Update OpenBIOS images to SVN r1229 built from submodule.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

# By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/seabios-1.7.3.2:
  update seabios from 1.7.2.2 to 1.7.3.2

Message-id: 1380533055-24960-1-git-send-email-kraxel@redhat.com

# By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/roms.1:
  roms: add support for building sgabios
  roms: enable parallel seabios / seavgabios builds
  roms: enable ipxe cross builds
  roms: add rules to build slof
  roms: rewrite scripts/refresh-pxe-roms.sh
  roms: parallel ipxe builds
  roms: build lgplvgabios isavga variant
  roms: enable parallel builds for 'make lgplvgabios'
  roms: add 'make clean'

Message-id: 1380532378-22138-1-git-send-email-kraxel@redhat.com

pc,pci,virtio fixes and cleanups

This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 29 Sep 2013 01:51:16 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin (8) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  smbios: Factor out smbios_maybe_add_str()
  smbios: Make multiple -smbios type= accumulate sanely
  smbios: Improve diagnostics for conflicting entries
  smbios: Convert to QemuOpts
  smbios: Normalize smbios_entry_add()'s error handling to exit(1)
  virtio-net: fix up HMP NIC info string on reset
  pci: remove explicit check to 64K ioport size
  piix4: disable io on reset
  piix: use 64 bit window programmed by guest
  q35: use 64 bit window programmed by guest
  pci: add helper to retrieve the 64-bit range
  range: add min/max operations on ranges
  range: add Range to typedefs
  q35: make pci window address/size match guest cfg

Message-id: 1380437951-21788-1-git-send-email-mst@redhat.com

# By Max Reitz (10) and others
# Via Kevin Wolf
* kwolf/for-anthony: (30 commits)
  qcow2: Remove useless count_contiguous_clusters() parameter
  qcow2: COMPRESSED on count_contiguous_clusters
  qcow2: count_contiguous_clusters and compression
  qcow2: Free only newly allocated clusters on error
  qcow2: Always use error path in l2_allocate
  qcow2: Don't put invalid L2 table into cache
  qemu-iotests: Preallocated zero clusters in 061
  qcow2: Correct bitmap size in zero expansion
  qemu-iotests: Quote $TEST_IMG* and $TEST_DIR usage
  qemu-iotests: Add basic ability to use binary sample images
  qemu-iotests: fix qmp.py search path
  block: use DIV_ROUND_UP in bdrv_co_do_readv
  qcow2: Assert against currently impossible overflow
  block: qed - use QEMU_PACKED for on-disk structures
  block: qcow2 - used QEMU_PACKED for on-disk structures
  block: vpc - use QEMU_PACKED for on-disk structures
  block: vdi - use QEMU_PACKED for on-disk structures
  rbd: avoid qemu_rbd_snap_list() memory leaks
  qdict: Extract qdict_extract_subqdict
  block: Fix compiler warning (-Werror=uninitialized)
  ...

Message-id: 1380296370-14523-1-git-send-email-kwolf@redhat.com

# By Anthony PERARD (2) and Liu, Jinsong (2)
# Via Stefano Stabellini
* sstabellini/xen-2013-09-25:
  xen: Enable cpu-hotplug on xenfv machine.
  xen: Fix vcpu initialization.
  qemu: Add qemu xen logic for Xen HVM S3 resume
  qemu: Adjust qemu wakeup

Message-id: alpine.DEB.2.02.1309251749180.5498@kaball.uk.xensource.com

# By Richard Henderson (19) and Paolo Bonzini (2)
# Via Richard Henderson
* rth/tcg-ppc-pull: (21 commits)
  tcg-ppc64: Implement CONFIG_QEMU_LDST_OPTIMIZATION
  tcg-ppc64: Add _noaddr functions for emitting forward branches
  tcg-ppc64: Streamline tcg_out_tlb_read
  tcg-ppc64: Implement tcg_register_jit
  tcg-ppc64: Handle long offsets better
  tcg-ppc64: Tidy register allocation order
  tcg-ppc64: Look through a constant function descriptor
  tcg-ppc64: Fold constant call address into descriptor load
  tcg-ppc64: Don't load the static chain from TCG
  tcg-ppc64: Avoid code for nop move
  tcg-ppc64: Use tcg_out64
  tcg-ppc64: Use TCG_REG_Rn constants
  tcg-ppc64: More use of TAI and SAI helper macros
  tcg-ppc64: Reformat tcg-target.c
  tcg-ppc: Fix and cleanup tcg_out_tlb_check
  tcg-ppc: Use conditional branch and link to slow path
  tcg-ppc: Cleanup tcg_out_qemu_ld/st_slow_path
  tcg-ppc: Avoid code for nop move
  tcg-ppc: use new return-argument ld/st helpers
  tcg-ppc: fix qemu_ld/qemu_st for AIX ABI
  ...

Message-id: 1380126458-3247-1-git-send-email-rth@twiddle.net

# By Isaku Yamahata (4) and others
# Via Juan Quintela
* quintela/migration.next:
  migration: ram_handle_compressed
  arch_init: make is_zero_page accept size
  migration: Fix debug print type
  migration: add version supporting macros for struct pointer
  rdma: constify ram_chunk_{index, start, end}
  rdma: clean up of qemu_rdma_cleanup()
  arch_init: right return for ram_save_iterate
  savevm: fix wrong initialization by ram_control_load_hook
  savevm: add comments for qemu_file_get_error()

Message-id: 1380024203-25897-1-git-send-email-quintela@redhat.com

# By Bandan Das (3) and Gerd Hoffmann (1)
# Via Gerd Hoffmann
* kraxel/audio.1:
  audio: remove CONFIG_MIXEMU configure option
  hda-codec: make mixemu selectable at runtime
  hda-codec: refactor common definitions into a header file
  audio maintainers update

Message-id: 1380011943-15083-1-git-send-email-kraxel@redhat.com

This is a bunch of fixes/changes for the s390 architecture. It also
contains the fixes from the previous pull request, which did not make
it yet.
Overall it contains
- a fix for kexec without kdump (which uses diag308 subcode 0 instead of 1)
- several sclp related fixes
- some initial sclp migration code
- the sclp line mode console
- A fix for a boot problem with the virtio ccw ipl bios
- zeroed out padding bytes for the notes section of dump-guest-memory
- some cleanups

# gpg: Signature made Tue 24 Sep 2013 02:18:44 AM CDT using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found

# By Christian Borntraeger (6) and others
# Via Christian Borntraeger
* borntraeger/tags/s390-next-20130924:
  s390/sclplmconsole: Add support for SCLP line-mode console
  s390/ebcdic: Move conversion tables to header file
  s390/eventfacility: allow childs to handle more than 1 event type
  s390/eventfacility: remove unused event_type variable
  s390/eventfacility: Fix receive/send masks
  s390/eventfacility: fix multiple Read Event Data sources
  s390/sclp: add reset() functions
  s390/sclpquiesce: Add code to support live migration
  s390/sclpconsole: Add code to support live migration for sclpconsole
  s390/sclpconsole: modify definition of input buffer
  s390/kexec: Implement diag308 subcode 0
  s390/ioinst: Moved the CC setting to the IO instruction handlers
  s390/cpu: Make setcc() function available to other files
  s390/ipl: Update the s390-ccw.img rom
  s390/ipl: Fix waiting for virtio processing
  s390/dump: zero out padding bytes in notes sections
  s390/kvm: Add check for priviledged SCLP handler

Message-id: 1380007671-18976-1-git-send-email-borntraeger@de.ibm.com

'git shortlog d4f7d90f..ece025f5' says:

Alex Williamson (4):
      seabios q35: Enable all PIRQn IRQs at startup
      seabios q35: Add new PCI slot to irq routing function
      seabios: Add a dummy PCI slot to irq mapping function
      pciinit: Enable default VGA device

Asias He (2):
      virtio-scsi: Set _DRIVER_OK flag before scsi target scanning
      virtio-scsi: Pack struct virtio_scsi_{req_cmd,resp_cmd}

Avik Sil (1):
      USB-EHCI: Fix null pointer assignment

Christian Gmeiner (5):
      geodevga: fix errors in geode_fp_* functions
      geodevga: move framebuffer setup
      geodevga: move output setup to own function
      geodevga: add debug to msr functions
      geodevga: fix wrong define name

David Woodhouse (26):
      Add macros for pushing and popping struct bregs
      Clean up #if in pirtable.c. CONFIG_PIRTABLE can't be set if CONFIG_COREBOOT is
      post: Export functions which will be used individually by CSM
      Export callrom() for CSM to use
      Export copy_smbios() from biostables.c
      Import LegacyBios.h from OVMF
      Complete and checksum EFI_COMPATIBILITY16_TABLE at build time
      Add pic_save_mask() and pic_restore_mask() functions
      Add CSM support
      Add README.CSM
      Add find_pmtimer() function
      Enable PMTIMER for CSM build
      Fix rom_reserve()/rom_confirm() for CSM oprom dispatch
      Don't calibrate TSC if PMTIMER is already set up
      Move find_pmtimer() to ACPI table setup where it logically belongs
      Use find_pmtimer() after copying Xen ACPI tables
      Use find_pmtimer() after copying coreboot ACPI tables
      Unify return path for CSM to go via csm_return()
      Make CONFIG_OPTIONROMS_DEPLOYED depend on CONFIG_QEMU
      Implement !CONFIG_OPTIONROMS support for CSM
      Implement !CONFIG_BOOT for CSM
      Enable VGA output when settings bochs-specific mode
      Disable CONFIG_THREAD_OPTIONROMS for CSM build
      Fix return type of le64_to_cpu() and be64_to_cpu()
      Rename find_pmtimer() to find_acpi_features()
      Add acpi_reboot() reset method using RESET_REG

Gerd Hoffmann (6):
      config: allow DEBUG_IO for !QEMU
      coreboot: add qemu detection
      tweak coreboot qemu detection
      apm: fix shutdown
      ahci: add missing check for allocation failure
      fix buildversion.sh

Hu Tao (1):
      Add pvpanic device driver

Kevin O'Connor (101):
      pmm: Use 'struct segoff_s' in pmm header.
      Minor: Update README - variable changes are now reset on soft-reboots.
      Normalize POST initialization function name suffixes.
      POST: Reorganize post init functions for better grouping and reusability.
      Fix rebase error in commit 8a0a972f that broke LOWMEM variables.
      Support calling a function other than maininit() from reloc_preinit().
      Ensure exported symbols are visible in the final link
      POST: Move QEMU specific ramsize and BIOS table setup to paravirt.c.
      POST: Reorganize post entry and "preinit" functions.
      POST: Move cpu caching and dma setup to platform_hardware_setup().
      Undo incorrect assumptions about Xen in commit 6ca0460f.
      Determine century during init and store in VARLOW mem during runtime.
      No need to check both CONFIG_THREADS and CONFIG_THREAD_OPTIONROMS.
      Add runningOnQEMU() and runningOnXen() for runtime platform detection.
      Consistently use CONFIG_COREBOOT, CONFIG_QEMU, and runningOnXen().
      Convert kvm_para_available() to runningOnKVM().
      Minor - move definitions to paravirt.c from paravirt.h.
      Only perform SMP setup on QEMU.
      Start device_hardware_setup in mainint even with CONFIG_THREAD_OPTIONROMS.
      The mathcp setup touches the PIC and thus move to the "setup" phase.
      Update tools/acpi_extract.py to handle iasl 20130117 release.
      Support skipping content when reading from QEMU fw_cfg romfile entries.
      Convert fw_cfg ACPI entries into romfile entries.
      Convert fw_cfg SMBIOS entries into romfile entries.
      Convert basic integer fw_cfg entries into romfile entries.
      Convert fw_cfg NUMA entries into a romfile entry.
      Process fw_cfg e820 entries during the fw_cfg setup stage.
      Integrate qemu_cfg_preinit() into qemu_romfile_init().
      Group QEMU platform setup together and move to paravirt.c.
      vgabios: Bochs/QEMU vgabios support should depend on CONFIG_QEMU.
      Warn on unaligned PCI ROM structure in option roms.
      Fix Makefile - don't reference "out/" directly, instead use "$(OUT)".
      build: Don't require $(OUT) to be a sub-directory of the main directory.
      Rename rom_get_top() to rom_get_max().
      Report on f-segment UMB ram also.
      Clarify build generated "zone low" values.
      Verify CC is valid during build tests.
      Disable handle_post() on CSM builds.
      Remove unnecessary "export" declarations from assembler functions.
      Minor assembler enhancements to __csm_return.
      Introduce VARFSEG for variables that will reside in the f-segment.
      Convert VAR16VISIBLE, VAR16EXPORT, and VAR32VISIBLE to VARFSEG.
      Don't relocate "varlow" variable references at runtime.
      Move malloc's ZoneFSeg and ZoneLow setup to malloc_init.
      Calculate "RamSize" needed by 16bit interface dynamically.
      Eliminate separate BiosTableSpace[] space for f-segment allocations.
      Use CONFIG_ prefix for Kconfig variables; use BUILD_ for others.
      Try to detect an unsuccessful hard-reboot to prevent soft-reboot loops.
      Minor - fix confusing final_sec32low_start name in layoutrom.py.
      Minor - introduce numeric defines for the IVT offset of hw irqs.
      Separate out 16bit PCI-BIOS entry point from regular int 0x1a entry point.
      Support using the "extra stack" for all 16bit irq entry points.
      Minor - improve comments and grouping of handle_08().
      floppy: Introduce 'struct floppy_pio_s' for floppy PIO ops.
      floppy: Cleanup floppy irq wait handling.
      floppy: Clean up Check Interrupt Status code.
      floppy: Move recalibration and results parsing to floppy_cmd().
      floppy: Improve floppy_pio() error checking.
      floppy: Implement media format sensing.
      floppy: Actually do controller reset in floppy_reset().
      Minor - note that passing QEMU config via cmos is deprecated.
      Cache boot-fail-wait to avoid romfile access after POST.
      Rename src/ssdt-susp.dsl to src/ssdt-misc.dsl.
      acpi: Eliminate BDAT parameter passing to DSDT code.
      Add additional dependency checks to Makefile.
      Don't use __FILE__ in virtio-ring.c.
      shadow: Don't use PCIDevices list in make_bios_readonly().
      smm: Don't use PCIDevices list in smm_setup().
      Add VARVERIFY32INIT attribute for variables only available during "init".
      Use VARVERIFY32INIT on global variables that point to "tmp" memory.
      vgabios: Fix stdvga_perform_gray_scale_summing().
      vgabios: Fix cirrus memory clear on mode switch.
      Minor - add missing newline to floppy debug statement.
      Fix bug in NUMA node setup - don't create SRAT if NUMA not present.
      Update README - copy *.aml files for QEMU.
      Add dependencies to vgafixup.py and buildversion.sh scripts.
      Set ZF prior to keyboard read call in check_for_keystroke().
      mptable: Don't describe pci-to-pci bridges.
      mptable: Use same PCI irqs as ACPI code.
      Cleanup QEMU_CFG_NUMA fw_cfg processing - split into two romfile entries.
      Use container_of on romfile entries.
      acpi: Move ACPI table definitions from acpi.c to acpi.h.
      acpi: Remove dead code with descriptions of bit flags.
      acpi: Use cpu_to_leXX() consistently.
      Minor - explicitly close files in buildrom.py.
      Minor - move "tracked memory alloc" code in pmm.c.
      Introduce and convert pmm code to use standard list helpers.
      Minor - relocate code in stacks.c to keep low-level thread code together.
      Introduce helper function have_threads() in stacks.c.
      Convert stacks.c to use standard list manipulation code.
      Convert boot.c to use standard list manipulation code.
      Convert pciinit.c to use standard list manipulation code.
      Convert PCIDevices list to use standard list manipultion code.
      Revert "Convert pciinit.c to use standard list manipulation code."
      Fix error in hlist_for_each_entry_safe macro.
      Convert pciinit.c to use standard list manipulation code.
      make qemu_cfg_init depend on QEMU_HARDWARE instead of QEMU
      Another fix for hlist_for_each_entry_safe.
      Minor - remove debugging dprintf added to pciinit.c.
      Fix USB EHCI detection that was broken in hlist conversion of PCIDevices.
      Fix bug in CBFS file walking with compressed files.

Laszlo Ersek (1):
      Enable VGA output when setting Cirrus-specific mode

Michael S. Tsirkin (2):
      acpi: make default DSDT optional
      acpi: sync FADT flags from PIIX4 to Q35
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add some logic to detect cross compilers.  Add support for "make slof",
which should JustWork[tm] if you are on a ppx64 machine or have a ppc64
cross compiler installed somewhere in your path.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Just use the Makefile in roms/
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Enable parallel ipxe builds.  Reduce the recursive make calls.  Call
recursive make properly using $(MAKE) $(MAKEFLAGS).
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add logic to also build+install the isavga vgabios variant.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Recurse into vgabios once, adjust dependencies, call make using
$(MAKE) $(MAKEFLAGS) so jobserver mode works.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Currently, -smbios type=T,NAME=VAL,... adds one field (T,NAME) with
value VAL to fw_cfg for each unique NAME.  If NAME occurs multiple
times, the last one's VAL is used (before the QemuOpts conversion, the
first one was used).

Multiple -smbios can add multiple fields with the same (T, NAME).
SeaBIOS reads all of them from fw_cfg, but uses only the first field
(T, NAME).  The others are ignored.

"First one wins, subsequent ones get ignored silently" isn't nice.  We
commonly let the last option win.  Useful, because it lets you
-readconfig first, then selectively override with command line
options.

Clean up -smbios to work the common way.  Accumulate the settings,
with later ones overwriting earlier ones.  Put the result into fw_cfg
(no more useless duplicates).

Bonus cleanup: qemu_uuid_parse() no longer sets SMBIOS system uuid by
side effect.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We allow either tables or fields for the same type.  Makes sense,
because SeaBIOS uses fields only when no tables are present.

We do this by searching the SMBIOS blob for a previously added table
or field.  Error messages look like this:

    qemu-system-x86_64: -smbios type=1,serial=42: SMBIOS type 1 table already defined, cannot add field

User needs to know that "table" is defined by -smbios file=..., and
"field" by -smbios type=...

Instead of searching the blob, record additions of interest, and check
that.  Simpler, and makes better error messages possible:

    qemu-system-x86_64: -smbios file=smbios_type_1.bin: Can't mix file= and type= for same type
    qemu-system-x86_64: -smbios type=1,serial=42,serial=99: This is the conflicting setting
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

So that it can be set in config file for -readconfig.

This tightens parsing of -smbios, and makes it more consistent with
other options: unknown parameters are rejected, numbers with trailing
junk are rejected, when a parameter is given multiple times, last
rather than first wins, ...

MST: drop one chunk to fix build errors
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

It exits on all error conditions but one, where it returns -1.
Normalize, and return void.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

All callers pass start = 0, and it's doubtful if any other value would
actually do what you expect. Remove the parameter.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>

Compressed clusters can never be contiguous, therefore the corresponding
flag does not need to be given explicitly to count_contiguous_clusters.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The function is not intended to be used on compressed clusters and will
not work correctly, if used anyway, since L2E_OFFSET_MASK is not the
right mask for determining the offset of compressed clusters. Therefore,
assert that the first cluster is not compressed and always include the
compression flag in the mask of significant flags, i.e., stop the search
as soon as a compressed cluster occurs.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In expand_zero_clusters_in_l1, a new cluster is only allocated if it was
not already preallocated. On error, such preallocated clusters should
not be freed, but only the newly allocated ones.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Just returning -errno in some cases prevents
trace_qcow2_l2_allocate_done from being executed (and, in one case, also
the unused allocated L2 table from being freed). Always going down the
error path fixes this.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In l2_allocate, the fail path is executed if qcow2_cache_flush fails.
However, the L2 table has not yet been fetched from the L2 table cache.
The qcow2_cache_put in the fail path therefore basically gives an
undefined argument as the L2 table address (in this case).
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a test case for zero cluster expansion on an image completely filled
with preallocated zero clusters to test 061.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Since the expanded_clusters bitmap is addressed using host offsets in
the underlying image file, the correct size to use for allocating the
bitmap is not determined by the guest disk image but by the underlying
host image file.

Furthermore, this size may change during the expansion due to cluster
allocations on growable image files. In this case, the bitmap needs to
be resized as well to reflect the growth.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

A lot of image filename and paths are used unquoted.  Quote these to
make sure that directories / filenames with spaces are not problematic.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

For image formats that are not "QEMU native", but supported for
compatibility, it is useful to verify that an image created with
the 'gold standard' native tool can be read / written to successfully
by QEMU.

In addition to testing non-native images, this could also be useful to
test against image files created by older versions of QEMU.

This provides a directory to store small sample images, for use by
scripts in tests/qemu-iotests.

Image files should be compressed with bzip2.

To use a sample image from a bash script, the _use_sample_img function
will copy and decompress the image into $TEST_DIR, and set $TEST_IMG to
be the decompressed sample image copy.  To cleanup, call
_cleanup_test_img as normal.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

QMP/qmp.py is renamed to scripts/qmp/qmp.py, fix the search path in iotests.py.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If qcow2_alloc_cluster_link_l2 is called with a QCowL2Meta describing a
request crossing L2 boundaries, a buffer overflow will occur. This is
impossible right now since such requests are never generated (every
request is shortened to L2 boundaries before) and probably also
completely unintended (considering the name "QCowL2Meta"), however, it
is still worth an assertion.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

QEDHeader is read, and written, directly from on-disk images
via bdrv_pread()/write().  To avoid any unintentional padding,
these structs should be packed.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

QCowHeader and QCowExtension are structs that reside in the on-disk
image format, and are read and written directly via bdrv_pread()/write(),
and as such should be packed to avoid any unintentional struct padding.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>