commit a9f98bb5 vhost: multiqueue
support changed the order of stopping the device. Previously
vhost_dev_stop would disable backend and only afterwards, unset guest
notifiers. We now unset guest notifiers while vhost is still
active. This can lose interrupts causing guest networking to fail. In
particular, this has been observed during migration.

To adapt this, several other changes are needed:
- remove the hdev->started assertion in vhost.c since we may want to
start the guest notifiers before vhost starts and stop the guest
notifiers after vhost is stopped.
- introduce the vhost_net_set_vq_index() and call it before setting
guest notifiers. This is used to guarantee vhost_net has the correct
virtqueue index when setting guest notifiers.

Cc: qemu-stable@nongnu.org
Reported-by: N"Zhangjie (HZ)" <zhangjie14@huawei.com>
Tested-by: NWilliam Dauchy <wdauchy@gmail.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Since
commit 95d65800
    msi: Invoke msi/msix_write_config from PCI core
msix config writes are lost, the value written is always 0.

Fix pci_default_write_config to avoid this.

Cc: qemu-stable@nongnu.org
Signed-off-by: NKnut Omang <knut.omang@oracle.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

commit 783e7706
    virtio-net: stop/start bh when appropriate

is incomplete: BH might execute within the same main loop iteration but
after vmstop, so in theory, we might trigger an assertion.
I was unable to reproduce this in practice,
but it seems clear enough that the potential is there, so worth fixing.

Cc: qemu-stable@nongnu.org
Reported-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

commit 0f9b1771
    ioh3420: Remove obsoleted, unused ioh3420_init function
removed the implementation of ioh3420_init

Drop the declaration from the header file as well.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NKnut Omang <knut.omang@oracle.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Checking vhost device internal state in vhost_net looks like
a layering violation since vhost_net does not
set this flag: it is set and tested by vhost.c.
There seems to be no reason to check this:
caller in virtio net uses its own flag,
vhost_started, to ensure vhost is started/stopped
as appropriate.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NAmos Kong <akong@redhat.com>

Add IOTLB to cache information about the translation of input-addresses. IOTLB
use a GHashTable as cache. The key of the hash table is the logical-OR of gfn
and source id after left-shifting.
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add context-cache to cache context-entry encountered on a page-walk. Each
VTDAddressSpace has a member of VTDContextCacheEntry which represents an entry
in the context-cache. Since devices with different bus_num and devfn have their
respective VTDAddressSpace, this will be a good way to reference the cached
entries.
Each VTDContextCacheEntry will have a context_cache_gen and the cached entry
is valid only when context_cache_gen equals IntelIOMMUState.context_cache_gen.
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add supports for queued invalidation interface, an expended invalidation
interface with extended capabilities.
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Fix coding style issues around in hw/pci-host/q35.c and hw/core/machine.c.
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add Intel IOMMU emulation to q35 chipset and expose it to the guest.
1. Add a machine option. Users can use "-machine iommu=on|off" in the command
line to enable/disable Intel IOMMU. The default is off.
2. Accroding to the machine option, q35 will initialize the Intel IOMMU and
use pci_setup_iommu() to setup q35_host_dma_iommu() as the IOMMU function for
the pci bus.
3. q35_host_dma_iommu() will return different address space according to the
bus_num and devfn of the device.
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Expose Intel IOMMU to the BIOS. If object of TYPE_INTEL_IOMMU_DEVICE exists,
add DMAR table to ACPI RSDT table. For now the DMAR table indicates that there
is only one hardware unit without INTR_REMAP capability on the platform.
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add support for emulating Intel IOMMU according to the VT-d specification for
the q35 chipset machine. Implement the logics for DMAR (DMA remapping) without
PASID support. The emulation supports register-based invalidation and primary
fault logging.
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add a bool variable is_write as a parameter to the translate function of
MemoryRegionIOMMUOps to indicate the operation of the access. It can be
used for correct fault reporting from within the callback.
Change the interface of related functions.
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NKnut Omang <knut.omang@oracle.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NKnut Omang <knut.omang@oracle.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Rename helper functions to make a clearer distinction between
the PCIe capability/control register feature ARI forwarding and a
device that supports the ARI feature via an ARI extended PCIe capability.
Signed-off-by: NKnut Omang <knut.omang@oracle.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

PCI_ARI_CAP_NFN, a macro for reading next function was used instead of
the intended write.
Signed-off-by: NKnut Omang <knut.omang@oracle.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Needed for systems without IASL.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add an SSDT ACPI table for the TPM device.
Add a TCPA table for BIOS logging area when a TPM is being used.

The latter follows this spec here:

http://www.trustedcomputinggroup.org/files/static_page_files/DCD4188E-1A4B-B294-D050A155FB6F7385/TCG_ACPIGeneralSpecification_PublicReview.pdf

This patch has Michael Tsirkin's patches folded in.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

commit 868270f2
    acpi-build: tweak acpi migration limits
broke kernel loading with -kernel/-initrd: it doubled
the size of ACPI tables but did not reserve
enough memory.

As a result, issues on boot and halt are observed.

Fix this up by doubling reserved memory for new machine types.

Cc: qemu-stable@nongnu.org
Reported-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Prevent out-of-bounds array access on
acpi_pcihp_pci_status.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

The regions are destroyed and recreated on configuration space accesses.
We need to destroy them before the containing PCIBridgeWindows object
is freed.
Reported-by: NGonglei <arei.gonglei@huawei.com>
Reported-by: NKnut Omang <knut.omang@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When memory is allocated on a wrong node, MPOL_MF_STRICT
doesn't move it - it just fails the allocation.
A simple way to reproduce the failure is with mlock=on
realtime feature.

The code comment actually says: "ensure policy won't be ignored"
so setting MPOL_MF_MOVE seems like a better way to do this.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

target-arm:
 * fix preferred return address for A64 BRK insn
 * implement AArch64 single-stepping
 * support loading gzip compressed AArch64 kernels
 * use correct PSCI function IDs in the DT when KVM uses PSCI 0.2
 * minor cleanups

# gpg: Signature made Tue 19 Aug 2014 19:04:09 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140819:
  arm: stellaris: Remove misleading address_space_mem var
  arm: armv7m: Rename address_space_mem -> system_memory
  aarch64: Allow -kernel option to take a gzip-compressed kernel.
  loader: Add load_image_gzipped function.
  arm: cortex-a9: Fix cache-line size and associativity
  arm/virt: Use PSCI v0.2 function IDs in the DT when KVM uses PSCI v0.2
  target-arm: Rename QEMU PSCI v0.1 definitions
  target-arm: Implement MDSCR_EL1 as having state
  target-arm: Implement ARMv8 single-stepping for AArch32 code
  target-arm: Implement ARMv8 single-step handling for A64 code
  target-arm: A64: Avoid duplicate exit_tb(0) in non-linked goto_tb
  target-arm: Set PSTATE.SS correctly on exception return from AArch64
  target-arm: Correctly handle PSTATE.SS when taking exception to AArch32
  target-arm: Don't allow AArch32 to access RES0 CPSR bits
  target-arm: Adjust debug ID registers per-CPU
  target-arm: Provide both 32 and 64 bit versions of debug registers
  target-arm: Allow STATE_BOTH reginfo descriptions for more than cp14
  target-arm: Collect up the debug cp register definitions
  target-arm: Fix return address for A64 BRK instructions
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This reverts commit b0225c2c
(which breaks building with Xen enabled and also leaks memory).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

It's a MemoryRegion and not an AddressSpace. But since it's single use,
just inline the get_system_memory() call to the only usage to remove it.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d6914047e10b956514cfaa5f391ef56c7d851b34.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This argument is a MemoryRegion and not an AddressSpace.

"Address space" means something quite different to "memory region"
in QEMU parlance so rename the variable to reduce confusion.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f666cf7f2318d9b461b1e320a45bf0d82da9b7dd.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

On aarch64 it is the bootloader's job to uncompress the kernel.  UEFI
and u-boot bootloaders do this automatically when the kernel is
gzip-compressed.

However the qemu -kernel option does not do this.  The following
command does not work:

  qemu-system-aarch64 [...] -kernel /boot/vmlinuz

because it tries to execute the gzip-compressed data.

This commit lets gzip-compressed kernels be uncompressed
transparently.

Currently this is only done when emulating aarch64.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-3-git-send-email-rjones@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As the name suggests this lets you load a ROM/disk image that is
gzipped.  It is uncompressed before storing it in guest memory.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-2-git-send-email-rjones@redhat.com
[PMM: removed stray space before ')']
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For A9, The cache associativity is 4 and the lines size is 32B.
Self identify in CCSIDR accordingly. Cache size remains at 16k.

QEMU doesn't emulate caches, but we should still report the correct
cache-line size to the guest. Some guests (like u-boot) complain if
the cache-line size mismatches a requested flush or invalidate
operation.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1de6bd40155a1d2f2e93e24b1b1d1d677a432641.1408346233.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The current code supplies the PSCI v0.1 function IDs in the DT even when
KVM uses PSCI v0.2.

This will break guest kernels that only support PSCI v0.1 as they will
use the IDs provided in the DT.  Guest kernels with PSCI v0.2 support
are not affected by this patch, because they ignore the function IDs in
the device tree and rely on the architecture definition.

Define QEMU versions of the constants and check that they correspond to
the Linux defines on Linux build hosts.  After this patch, both guest
kernels with PSCI v0.1 support and guest kernels with PSCI v0.2 should
work.

Tested on TC2 for 32-bit and APM Mustang for 64-bit (aarch64 guest
only).  Both cases tested with 3.14 and linus/master and verified I
could bring up 2 cpus with both guest kernels.  Also tested 32-bit with
a 3.14 host kernel with only PSCI v0.1 and both guests booted here as
well.

Cc: qemu-stable@nongnu.org
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The function IDs for PSCI v0.1 are exported by KVM and defined as
KVM_PSCI_FN_<something>.  To build using these defines in non-KVM code,
QEMU defines these IDs locally and check their correctness against the
KVM headers when those are available.

However, the naming scheme used for QEMU (almost) clashes with the PSCI
v0.2 definitions from Linux so to avoid unfortunate naming when we
introduce local PSCI v0.2 defines, rename the current local defines with
QEMU_ prependend and clearly identify the PSCI version as v0.1 in the
defines.

Cc: qemu-stable@nongnu.org
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Now that all the new code to support single-stepping is in
place, wire up the guest-visible MDSCR_EL1, so the guest
can enable single-stepping.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

ARMv8 single-stepping requires the exception level that controls
the single-stepping to be in AArch64 execution state, but the
code being stepped may be in AArch64 or AArch32. Implement the
necessary support code for single-stepping AArch32 code.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Implement ARMv8 software single-step handling for A64 code:
correctly update the single-step state machine and generate
debug exceptions when stepping A64 code.

This patch has no behavioural change since MDSCR_EL1.SS can't
be set by the guest yet.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

If gen_goto_tb() decides not to link the two TBs, then the
fallback path generates unnecessary code:
 * if singlestep is enabled then we generate unreachable code
   after the gen_exception_internal(EXCP_DEBUG)
 * if singlestep is disabled then we will generate exit_tb(0)
   twice, once in gen_goto_tb() and once coming out of the
   main loop with is_jmp set to DISAS_JUMP

Correct these deficiencies by only emitting exit_tb() in the
non-singlestep case, in which case we can use DISAS_TB_JUMP
to suppress the main-loop exit_tb().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Set the PSTATE.SS bit correctly on exception returns from AArch64,
as required by the debug single-step functionality.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

When an exception is taken to AArch32, we must clear the PSTATE.SS
bit for the exception handler, and must also ensure that the SS bit
is not set in the value saved to SPSR_<mode>. Achieve both of these
aims by clearing the bit in uncached_cpsr before saving it to the SPSR.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

The CPSR has a new-in-v8 execution state bit (IL), and
also some state which has effects in AArch32 but appears
only in the SPSR format (SS) but is RES0 in the CPSR.

Add the IL bit to CPSR_EXEC, and enforce that guest direct
reads and writes to CPSR can't read or write the RES0
bits, so the guest can't get at the SS bit which we store
in uncached_cpsr. This includes not permitting exception
returns to copy reserved bits from an SPSR into CPSR.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>