Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds a mmio bar to the qemu standard vga which allows to
access the standard vga registers and bochs dispi interface registers
via mmio.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This broke when the tests were moved from tests/ to tests/tcg/.

On x86_64 host/i386-linux-user non-kvm guest, test-i386 and test-mmap are broken, but at least they build.

To build/run the tests:
$ cd $BUILD_PATH/tests/tcg
$ SRC_PATH=path/to/qemu make <target>
Signed-off-by: NCatalin Patulea <catalinp@google.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

There's no reason to require configure to run before running a clean
target, so check MAKECMDGOALS before.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

commit c28ae41e introduced GETPC() usage for sparc, which is currently
not defined when building with --enable-tcg-interpreter. Add sparc to
the list of targets we selectively define GETPC() for.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Switch to my new work email address from which I am contributing.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We need to evaluate $libexecdir in configure, otherwise we literally end
up with "${prefix}/libexec" instead of the absolute path as
CONFIG_QEMU_HELPERDIR.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Update the -help output and documentation so that it recommends
'help' rather than '?' for the various "list valid values for this
option" cases. '?' is deprecated (as it can fail confusingly if
not quoted), so it's better to steer users towards 'help'. ('?'
still works, for backwards compatibility.)

This is the -help option part of the change otherwise done in
commit c8057f95, since we are now past release 1.2 and free to
change our help text without worrying about breaking libvirt.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

* 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu:
  linux-user: register align p{read, write}64
  linux-user: ppc: mark as long long aligned
  tcg: Remove TCG_TARGET_HAS_GUEST_BASE define
  configure: Remove unnecessary host_guest_base code
  linux-user: If loading fails, print error as string, not number
  linux-user: Fix siginfo handling
  alpha-linux-user: Fix sigaltstack structure definition
  linux-user: Implement gethostname
  linux-user: Perform more checks on iovec lists
  linux-user: fix multi-threaded /proc/self/maps
  linux-user: fix statfs

* 'trivial-patches' of git://github.com/stefanha/qemu:
  ui/vnc-jobs.c: Fix minor typos in comments
  net/tap-win32: Fix compiler warning caused by missing include statement
  configure: Remove unused parameters from main function
  target-arm/neon_helper: Remove obsolete FIXME comment
  targphys.h: Don't define target_phys_addr_t for user-mode emulators
  ui/vnc: Only report/use TIGHT_PNG encoding if enabled.

Fixes a clone() emulation bug were the new thread starts
at the point of the syscall and thus clones in a loop.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Fix some minor typos/grammar errors in comments.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The include file for net_init_tap was missing:

net/tap-win32.c:703:
 warning: no previous prototype for ‘net_init_tap’
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This modification is required if compiler option -Wunused-parameter is activated.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Commit 33ebc293 fixed the bugs in the implementation of VQRSHL,
but forgot to remove the FIXME comment...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Commit 4be403c8 accidentally defined the target_phys_addr_t type when
building user-mode emulators. Since the type doesn't really make
any sense except for system emulators, avoid defining it when building
in user mode.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If TIGHT_PNG is not enabled by the --enable-vnc-png configure flag
then do not report to the client that it is supported.

Also, since TIGHT_PNG is the same as the TIGHT encoding but with the
filter/copy replaced with PNG data, adding it to the supported
encodings list when it is disabled will cause the TIGHT encoding to be
used even though the client requested TIGHT_PNG.
Signed-off-by: NJoel Martin <github@martintribe.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Instructions that both use the RRX second operand and update CS were
incorrect, as the Carry flag was updated too early. An example of such an
instruction would be:

ands r12,r13,RRX

Ands, because of the "s" flag will update the carry flag. But the RRX second
operand rotates through the C flag which should happen before the update.
Fixed the ordering of the two, the old carry is read by "r13,RRX" before being
updated.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reported-by: NVinesh Peringat <vineshp@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Like add2, do operand ordering, constant folding, and dead operand
elimination.  The latter happens about 15% of all mulu2 during an
x86_64 bios boot.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When x86_64 guest is not in 64-bit mode, the high-part of the 64-bit
add is dead.  When the host is 32-bit, we can simplify to 32-bit
arithmetic.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We can re-use these for implementing double-word folding.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This saves a whole lot of repetitive code sequences.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reduces code duplication and prefers

  movcond d, c1, c2, const, s
to
  movcond d, c1, c2, s, const

It also prefers

  add r, r, c
over
  add r, c, r

when both inputs are known constants.  This doesn't matter for true add, as
we will fully constant fold that.  But it matters for a follow-on patch using
this routine for add2 which may not be fully foldable.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Needed for moving halted field to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Needed for changing mips_vpe_sleep() argument type to MIPSCPU.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Needed for moving halted field to CPUState.
The variable name "c" is retained for MIPSCPU to leave "cpu" for CPUState.

Also change return type to bool while at it.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Needed for changing mips_vpe_is_wfi() argument type to MIPSCPU.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Free the variable name "other_cpu" for later use for MIPSCPU.

Fix off-by-one indentation while at it.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Note that in the general reg=reg,reg case we're restricted
to 16-bit insertions.  This makes it easy to allow "any"
constant as input, as post-truncation it will fit into the
constant load insn for which we have room in the bundle.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

It is possible to slightly optimize the TLB access code, by replacing
the movi + and instructions by a deposit instruction.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Remove suboptimal register shifting in qemu_ld/st ops, introduced at the
CONFIG_TCG_PASS_AREG0 time.

As mem_idx is now loaded in register R58/R59 for the slow path, we have
to make sure to do it last, to not add additional register constraints.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Implement movcond_i32/64 on ia64 hosts. It is not possible to have
immediate compare arguments without adding a new bundle, but it is
possible to have 22-bit immediate value arguments.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>