handled in the
calling code (notably translate.c). Architecturally attempts to
alter the mode bits from user mode are simply ignored (and not
treated as a bad mode switch, which in v8 sets CPSR.IL). Make
mode switches from User ignored in cpsr_write() as well, for
consistency.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-6-git-send-email-peter.maydell@linaro.org

When linux-user code is calling cpsr_write(), use a restrictive
mask to ensure we are limiting the set of CPSR bits we update.
In particular, don't allow the mode bits to be changed.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-5-git-send-email-peter.maydell@linaro.org

Raw CPSR writes should skip the architectural checks for whether
we're allowed to set the A or F bits and should also not do
the switching of register banks if the mode changes. Handle
this inside cpsr_write(), which allows us to drop the "manually
set the mode bits to avoid the bank switch" code from all the
callsites which are using CPSRWriteRaw.

This fixes a bug in 32-bit KVM handling where we had forgotten
the "manually set the mode bits" part and could thus potentially
trash the register state if the mode from the last exit to userspace
differed from the mode on this exit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-4-git-send-email-peter.maydell@linaro.org

Add an argument to cpsr_write() to indicate what kind of CPSR
write is being requested, since the exact behaviour should
differ for the different cases.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org

The rules for setting the CPSR on a 32-bit exception return are
subtly different from those for setting the CPSR via an instruction
like MSR or CPS. (In particular, in Hyp mode changing the mode bits
is not valid via MSR or CPS.) Split the exception-return case into
its own helper for setting CPSR, so we can eventually handle them
differently in the helper function.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-2-git-send-email-peter.maydell@linaro.org

MIPS patches 2016-02-26

Changes:
* support for FPU and MSA in KVM guest
* support for R6 Virtual Processors

# gpg: Signature made Fri 26 Feb 2016 11:07:37 GMT using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"

* remotes/lalrae/tags/mips-20160226:
  target-mips: implement R6 multi-threading
  mips/kvm: Support MSA in MIPS KVM guests
  mips/kvm: Support FPU in MIPS KVM guests
  mips/kvm: Support signed 64-bit KVM registers
  mips/kvm: Support unsigned KVM registers
  mips/kvm: Implement Config CP0 registers
  mips/kvm: Implement PRid CP0 register
  mips/kvm: Remove a couple of noisy DPRINTFs
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update OpenBIOS images

# gpg: Signature made Fri 26 Feb 2016 10:45:04 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"

* remotes/mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update OpenBIOS images to SVN r1391 built from submodule.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

MIPS Release 6 provides multi-threading features which replace
pre-R6 MT Module. CP0.Config3.MT is always 0 in R6, instead there is new
CP0.Config5.VP (Virtual Processor) bit which indicates presence of
multi-threading support which includes CP0.GlobalNumber register and
DVP/EVP instructions.
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Support the new KVM_CAP_MIPS_MSA capability, which allows MIPS SIMD
Architecture (MSA) to be exposed to the KVM guest.

The capability is enabled if the guest core has MSA according to its
Config3 register. Various config bits are now writeable so that KVM is
aware of the configuration (Config3.MSAP) and so that QEMU can
save/restore the guest modifiable bits (Config5.MSAEn). The MSACSR/MSAIR
registers and the MSA vector registers are now saved/restored. Since the
FP registers are a subset of the vector registers, they are omitted if
the guest has MSA.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Support the new KVM_CAP_MIPS_FPU capability, which allows the host's FPU
to be exposed to the KVM guest.

The capability is enabled if the guest core has an FPU according to its
Config1 register. Various config bits are now writeable so that KVM is
aware of the configuration (Config1.FP) and so that QEMU can
save/restore the guest modifiable bits (Config5.FRE, Config5.UFR,
Config5.UFE). The FCSR/FIR registers and the floating point registers
are now saved/restored (depending on the FR mode bit).
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Rename kvm_mips_{get,put}_one_reg64() to kvm_mips_{get,put}_one_ureg64()
since they take an int64_t pointer, and add separate signed 64-bit
accessors. These will be used for double precision floating point
registers.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Add KVM register access functions for the uint32_t type. This is
required for FP and MSA control registers, which are represented as
unsigned 32-bit integers.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Implement saving and restoring to KVM state of the Config CP0 registers
(namely Config, Config1, Config2, Config3, Config4, and Config5). These
control the features available to a guest, and a few of the fields will
soon be writeable by a guest so QEMU needs to know about them so as not
to clobber them on migration/savevm.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Implement saving and restoring to KVM state of the Processor ID (PRid)
CP0 register. This allows QEMU to control the PRid exposed to the guest
instead of using the default set by KVM.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

The DPRINTFs in cpu_mips_io_interrupts_pending() and kvm_arch_pre_run()
are particularly noisy during normal execution, and also not
particularly helpful. Remove them so that more important debug messages
can be more easily seen.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

qemu-ga patch queue for 2.6

* fix w32 build breakage when VSS enabled
* fix up wchar handling in guest-set-user-password
* fix re-install handling for w32 MSI installer
* add w32 support for guest-get-vcpus
* add support for enums in guest-file-seek SEEK params
  instead of relying on platform-specific integer values

# gpg: Signature made Thu 25 Feb 2016 16:59:13 GMT using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg:                 aka "Michael Roth <mdroth@utexas.edu>"
# gpg:                 aka "Michael Roth <mdroth@linux.vnet.ibm.com>"

* remotes/mdroth/tags/qga-pull-2016-02-25-tag:
  qga: fix w32 breakage due to missing osdep.h includes
  qga: check utf8-to-utf16 conversion
  qga: fix off-by-one length check
  qga: use wide-chars constants for wchar_t comparisons
  qga: use size_t for wcslen() return value
  qga: use more idiomatic qemu-style eol operators
  qga: implement the guest-get-vcpus for windows
  qemu-ga: Fixed minor version switch issue
  qga: Support enum names in guest-file-seek
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

requester.h relied on qemu/compiler.h definitions to
handle GCC_FMT_ATTR() stub, but this include was removed as part
of scripted clean-ups via 30456d5b:

  all: Clean up includes

under the assumption that all C files would have included it via
qemu/osdep.h at that point. requester.cpp was likely missed
due to C++ files requiring manual/special handling as well as
VSS build options needing to be enabled to trigger build failures.

Fix this by including qemu/osdep.h. That in turn pulls in a
macro from qapi/error.h that conflicts with a struct field name
in requester.h, so fix that as well by renaming the field.

While we're at it, fix up provider.cpp/install.cpp to include
osdep.h as well.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This fixes double-definitions in bsd-user builds when using the UST
tracing backend (which indirectly includes the system's "syscall.h").
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

UTF8 to UTF16 conversion can fail for genuine reasons, let's check errors.
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Laszlo Ersek said: "The length check is off by one (in the safe direction); it
should be (nchars >= 2). The processing should be active for the wide string
L"\r\n" -- resulting in the empty wide string --, I believe."
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Reported-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Reported-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Reported-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Signed-off-by: NGal Hammer <ghammer@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
* report rather than assert when VCPU count == 0
* fix up subject: s/set-vcpus/get-vcpus/
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

With automatically generated GUID, on minor version changes, an error
occurred, stating that there is a problem with the installer.
Now, a notification is shown, warning the user that another version of
this product is already installed, and that configuration or removal of
the existing version is possible through Add/Remove Programs on the
Control Panel (expected behavior).
Signed-off-by: NLeonid Bloch <leonid@daynix.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Magic constants are a pain to use, especially when we run the
risk that our choice of '1' for QGA_SEEK_CUR might differ from
the host or guest's choice of SEEK_CUR.  Better is to use an
enum value, via a qapi alternate type for back-compatibility.

With this,
 {"command":"guest-file-seek", "arguments":{"handle":1,
  "offset":0, "whence":"cur"}}
becomes a synonym for the older
 {"command":"guest-file-seek", "arguments":{"handle":1,
  "offset":0, "whence":1}}
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

* Asynchronous dump-guest-memory from Peter
* improved logging with -D -daemonize from Dimitris
* more address_space_* optimization from Gonglei
* TCG xsave/xrstor thinko fix
* chardev bugfix and documentation patch

# gpg: Signature made Thu 25 Feb 2016 15:12:27 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream:
  target-i386: fix confusion in xcr0 bit position vs. mask
  chardev: Properly initialize ChardevCommon components
  memory: Remove unreachable return statement
  memory: optimize qemu_get_ram_ptr and qemu_ram_ptr_length
  exec: store RAMBlock pointer into memory region
  log: Redirect stderr to logfile if deamonized
  dump-guest-memory: add qmp event DUMP_COMPLETED
  Dump: add hmp command "info dump"
  Dump: add qmp command "query-dump"
  DumpState: adding total_size and written_size fields
  dump-guest-memory: add "detach" support
  dump-guest-memory: disable dump when in INMIGRATE state
  dump-guest-memory: introduce dump_process() helper function.
  dump-guest-memory: add dump_in_progress() helper function
  dump-guest-memory: using static DumpState, add DumpStatus
  dump-guest-memory: add "detach" flag for QMP/HMP interfaces.
  dump-guest-memory: cleanup: removing dump_{error|cleanup}().
  scripts/kvm/kvm_stat: Fix missing right parantheses and ".format(...)"
  qemu-options.hx: Improve documentation of chardev multiplexing mode
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The xsave and xrstor helpers are accessing the x86_ext_save_areas array
using a bit mask instead of a bit position.  Provide two sets of XSTATE_*
definitions and use XSTATE_*_BIT when a bit position is requested.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Acked-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit d0d7708b forgot to parse logging for spice chardevs and
virtual consoles. This requires making qemu_chr_parse_common()
non-static. While at it, use a temporary variable to make the
code shorter, as well as reduce the churn when a later patch
alters the layout of simple unions.
Signed-off-by: NEric Blake <eblake@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455927587-28033-2-git-send-email-eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Message-Id: <1455935721-8804-4-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

these two functions consume too much cpu overhead to
find the RAMBlock by ram address.

After this patch, we can pass the RAMBlock pointer
to them so that they don't need to find the RAMBlock
anymore most of the time. We can get better performance
in address translation processing.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Message-Id: <1455935721-8804-3-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Each RAM memory region has a unique corresponding RAMBlock.
In the current realization, the memory region only stored
the ram_addr which means the offset of RAM address space,
We need to qurey the global ram.list to find the ram block
by ram_addr if we want to get the ram block, which is very
expensive.

Now, we store the RAMBlock pointer into memory region
structure. So, if we know the mr, we can easily get the
RAMBlock.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Message-Id: <1456130097-4208-2-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

TriCore bugfixes and synchronous trap implementation

# gpg: Signature made Thu 25 Feb 2016 11:57:41 GMT using RSA key ID 6B69CA14
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>"

* remotes/bkoppelmann/tags/pull-tricore-20160225:
  target-tricore: add opd trap generation
  target-tricore: add illegal opcode trap generation
  target-tricore: add context managment trap generation
  target-tricore: Add trap handling & SOVF/OVF traps
  target-tricore: Fix wrong precedences on psw_write
  target-tricore: fix save_context_upper using env->PSW
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vhost, virtio, pci, pc

Fixes all over the place.
virtio dataplane migration support.
Old q35 machine types removed.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 25 Feb 2016 11:16:46 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (21 commits)
  q35: No need to check gigabyte_align
  q35: Remove unused q35-acpi-dsdt.aml file
  ich9: Remove enable_tco arguments from init functions
  machine: Remove no_tco field
  q35: Remove old machine versions
  tests/vhost-user-bridge: fix build on 32 bit systems
  vring: remove
  virtio-scsi: do not use vring in dataplane
  virtio-blk: do not use vring in dataplane
  virtio-blk: fix "disabled data plane" mode
  virtio: export vring_notify as virtio_should_notify
  virtio: add AioContext-specific function for host notifiers
  vring: make vring_enable_notification return void
  block-migration: acquire AioContext as necessary
  pci core: function pci_bus_init() cleanup
  pci core: function pci_host_bus_register() cleanup
  balloon: Use only 'pc-dimm' type dimm for ballooning
  virtio-balloon: rewrite get_current_ram_size()
  move get_current_ram_size to virtio-balloon.c
  vhost-user: don't merge regions with different fds
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>