When qemu_open is passed a filename of the "/dev/fdset/nnn"
format (where nnn is the fdset ID), an fd with matching access
mode flags will be searched for within the specified monitor
fd set.  If the fd is found, a dup of the fd will be returned
from qemu_open.
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch converts all block layer close calls, that correspond
to qemu_open calls, to qemu_close.
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch converts all block layer open calls to qemu_open.

Note that this adds the O_CLOEXEC flag to the changed open paths
when the O_CLOEXEC macro is defined.
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds support that enables passing of file descriptors
to the QEMU monitor where they will be stored in specified file
descriptor sets.

A file descriptor set can be used by a client like libvirt to
store file descriptors for the same file.  This allows the
client to open a file with different access modes (O_RDWR,
O_WRONLY, O_RDONLY) and add/remove the passed fds to/from an fd
set as needed.  This will allow QEMU to (in a later patch in this
series) "open" and "reopen" the same file by dup()ing the fd in
the fd set that corresponds to the file, where the fd has the
matching access mode flag that QEMU requests.

The new QMP commands are:
  add-fd: Add a file descriptor to an fd set
  remove-fd: Remove a file descriptor from an fd set
  query-fdsets: Return information describing all fd sets

Note: These commands are not compatible with the existing getfd
and closefd QMP commands.
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Set the close-on-exec flag for the file descriptor received
via SCM_RIGHTS.
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

* origin/master:
  linux-user: ARM: Ignore immediate value for svc in thumb mode
  linux-user: Use init_guest_space when -R and -B are specified
  linux-user: Factor out guest space probing into a function
  flatload: fix bss clearing
  linux-user: make host_to_target_cmsg support SO_TIMESTAMP cmsg_type
  linux-user: make do_setsockopt support SOL_RAW ICMP_FILTER socket option
  linux-user: pass sockaddr from host to target
  x86: switch to AREG0 free mode
  x86: avoid AREG0 in segmentation helpers
  x86: avoid AREG0 for misc helpers
  x86: use wrappers for memory access helpers
  x86: avoid AREG0 for SMM helpers
  x86: avoid AREG0 for SVM helpers
  x86: avoid AREG0 for integer helpers
  x86: avoid AREG0 for condition code helpers
  x86: avoid AREG0 for FPU helpers
  linux-user: Move target_to_host_errno_table[] setup out of ioctl loop
  linux-user: Fix SNDCTL_DSP_MAP{IN, OUT}BUF ioctl definitions
  linux-user: Fix incorrect TARGET_BLKBSZGET, TARGET_BLKBSZSET

* 'linux-user.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
  linux-user: ARM: Ignore immediate value for svc in thumb mode
  linux-user: Use init_guest_space when -R and -B are specified
  linux-user: Factor out guest space probing into a function
  flatload: fix bss clearing
  linux-user: make host_to_target_cmsg support SO_TIMESTAMP cmsg_type
  linux-user: make do_setsockopt support SOL_RAW ICMP_FILTER socket option
  linux-user: pass sockaddr from host to target
  linux-user: Move target_to_host_errno_table[] setup out of ioctl loop
  linux-user: Fix SNDCTL_DSP_MAP{IN, OUT}BUF ioctl definitions
  linux-user: Fix incorrect TARGET_BLKBSZGET, TARGET_BLKBSZSET

When running in thumb mode, Linux doesn't evaluate the immediate value
of the svc instruction, but instead just always assumes the syscall number
to be in r7.

This fixes executing go_bootstrap while building go for me.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Roll the code used to initialize the guest memory space when -R
or -B is used into 'init_guest_space' and then call 'init_guest_space'
from the driver.  This way the reserved guest memory space can
be probed for.  Calling 'mmap' just once as is currently done is not
guaranteed to succeed since the host address space validation might fail.
Signed-off-by: NMeador Inge <meadori@codesourcery.com>
[PMM: Fixed minor whitespace errors.]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMeador Inge <meadori@codesourcery.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The current bss clear logic assumes the target mmap address and host
address are the same.  Use g2h to translate from the target address
space to the host so we can call memset on it.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NJing Huang <jing.huang.pku@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NJing Huang <jing.huang.pku@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NJing Huang <jing.huang.pku@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add an explicit CPUX86State parameter instead of relying on AREG0.

Remove temporary wrappers and switch to AREG0 free mode.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.

Rename remains of op_helper.c to seg_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Switch to wrapped versions of memory access functions.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Make FPU helpers take a parameter for CPUState instead
of relying on global env.

Introduce temporary wrappers for FPU load and store ops. Remove
wrappers for non-AREG0 code. Don't call unconverted helpers
directly.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* kraxel/seabios-5a02306:
  update seabios to latest master

Switch to my personal email address.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* qmp/queue/qmp: (48 commits)
  target-ppc: add implementation of query-cpu-definitions (v2)
  target-i386: add implementation of query-cpu-definitions (v2)
  qapi: add query-cpu-definitions command (v2)
  compiler: add macro for GCC weak symbols
  qapi: add query-machines command
  qapi: mark QOM commands stable
  qmp: introduce device-list-properties command
  qmp: add SUSPEND_DISK event
  qmp: qmp-events.txt: add missing doc for the SUSPEND event
  qmp: qmp-events.txt: put events in alphabetical order
  qmp: emit the WAKEUP event when the guest is put to run
  qmp: don't emit the RESET event on wakeup from S3
  scripts: qapi-commands.py: qmp-commands.h: include qdict.h
  docs: writing-qmp-commands.txt: update error section
  error, qerror: drop QDict member
  qerror: drop qerror_table and qerror_format()
  error, qerror: pass desc string to error calls
  error: drop error_get_qobject()/error_set_qobject()
  qemu-ga: switch to the new error format on the wire
  qmp: switch to the new error format on the wire
  ...

* quintela/migration-next-20120808:
  Restart optimization on stage3 update version
  Add XBZRLE statistics
  Add migration accounting for normal and duplicate pages
  Change total_time to total-time in MigrationStats
  Add migrate_set_cache_size command
  Add XBZRLE to ram_save_block and ram_save_live
  Add xbzrle_encode_buffer and xbzrle_decode_buffer functions
  Add uleb encoding/decoding functions
  Add cache handling functions
  Add XBZRLE documentation
  Add migrate-set-capabilities
  Add migration capabilities

* pmaydell/arm-devs.next:
  arm: Move some ARM devices into libhw
  ssd0323: abort() instead of exit(1) on error.
  hw/sd.c: make sd_wp_addr() return bool
  hw/sd.c: make sd_dataready() return bool
  hw/sd.c: convert binary variables to bool
  hw/sd.c: introduce wrapper for conversion address to wp group
  hw/sd.c: make sd_wp_addr() accept 64 bit address argument
  hw/sd.c: convert wp_groups in SDState to bitfield
  armv7m: Guard against no -kernel argument
  hw/armv7m_nvic: Fix incorrect default for num-irqs property

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This command attempts to map to the behavior of -cpu ?.  Unfortunately, the
output of this command differs wildly across targets.

To accommodate this, we use a weak symbol to implement a default version of the
command that fails with a QERR_NOT_SUPPORTED error code.  Targets can then
override and implement this command if it makes sense for them.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This lets us provide a default implementation of a symbol which targets can
override.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This provides the same output as -M ? but in a structured way.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

We've had a cycle to tweak.  It is time to commit to supporting them.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This can be used in conjunction with qom-list-types to determine the supported
set of devices and their parameters.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Emitted when the guest makes a request to enter S4 state.

There are three possible ways of having this event, as described here:

 http://lists.gnu.org/archive/html/qemu-devel/2012-07/msg02307.html

I've decided to add a new event and make it indepedent of SHUTDOWN.
This means that the SHUTDOWN event will eventually follow the
SUSPEND_DISK event.

I've choosen this way because of two reasons:

 1. Having an indepedent event makes it possible to query for its
    existence by using query-events

 2. In the future, we may allow the user to change what QEMU should
    do as a result of the guest entering S4. So it's a good idea to
    keep both events separated
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>

Today, the WAKEUP event is emitted when a wakeup _request_ is made.
This could be the system_wakeup command, for example.

A better semantic would be to emit the event when the guest is
already running, as that's what matters in the end. This commit does
that change.

In theory, this could break compatibility. In practice, it shouldn't
happen though, as clients shouldn't rely on timing characteristics of
the events. That is, a client relying that the guest is not running
when the event arrives may break if the event arrives after the guest
is already running.

This commit also adds the missing documentation for the WAKEUP event.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>