The if block detecting OMAP/StrongARM modifies the id_cp_reginfo
.access fields in place. So there is no need to replicate the call
to define_arm_cp_reg(). Dropped, and let the OMAP case fall through
to the normal behaviour after the in-place modification.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 72aae9b8ebbc9a76d2b06faf8666ef8a4b34b92a.1373429432.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The ARMv8 SEVL instruction is in the architectural hint space already
emulated as nop.  This makes the decoding of SEVL explicit for clarity.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Message-id: 1370606786-5650-3-git-send-email-mans@mansr.com
[PMM: added 'SEVL' to the TODO comment]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This adds support for the ARMv8 load acquire/store release instructions.
Since qemu does nothing special for memory barriers, these can be
emulated like their non-acquire/release counterparts.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMans Rullgard <mans@mansr.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Setting it to LE forces a byte swap when host != guest endian but
this makes no sense at all.

Herve made the suggestion upon observing that word writes/reads
were broken into byte writes/reads in such a way as to assume
devices are interpret registers as LE.

However, even if this were a problem, marking the region as LE is
not useful because what's essentially happening here is that LE is
open coded.  So by marking it LE in MemoryRegionOps, we're doing a
superflous swap.

Now, the portio code is suspicious to begin with.  The dispatch
layer really has no purpose in splitting I/O requests in the first
place...

Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: Alex Graf <agraf@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Alexander Graf (16) and others
# Via Alexander Graf
* agraf/ppc-for-upstream: (22 commits)
  PPC: dbdma: Support more multi-issue DMA requests
  PPC: Add timer handler for newworld mac-io
  PPC: dbdma: Support unaligned DMA access
  PPC: dbdma: Wait for DMA until we have data
  PPC: dbdma: Move processing to io
  PPC: dbdma: macio: Add DMA callback
  PPC: dbdma: Move static bh variable to device struct
  PPC: dbdma: Introduce kick function
  PPC: dbdma: Move defines into header file
  PPC: dbdma: Allow new commands in RUN state
  PPC: dbdma: Fix debug print
  PPC: Mac: Add debug prints in macio and dbdma code
  PPC: dbdma: Replace tabs with spaces
  PPC: Macio: Replace tabs with spaces
  PPC: g3beige: Move secondary IDE bus to mac-io
  PPC: Mac: Fix guest exported tbfreq values
  target-ppc: Add POWER8 v1.0 CPU model
  pseries: move interrupt controllers to hw/intc/
  spapr: Respect -bios command line option for SLOF
  spapr: Use named enum for function remove_hpte
  ...

Message-id: 1373562085-29728-1-git-send-email-agraf@suse.de
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A DMA request can happen for data that hasn't been completely been
provided by the IDE core yet. For example

  - DBDMA request for 0x1000 bytes
  - IDE request for 1 sector
  - DBDMA wants to read 0x1000 bytes (8 sectors) from bdrv
  - breakage

Instead, we should truncate our bdrv request to the maximum number
of sectors we're allowed to read at that given time. Once that transfer
is through, we will fall into our recently introduced waiting logic.

  - DBDMA requests for 0x1000 bytes
  - IDE request for 1 sector
  - DBDMA wants to read MIN(0x1000, 1 * 512) bytes
  - DBDMA finishes reading, indicates to IDE core that transfer is complete
  - IDE request for 7 sectors
  - DBDMA finishes the DMA
Reported-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Mac OS X accesses fancy timer registers inside of the mac-io on bootup.

These really should be ticking at the mac-io bus frequency, but I don't
see anyone upset when we just make them as fast as we want to.

With this patch on top of my previous patch queue and latest OpenBIOS
I am able to boot Mac OS X 10.4 with -M mac99.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The DBDMA engine really just reads bytes from a producing device (IDE
in our case) and shoves these bytes into memory. It doesn't care whether
any alignment takes place or not.

Our code today however assumes that block accesses always happen on
sector (512 byte) boundaries. This is a fair assumption for most cases.

However, Mac OS X really likes to do unaligned, incomplete accesses
that it finishes with the next DMA request.

So we need to read / write the unaligned bits independent of the actual
asynchronous request, because that one can only handle 512-byte-aligned
data. We also need to cache these unaligned sectors until the next DMA
request, at which point the data might be successfully flushed from the
pipe.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We should only start processing DMA requests when we have data to process.
Hold off working through the DMA shuffling until the IDE core told us that
it's ready.

This is required because the guest can program the DMA engine or the IDE
transfer first. Both are legal.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Soon we will introduce intermediate processing pauses which will
allow the bottom half to restart a DMA request that couldn't be
fulfilled yet.

For that to work, move the processing variable into the io struct
which is what DMA providers work with.

While touching it, also change it into a bool
Signed-off-by: NAlexander Graf <agraf@suse.de>

We need to know when the IDE core starts a DMA transfer. Add a notifier
function so we have the chance to start transmitting data.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The DBDMA controller has a bottom half to asynchronously process DMA
request queues.

This bh was stored as a gross static variable. Move it into the device
struct instead.

While at it, move all users of it to the new generic kick function.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The DBDMA engine really is running all the time, waiting for input. However
we don't want to waste cycles constantly polling.

So introduce a kick function that data providers can call to notify the
DBDMA controller of new input.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We usually keep struct and constant definitions in header files. Move
them there to stay consistent and to make access to fields easier.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The DBDMA controller can not change its command stream while it's
actively streaming data, true. But the fact that it's in RUN state
doesn't actually indicate anything. It could just as well be in
WAIT while in RUN. And then it's legal to change commands.

This fixes a real world issue I've encountered with Mac OS X.
Signed-off-by: NAlexander Graf <agraf@suse.de>

There was a debug print that didn't compile for me because the format
and the arguments weren't in sync. Fix it up.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The macio code is basically undebuggable as it stands today, with no
debug prints anywhere whatsoever. DBDMA was better, but I needed a
few more to create reasonable logs that tell me where breakage is.

Add a DPRINTF macro in the macio source file and add a bunch of debug
prints that are all disabled by default of course.
Signed-off-by: NAlexander Graf <agraf@suse.de>

s/^I/        /g on the file with a few manual tweaks to align things.
Signed-off-by: NAlexander Graf <agraf@suse.de>

s/^I/        /g on the file.
Signed-off-by: NAlexander Graf <agraf@suse.de>

On a real G3 Beige the secondary IDE bus lives on the mac-io chip, not
on some random PCI device. Move it there to become more compatible.

While at it, also clean up the IDE channel connection logic.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We can tell the guest the frequency of its time base through fwcfg.

However, we tell it a different value from the speed tb actually runs
at. Let's fix it and make the tbfreq initialization and the fwcfg exposure
use the same values.
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch adds CPU PVR definition for POWER8,
and enables QEMU to launch guests on POWER8 hardware.
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NPaul Mackerras <paulus@samba.org>
Reviewed-by: NAndreas Farber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Allow the user to override the firmware file name rather than always
using "slof.bin".
Reported-by: NDinar Valeev <k0da@opensuse.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The function returned a target_ulong which was made from unnamed enum
values. The target_ulong was then assigned to an int variable which
was used in a switch statement.

Using a named enum in both cases makes reviews easier.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

i686-w64-mingw32-gcc (GCC) 4.6.3 from Debian wheezy reports these warnings:

hw/ppc/spapr_hcall.c:188:1: warning:
 control reaches end of non-void function [-Wreturn-type]

hw/ppc/spapr_pci.c:454:1: warning:
 control reaches end of non-void function [-Wreturn-type]

Both warnings are fixed by using g_assert_not_reached instead of assert.
A second line with assert(0) in spapr_pci.c which did not raise a compiler
warning was modified, too, because g_assert_not_reached documents the
purpose of that statement and is not removed in release builds.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

MPC86xx processors are based on the e600 core, which is not the case
in qemu where it is based on the 7400 processor.

This patch creates the e600 core and instantiates the MPC86xx
processors based on it. Therefore, adding the high BATs, the SPRG
4..7 registers, which are e600-specific [1], and a HW MMU model (as 7400).
This allows to define the MPC8610 processor too.

Tested with a kernel using the HW TLB misses.

[1] http://cache.freescale.com/files/32bit/doc/ref_manual/E600CORERM.pdfSigned-off-by: NJulio Guerra <guerr@julio.in>
Signed-off-by: NAlexander Graf <agraf@suse.de>

# By Kevin Wolf (4) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
  add timestamp to error_report()
  qapi-schema: Use existing type for drive-backup arguments
  qapi-schema: Use BlockdevSnapshot type for blockdev-snapshot-sync
  qapi.py: Allow top-level type reference for command definitions
  qapi.py: Avoid code duplication
  qemu-char: Fix ringbuf option size

Message-id: 1373478767-20965-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.

In this case, we often need to know when the problem happens.

But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.

[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().
Signed-off-by: NSeiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This removes duplicated definitions and documentation by reusing the
existing data type.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

We don't have to duplicate the definition any more now that we may refer
to a type instead.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

If 'data' for a command definition isn't a dict, but a string, it is
taken as a (struct) type name and the fields of this struct are directly
used as parameters.

This is useful for transactionable commands that can use the same type
definition for both the transaction action and the arguments of the
standalone command.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The code that interprets the read JSON expression and appends types to
the respective global variables was duplicated. We can avoid that by
splitting off the part that reads from the file.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Any attempt to use it trips an "opt->desc->type == QEMU_OPT_NUMBER"
assertion.  Broken in commit 1da48c65.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

QOM CPUState refactorings

* Fix for OpenRISCCPU subclasses
* Fix for gdbstub CPU selection
* Move linux-user CPU functions into new header
* CPUState part 10 refactoring: first_cpu, next_cpu, cpu_single_env et al.
* Fix some targets to consistently inline TCG code generation
* Centrally log CPU reset

# gpg: Signature made Wed 10 Jul 2013 07:52:39 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (41) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony: (43 commits)
  cpu: Move reset logging to CPUState
  target-ppc: Change LOG_MMU_STATE() argument to CPUState
  target-i386: Change LOG_PCALL_STATE() argument to CPUState
  log: Change log_cpu_state[_mask]() argument to CPUState
  target-i386: Change do_smm_enter() argument to X86CPU
  target-i386: Change do_interrupt_all() argument to X86CPU
  target-xtensa: Change gen_intermediate_code_internal() arg to XtensaCPU
  target-unicore32: Change gen_intermediate_code_internal() signature
  target-sparc: Change gen_intermediate_code_internal() argument to SPARCCPU
  target-sh4: Change gen_intermediate_code_internal() argument to SuperHCPU
  target-s390x: Change gen_intermediate_code_internal() argument to S390CPU
  target-ppc: Change gen_intermediate_code_internal() argument to PowerPCCPU
  target-mips: Change gen_intermediate_code_internal() argument to MIPSCPU
  target-microblaze: Change gen_intermediate_code_internal() argument types
  target-m68k: Change gen_intermediate_code_internal() argument to M68kCPU
  target-lm32: Change gen_intermediate_code_internal() argument to LM32CPU
  target-i386: Change gen_intermediate_code_internal() argument to X86CPU
  target-cris: Change gen_intermediate_code_internal() argument to CRISCPU
  target-arm: Change gen_intermediate_code_internal() argument to ARMCPU
  target-alpha: Change gen_intermediate_code_internal() argument to AlphaCPU
  ...

# By Andreas Schwab (2) and others
# Via Riku Voipio
* riku/linux-user-for-upstream:
  linux-user: Do not ignore mmap failure from host
  linux-user: improve target_to_host_sock_type conversion
  user-exec.c: Set is_write correctly in the ARM cpu_signal_handler()
  linux-user: Fix sys_utimensat (would not compile on old glibc)
  linux-user: fix signal number range check
  linux-user: add SIOCADDRT/SIOCDELRT support
  linux-user: handle /proc/$$ like /proc/self

Message-id: cover.1373051589.git.riku.voipio@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Richard Henderson
# Via Richard Henderson
* rth/tcg-next:
  tcg-arm: Implement tcg_register_jit
  tcg-i386: Use QEMU_BUILD_BUG_ON instead of assert for frame size
  tcg: Move the CIE and FDE header definitions to common code
  tcg: Fix high_pc fields in .debug_info
  tcg-arm: Use AT_PLATFORM to detect the host ISA
  tcg-arm: Simplify logic in detecting the ARM ISA in use
  tcg-arm: Rename use_armv5_instructions to use_armvt5_instructions
  tcg-arm: Make use of conditional availability of opcodes for divide
  tcg: Simplify logic using TCG_OPF_NOT_PRESENT
  tcg: Allow non-constant control macros
  tcg-ppc64: Don't implement rem
  tcg-ppc: Don't implement rem
  tcg-arm: Don't implement rem
  tcg: Split rem requirement from div requirement
  tcg: Add myself to general TCG maintainership

Message-id: 1373379515-28596-1-git-send-email-rth@twiddle.net
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Its clear from the implementation that class casting is supposed to work
with a NULL class argument. Guard all dereferences of the class argument
against NULL accordingly.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 94cd5ba46b74eea289a7e582635820c1c54e66fa.1371546907.git.peter.crosthwaite@xilinx.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

x86 was using additional CPU_DUMP_* flags, so make that configurable in
CPUClass::reset_dump_flags.

This adds reset logging for alpha, unicore32 and xtensa.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>