virtio 1.0 defines config space as LE,
as opposed to pre-1.0 which was native endian.

Add API for transports to execute word/dword accesses in
little endian format - will be useful for mmio
and pci (byte access is also wrapped, for completeness).

For simplicity, we still keep config in host native
endian format, byteswap to LE on guest access.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

This is somewhat functional.  With this, and linux driver from my tree,
I was able to use virtio net as virtio 1.0 device for light browsing.

At the moment, dataplane and vhost code is
still missing.

Based on Cornelia's virtio 1.0 patchset:
    Date: Thu, 11 Dec 2014 14:25:02 +0100
    From: Cornelia Huck <cornelia.huck@de.ibm.com>
    To: virtualization@lists.linux-foundation.org, qemu-devel@nongnu.org
    Cc: rusty@rustcorp.com.au, thuth@linux.vnet.ibm.com, mst@redhat.com,
    Cornelia Huck <cornelia.huck@de.ibm.com>
    Subject: [PATCH RFC v6 00/20] qemu: towards virtio-1 host support
    Message-Id: <1418304322-7546-1-git-send-email-cornelia.huck@de.ibm.com>

which is itself still missing some core bits.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Easier than duplicating code.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Make sure that all vhost interfaces use 64 bit features, as the virtio
core does, and make sure to use ULL everywhere possible to be on the
safe side.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Add VERSION_1 to list of features that we should
test at the backend.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

virtio-net (non-vhost) now should have everything in place to support
virtio 1.0: let's enable the feature bit for it.

Note that VIRTIO_F_VERSION_1 is technically a transport feature; once
every device is ready for virtio 1.0, we can move setting this
feature bit out of the individual devices.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

virtio-1 devices always use num_buffers in the header, even if
mergeable rx buffers have not been negotiated.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Devices operating as virtio 1.0 may not allow writes to the mac
address in config space.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

virtio-1 allow setting of the FEATURES_OK status bit to fail if
the negotiated feature bits are inconsistent: let's fail
virtio_set_status() in that case and update virtio-ccw to post an
error to the guest.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

For virtio-1 devices, the driver must not attempt to set feature bits
after it set FEATURES_OK in the device status. Simply reject it in
that case.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Handle endianness conversion for virtio-1 virtqueues correctly.

Note that dataplane now needs to be built per-target.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

For virtio-1 devices, we allow a more complex queue layout that doesn't
require descriptor table and rings on a physically-contigous memory area:
add virtio_queue_set_rings() to allow transports to set this up.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Add code that checks for the VERSION_1 feature bit in order to make
decisions about the device's endianness. This allows us to support
transitional devices.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

We allocate an dummy log even if the size is zero. So we should put it
unconditionally too.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Currently we allocate one vhost log per vhost device. This is sub
optimal when:

- Guest has several device with vhost as backend
- Guest has multiqueue devices

In the above cases, we can avoid the memory allocation by sharing a
single vhost log among all the vhost devices. This is done through:

- Introducing a new vhost_log structure with refcnt inside.
- Using a global pointer to vhost_log structure that will be used. And
  introduce helper to get the log with expected log size and helper to
- drop the refcnt to the old log.
- Each vhost device still keep track of a pointer to the log that was
  used.

With above, if no resize happens, all vhost device will share a single
vhost log. During resize, a new vhost_log structure will be allocated
and made for the global pointer. And each vhost devices will drop the
refcnt to the old log.

Tested by doing scp during migration for a 2 queues virtio-net-pci.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This PIIX4 init function has no more reason to receive a pointer to the
FwCfg object. Remove the parameter from the prototype, and update callers.

As a result, the pc_init1() function no longer needs to save the return
value of pc_memory_init() and xen_load_linux(), which makes it more
similar to pc_q35_init().

The return type & value of pc_memory_init() and xen_load_linux() are not
changed themselves; maybe we'll need their return values sometime later.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>

The acpi_pm1_cnt_init() core function is responsible for setting up the
register block that will ultimately react to S3 and S4 requests (see
acpi_pm1_cnt_write()). It makes sense to advertise this configuration to
the guest firmware via an easy to parse fw_cfg file (ACPI is too complex
for firmware to parse), and indeed PIIX4 does that. However, since
acpi_pm1_cnt_init() is not specific to PIIX4, neither should be the fw_cfg
file.

This patch makes "etc/system-states" appear on all chipsets modified in
the previous patch, not just PIIX4 (assuming they have fw_cfg at all).

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>

This patch only modifies the function prototype and updates all chipset
code that calls acpi_pm1_cnt_init() to pass in their own disable_s3 and
disable_s4 settings. vt82c686 is assumed to be fixed "S3 and S4 enabled".

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>

Drop superfluous pc-dimm alignment on hot-pluggable mem
range size assert, since it causes QEMU crash during hotplug
when hotplugging pc-dimm with alignment bigger than
an alignment of hot-pluggable mem range size.

Instead allow pc_dimm_get_free_addr() find free address
and bail out gracefully later in that function during
checking if pc-dimm will fit in hot-pluggable mem range.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

PXB does not work with unsupported bioses, but should
not interfere with normal OS operation.
We don't ship them anymore, but it's reasonable
to keep the work-around until we update the bios in qemu.

Fix this by not adding PXB mem/IO chunks to _CRS
if they weren't configured by BIOS.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

The pxb can be attach to and existing numa node by specifying
numa_node option that equals the desired numa nodeid.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

PCI root buses can be attached to a specific NUMA node.
PCI buses are not attached by default to a NUMA node.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

The bios does not index the pxb slot number when
it computes the IRQ because it resides on bus 0
and not on the current bus.
However Qemu routes the irq through bus 0 and adds
the pxb slot to the IRQ computation of the PXB device.

Synchronize between bios and Qemu by canceling
pxb's effect.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

The bios looks for 'etc/extra-pci-roots' to decide if
is going to scan further buses after bus 0 tree.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

PXB is a "light-weight" host bridge whose purpose is to enable
the main host bridge to support multiple PCI root buses
for pc machines.

As oposed to PCI-2-PCI bridge's secondary bus, PXB's bus
is a primary bus and can be associated with a NUMA node
(different from the main host bridge) allowing the guest OS
to recognize the proximity of a pass-through device to
other resources as RAM and CPUs.

The PXB is composed from:
 - A primary PCI bus (can be associated with a NUMA node)
   Acts like a normal pci bus and from the functionality point
   of view is an "expansion" of the bus behind the
   main host bridge.
 - A pci-2-pci bridge behind the primary PCI bus where the actual
   devices will be attached.
 - A host-bridge PCI device
   Situated on the bus behind the main host bridge, allows
   the BIOS to configure the bus number and IO/mem resources.
   It does not have its own config/data register for configuration
   cycles, this being handled by the main host bridge.
-  A host-bridge sysbus to comply with QEMU current design.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Use the newer pci_bus_num to correctly get the root bus number.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

If multiple root buses are used, root bus 0 cannot use all the
pci holes ranges. Remove the IO/mem ranges used by the other
primary buses.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Save the IO/mem/bus numbers ranges assigned to the extra root busses
to be removed from the root bus 0 range.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

If the machine has extra root busses that are snooping to
the i440fx host bridge, we need to add them to
acpi in order to be properly detected by guests.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

PXB buses are assumed to be children of bus 0. Look for them
while scanning the buses.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Because of the PXB hosts we cannot simply query TYPE_PCI_HOST_BRIDGE anymore.
On i386 arch we only have two pci hosts, so we can look only for them.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Refactoring it as a method of PCIBusClass will allow
different implementations for subclasses.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Refactoring it as a method of PCIBusClass will allow
different implementations for subclasses.

Removed the assumption that the root bus does not
have a parent device because is specific only
to the default class implementation.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Commit 68e6b0af (acpi: add aml_while() term) added
the definition of aml_while without the actual implementation.
Implement the term.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Add a new API named acpi_send_gpe_event() to send hotplug SCI.
This API can be used by pci, cpu and memory hotplug.

This patch is rebased on master.
Signed-off-by: NZhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Commit "019a3edb virtio: make features 64bit wide" missed a few changes,
as I've noticed while trying to rebase the virtio-1 branch to latest
master.  This patch adds them.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Failure was included on commit
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>