Add a test for creating and amending images (amendment uses the creation
options) with formats not supporting creation over protocols not
supporting creation.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
(cherry picked from commit 2247798d)

Conflicts:
	tests/qemu-iotests/group

*removed context dependencies from upstream iotest groups
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

There may be NBD tests which do not create a sample image and simply
test whether wrong usage of the protocol is rejected as expected. In
this case, there will be no NBD server and trying to kill it during
clean-up will fail.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
(cherry picked from commit f798068c)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

The image options which can be amended are described by the .create_opts
field for every driver. This field must therefore be non-NULL so that
anything can be amended in the first place. Check that this holds true
before going into qemu_opts_create() (because if .create_opts is NULL,
the create_opts pointer in img_amend() will be NULL after
qemu_opts_append()).

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
(cherry picked from commit b2439d26)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

If a driver supports image creation, it needs to set the .create_opts
field. We can use that to make sure .create_opts for both drivers
involved is not NULL for the target image in qemu-img convert, which is
important so that the create_opts pointer in img_convert() is not NULL
after the qemu_opts_append() calls and when going into
qemu_opts_create().

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
(cherry picked from commit f75613cf)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

If a driver supports image creation, it needs to set the .create_opts
field. We can use that to make sure .create_opts for both drivers
involved is not NULL in bdrv_img_create(), which is important so that
the create_opts pointer in that function is not NULL after the
qemu_opts_append() calls and when going into qemu_opts_create().

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
(cherry picked from commit c6149724)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

The nfs protocol driver is capable of creating images, but did not
specify any creation options. Fix it.

A way to test this issue is the following:

$ qemu-img create -f nfs nfs://127.0.0.1/foo.qcow2 64M

Without this patch, it segfaults. With this patch, it does not. However,
this is not something that should really work; qemu-img should check
whether the parameter for the -f option (and -O for convert) is indeed a
format, and error out if it is not. Therefore, I am not making it an
iotest.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
(cherry picked from commit fd752801)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Although virtually impossible right now, bdrv_find_format("qcow") may
fail. The vvfat block driver should heed that case.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
(cherry picked from commit 1bcb15cf)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

We can always assume raw, file and qcow2 being available; so do not use
bdrv_find_format() to locate their BlockDriver objects but statically
reference the respective objects.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
(cherry picked from commit ef810437)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

There are some block drivers which are essential to QEMU and may not be
removed: These are raw, file and qcow2 (as the default non-raw format).
Make their BlockDriver objects public so they can be directly referenced
throughout the block layer without needing to call bdrv_find_format()
and having to deal with an error at runtime, while the real problem
occurred during linking (where raw, file or qcow2 were not linked into
qemu).

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
(cherry picked from commit 5f535a94)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

virtio_net_handle_ctrl() and other functions that process control vq
request call iov_discard_front() which will shorten the iov. This will
lead unmapping in virtqueue_push() leaks mapping.

Fixes this by keeping the original iov untouched and using a temp variable
in those functions.

Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1417082643-23907-1-git-send-email-jasowang@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 771b6ed3)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

The other callers to blk_set_enable_write_cache() in this file
already check for s->blk == NULL.
Signed-off-by: NDon Slutz <dslutz@verizon.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416259239-13281-1-git-send-email-dslutz@verizon.com
Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 6b896ab2)

Conflicts:
	hw/ide/core.c

*removed dependency on 4be74634Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

The code in invalidate_and_set_dirty() needs to handle addr/length
combinations which cross guest physical page boundaries. This can happen,
for example, when disk I/O reads large blocks into guest RAM which previously
held code that we have cached translations for. Unfortunately we were only
checking the clean/dirty status of the first page in the range, and then
were calling a tb_invalidate function which only handles ranges that don't
cross page boundaries. Fix the function to deal with multipage ranges.

The symptoms of this bug were that guest code would misbehave (eg segfault),
in particular after a guest reboot but potentially any time the guest
reused a page of its physical RAM for new code.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1416167061-13203-1-git-send-email-peter.maydell@linaro.org
(cherry picked from commit f874bf90)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

freeaddrinfo(result) does not assign result = NULL, after frees it.
There will be a double free when it goes error case.
It is reported by covertiy.
Reviewed-by: NGonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 77374582)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

In function connect_to_qemu(), getaddrinfo() will allocate memory
that is stored into server, it should be freed by using freeaddrinfo()
before connect_to_qemu() return.

Cc: qemu-stable@nongnu.org
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 5bbebf62)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Old BIOSes left some padding by mistake after the req_size/resp_size.
New QEMU does not like it, thinking it is a bidirectional command.

As a workaround, we can check if the ANY_LAYOUT bit is set; if not, we
always consider the first buffer as the virtio-scsi request/response,
because, back when QEMU did not support ANY_LAYOUT, it expected the
payload to start at the second element of the iovec.

This can show up during migration.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 55783a55)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Memory slots have to be page aligned to get entered into KVM. There
is existing logic that tries to ensure that we pad memory slots that
are not page aligned to the biggest region that would still fit in the
alignment requirements.

Unfortunately, that logic is broken. It tries to calculate the start
offset based on the region size.

Fix up the logic to do the thing it was intended to do and document it
properly in the comment above it.

With this patch applied, I can successfully run an e500 guest with more
than 3GB RAM (at which point RAM starts overlapping subpage memory regions).

Cc: qemu-stable@nongnu.org
Signed-off-by: NAlexander Graf <agraf@suse.de>
(cherry picked from commit f2a64032)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Entry opcode needs to check if moving to new register frame would cause
register window overflow. Entry used in function prologue never
overflows because preceding windowed call* opcode writes return address
to the target register window frame, causing overflow exceptions at the
point of call. But when a sequence of entry opcodes is used for register
window spilling there may not be a call or other opcode that would cause
window check between entries and they would not raise overflow exception
themselves resulting in data corruption.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit 1b3e71f8)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

A linux guest will be issuing messages:

[   32.124042] DC390: Deadlock in DataIn_0: DMA aborted unfinished: 000000 bytes remain!!
[   32.126348] DC390: DataIn_0: DMA State: 0

and the HBA will fail to work properly.
Reason is the emulation is not setting the 'DMA transfer done'
status correctly.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit c3543fb5)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

The g_hash_table_iter_* functions for iterating through a hash table
are not present in glib 2.12, which is our current minimum requirement.
Rewrite the code to use g_hash_table_foreach() instead.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
(cherry picked from commit f8833a37)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

If there are still pending i/o while deleting snapshot,
because deleting snapshot is done in non-coroutine context, and
the pending i/o read/write (bdrv_co_do_rw) is done in coroutine context,
so it's possible to cause concurrency problem between above two operations.
Add bdrv_drain_all() to bdrv_snapshot_delete() to avoid this problem.
Signed-off-by: NZhang Haoyu <zhanghy@sangfor.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 201410211637596311287@sangfor.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 3432a192)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

U-boot for xtensa always treats uImage load address as virtual address.
This is important when booting uImage on xtensa core with MMUv2, because
MMUv2 has fixed non-identity virtual-to-physical mapping after reset.

Always do virtual-to-physical translation of uImage load address and
load uImage at the translated address. This fixes booting uImage kernels
on dc232b and other MMUv2 cores.

Cc: qemu-stable@nongnu.org
Reported-by: NWaldemar Brodkorb <mail@waldemar-brodkorb.de>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit 6d2e4530)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.

Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.

No user-visible functional changes.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
(cherry picked from commit 25bda50a)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Commit 9d8bf2d1 moved the softmmu slow path out of line and introduce a
regression at the same time by always calling tcg_out_tlb_load with
is_load=1. This makes impossible to run any significant code under
qemu-system-mips*.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 0a2923f8)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

If req->resp.cmd.status is not GOOD, the address of sense for
qemu_iovec_from_buf should be modified from &req->resp to sense.

Cc: qemu-stable@nongnu.org
Signed-off-by: NTing Wang <kathy.wangting@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b7890c40)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

bits_per_pixel that are less than 8 could result in accessing
non-initialized buffers later in the code due to the expectation
that bytes_per_pixel value that is used to initialize these buffers is
never zero.

To fix this check that bits_per_pixel from the client is one of the
values that the rfb protocol specification allows.

This is CVE-2014-7815.
Signed-off-by: NPetr Matousek <pmatouse@redhat.com>

[ kraxel: apply codestyle fix ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit e6908bfe)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

qemu_shutdown_requested may be interrupted by qemu_system_killed. If the
latter sets shutdown_requested after qemu_shutdown_requested has read it
but before it was cleared, the shutdown event is lost. Fix this by using
atomic_xchg.

This provides a different fix for the problem which commit 15124e14
attempts to deal with. That commit breaks use of ^C to drop into gdb,
and so this approach is better (and 15124e14 can be reverted).
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
[PMM: commit message tweak]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

(cherry picked from commit 817ef04d)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

commit 57f97834 cleaned up
the cac_applet_pki_process_apdu function to have a single
exit point. Unfortunately, that commit introduced a bug
where the sign buffer can get free'd and nullified while
it's still being used.

This commit corrects the bug by introducing a boolean to
track whether or not the sign buffer should be freed in
the function exit path.
Signed-off-by: NRay Strode <rstrode@redhat.com>
Reviewed-by: NAlon Levy <alon@pobox.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 81b49e8f)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

While writing an L1 table sector, qcow2_write_l1_entry() copies the
respective range from s->l1_table to the local "buf" array. The size of
s->l1_table does not have to be a multiple of L1_ENTRIES_PER_SECTOR;
thus, limit the index which is used for copying all entries to the L1
size.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NPeter Lieven <pl@kamp.de>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
(cherry picked from commit a1391444)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Add verification to vmsvga_fill_rect, re-enable HW_FILL_ACCEL.

Cc: qemu-stable@nongnu.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDon Koch <dkoch@verizon.com>
(cherry picked from commit bd9ccd85)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Add verification to vmsvga_copy_rect, re-enable HW_RECT_ACCEL.

Cc: qemu-stable@nongnu.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDon Koch <dkoch@verizon.com>
(cherry picked from commit 61b41b4c)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Switch vmsvga_update_rect over to use vmsvga_verify_rect.  Slight change
in behavior:  We don't try to automatically fixup rectangles any more.
In case we find invalid update requests we'll do a full-screen update
instead.

Cc: qemu-stable@nongnu.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDon Koch <dkoch@verizon.com>
(cherry picked from commit 1735fe1e)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Add verification function for rectangles, returning
true if verification passes and false otherwise.

Cc: qemu-stable@nongnu.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDon Koch <dkoch@verizon.com>
(cherry picked from commit 07258900)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Quick & easy stopgap for CVE-2014-3689:  We just compile out the
hardware acceleration functions which lack sanity checks.  Thankfully
we have capability bits for them (SVGA_CAP_RECT_COPY and
SVGA_CAP_RECT_FILL), so guests should deal just fine, in theory.

Subsequent patches will add the missing checks and re-enable the
hardware acceleration emulation.

Cc: qemu-stable@nongnu.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDon Koch <dkoch@verizon.com>
(cherry picked from commit 83afa38e)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

We used to be able to address both the QEMU and the KVM APIC via "apic".
This doesn't work anymore. So we need to use their parent class to turn
off the vapic on machines that should not expose them.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

(cherry picked from commit df1fd4b5)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is
dropped again when the property is deleted.

The upshot of this is that we always have a refcount >= 1. Upon
unplug the virtio-9p child is not finalized!

Drop our reference after the child property has been added to the
parent.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 8f3d60e5)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

virtio-9p-pci all duplicate the qdev properties of their
V9fsState child. This approach does not work well with
string or pointer properties since we must be careful
about leaking or double-freeing them.

Use the QOM alias property to forward property accesses to the
V9fsState child.  This way no duplication is necessary.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 48833071)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.

The upshot of this is that we always have a refcount >= 1.  Upon hot
unplug the virtio-balloon child is not finalized!

Drop our reference after the child property has been added to the
parent.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 91ba2120)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.

The upshot of this is that we always have a refcount >= 1.  Upon hot
unplug the virtio-rng child is not finalized!

Drop our reference after the child property has been added to the
parent.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 352fa88d)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

virtio-rng-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIORNG child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.

Use the QOM alias property to forward property accesses to the
VirtIORNG child.  This way no duplication is necessary.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 8ee486ae)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.

The upshot of this is that we always have a refcount >= 1.  Upon hot
unplug the virtio-serial child is not finalized!

Drop our reference after the child property has been added to the
parent.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e77ca8b9)
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>