- 28 2月, 2017 4 次提交
-
-
由 Thomas Huth 提交于
The "qemu,register" device needs to be wired up in source code, there is no way the user can make any real use of this device with the "-device" parameter or the "device_add" monitor command yet. Signed-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Thomas Huth 提交于
The "or-irq" device needs to be wired up in source code, there is no way the user can make any real use of this device with the "-device" parameter or the "device_add" monitor command yet. Signed-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Peter Maydell 提交于
In float64_to_uint64_round_to_zero() a typo meant that we were taking the uint64_t return value from float64_to_uint64() and putting it into an int64_t variable before returning it as uint64_t again. Use uint64_t instead of pointlessly casting it back and forth to int64_t. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NLaurent Vivier <laurent@vivier.eu> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Stefan Weil 提交于
Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 27 2月, 2017 8 次提交
-
-
由 Peter Maydell 提交于
Merge qcrypto 2017/02/27 v1 # gpg: Signature made Mon 27 Feb 2017 13:37:34 GMT # gpg: using RSA key 0xBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/pull-qcrypto-2017-02-27-1: crypto: assert cipher algorithm is always valid crypto: fix leak in ivgen essiv init Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Prasad J Pandit 提交于
Crypto routines 'qcrypto_cipher_get_block_len' and 'qcrypto_cipher_get_key_len' return non-zero cipher block and key lengths from static arrays 'alg_block_len[]' and 'alg_key_len[]' respectively. Returning 'zero(0)' value from either of them would likely lead to an error condition. Signed-off-by: NPrasad J Pandit <pjp@fedoraproject.org> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Li Qiang 提交于
On error path, the 'salt' doesn't been freed thus leading a memory leak. This patch avoid this. Signed-off-by: NLi Qiang <liqiang6-s@360.cn> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Paolo Bonzini 提交于
nodes[id].next is written by other threads. If atomic_read is not used (matching atomic_set in mcs_mutex_lock!) the compiler can optimize the whole "if" away! Reported-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Tested-by: NGreg Kurz <groug@kaod.org> Message-id: 20170227111726.9237-1-pbonzini@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Pull request for Niagara patches 2017 02 26 # gpg: Signature made Sun 26 Feb 2017 21:56:06 GMT # gpg: using RSA key 0x3360C3F7411A125F # gpg: Good signature from "Artyom Tarasenko <atar4qemu@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 2AD8 6149 17F4 B2D7 05C0 BB12 3360 C3F7 411A 125F * remotes/artyom/tags/pull-sun4v-20170226: niagara: check if a serial port is available niagara: fail if a firmware file is missing Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Artyom Tarasenko 提交于
Reported-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
-
由 Artyom Tarasenko 提交于
fail if a firmware file is missing and not qtest_enabled(), the later is necessary to allow some basic tests if firmware is not available Suggested-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
-
由 Peter Maydell 提交于
slirp updates # gpg: Signature made Sun 26 Feb 2017 14:40:00 GMT # gpg: using RSA key 0xB0A51BF58C9179C5 # gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" # gpg: aka "Samuel Thibault <sthibault@debian.org>" # gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>" # gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" # gpg: aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6 # Subkey fingerprint: AEBF 7448 FAB9 453A 4552 390E B0A5 1BF5 8C91 79C5 * remotes/thibault/tags/samuel-thibault: slirp: tcp_listen(): Don't try to close() an fd we never opened slirp: Convert mbufs to use g_malloc() and g_free() slirp: Check qemu_socket() return value in udp_listen() Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 26 2月, 2017 9 次提交
-
-
由 Peter Maydell 提交于
Coverity points out (CID 1005725) that an error-exit path in tcp_listen() will try to close(s) even if the reason it got there was that the qemu_socket() failed and s was never opened. Not only that, this isn't even the right function to use, because we need closesocket() to do the right thing on Windows. Change to using the right function and only calling it if needed. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
-
由 Peter Maydell 提交于
The mbuf code currently doesn't check the result of doing a malloc() or realloc() of its data (spotted by Coverity, CID 1238946). Since the m_inc() API assumes that extending an mbuf must succeed, just convert to g_malloc() and g_free(). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
-
由 Peter Maydell 提交于
Check the return value from qemu_socket() rather than trying to pass it to bind() as an fd argument even if it's negative. This wouldn't have caused any negative consequences, because it won't be a valid fd number and the bind call will fail; but Coverity complains (CID 1005723). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
-
由 Peter Maydell 提交于
Block layer patches # gpg: Signature made Fri 24 Feb 2017 18:08:26 GMT # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: tests: Use opened block node for block job tests vvfat: Use opened node as backing file block: Add bdrv_new_open_driver() block: Factor out bdrv_open_driver() block: Use BlockBackend for image probing block: Factor out bdrv_open_child_bs() block: Attach bs->file only during .bdrv_open() block: Pass BdrvChild to bdrv_truncate() mirror: Resize active commit base in mirror_run() qcow2: Use BB for resizing in qcow2_amend_options() blockdev: Use BlockBackend to resize in qmp_block_resize() iotests: Fix another race in 030 qemu-img: Improve documentation for PREALLOC_MODE_FALLOC qemu-img: Truncate before full preallocation qemu-img: Add tests for raw image preallocation qemu-img: Do not truncate before preallocation qemu-iotests: redirect nbd server stdout to /dev/null qemu-iotests: add ability to exclude certain protocols from tests qemu-iotests: Test 137 only supports 'file' protocol Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
# gpg: Signature made Fri 24 Feb 2017 17:45:53 GMT # gpg: using RSA key 0xBDBE7B27C0DE3057 # gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>" # gpg: aka "Jeffrey Cody <jeff@codyprime.org>" # gpg: aka "Jeffrey Cody <codyprime@gmail.com>" # Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057 * remotes/cody/tags/block-pull-request: RBD: Add support readv,writev for rbd block/nfs: try to avoid the bounce buffer in pwritev block/nfs: convert to preadv / pwritev Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
MIPS patches 2017-02-24-2 CHanges: * Add the Boston board with fixing the make check issue on 32-bit hosts. # gpg: Signature made Fri 24 Feb 2017 11:43:45 GMT # gpg: using RSA key 0x2238EB86D5F797C2 # gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2 * remotes/yongbok/tags/mips-20170224-2: hw/mips: MIPS Boston board support Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
This is the MTTCG pull-request as posted yesterday. # gpg: Signature made Fri 24 Feb 2017 11:17:51 GMT # gpg: using RSA key 0xFBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-mttcg-240217-1: (24 commits) tcg: enable MTTCG by default for ARM on x86 hosts hw/misc/imx6_src: defer clearing of SRC_SCR reset bits target-arm: ensure all cross vCPUs TLB flushes complete target-arm: don't generate WFE/YIELD calls for MTTCG target-arm/powerctl: defer cpu reset work to CPU context cputlb: introduce tlb_flush_*_all_cpus[_synced] cputlb: atomically update tlb fields used by tlb_reset_dirty cputlb: add tlb_flush_by_mmuidx async routines cputlb and arm/sparc targets: convert mmuidx flushes from varg to bitmap cputlb: introduce tlb_flush_* async work. cputlb: tweak qemu_ram_addr_from_host_nofail reporting cputlb: add assert_cpu_is_self checks tcg: handle EXCP_ATOMIC exception for system emulation tcg: enable thread-per-vCPU tcg: enable tb_lock() for SoftMMU tcg: remove global exit_request tcg: drop global lock during TCG code execution tcg: rename tcg_current_cpu to tcg_current_rr_cpu tcg: add kick timer for single-threaded vCPU emulation tcg: add options for enabling MTTCG ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
A selection of s390x patches: - cleanups, fixes and improvements - program check loop detection (useful with the corresponding kernel patch) - wire up virtio-crypto for ccw - and finally support many virtqueues for virtio-ccw # gpg: Signature made Fri 24 Feb 2017 09:19:19 GMT # gpg: using RSA key 0xDECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20170224: s390x/css: handle format-0 TIC CCW correctly s390x/arch_dump: pass cpuid into notes sections s390x/arch_dump: use proper note name and note size virtio-ccw: support VIRTIO_QUEUE_MAX virtqueues s390x: bump ADAPTER_ROUTES_MAX_GSI virtio-ccw: check flic->adapter_routes_max_batch s390x: add property adapter_routes_max_batch virtio-ccw: Check the number of vqs in CCW_CMD_SET_IND virtio-ccw: add virtio-crypto-ccw device virtio-ccw: handle virtio 1 only devices s390x/flic: fail migration on source already s390x/kvm: detect some program check loops s390x/s390-virtio: get rid of DPRINTF Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Docker testing and shippable patches Hi Peter, These are testing and build automation patches: - Shippable.com powered CI config - Docker cross build - Fixes and MAINTAINERS tweaks. # gpg: Signature made Fri 24 Feb 2017 06:31:10 GMT # gpg: using RSA key 0xCA35624C6A9171C6 # gpg: Good signature from "Fam Zheng <famz@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6 * remotes/famz/tags/for-upstream: docker: Install python2 explicitly in docker image MAINTAINERS: merge Build and test automation with Docker tests .shippable.yml: new CI provider new: debian docker targets for cross-compiling tests/docker: add basic user mapping support Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 25 2月, 2017 5 次提交
-
-
由 Peter Maydell 提交于
option cutils: Fix and clean up number conversions # gpg: Signature made Thu 23 Feb 2017 19:41:17 GMT # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-util-2017-02-23: (24 commits) option: Fix checking of sizes for overflow and trailing crap util/cutils: Change qemu_strtosz*() from int64_t to uint64_t util/cutils: Return qemu_strtosz*() error and value separately util/cutils: Let qemu_strtosz*() optionally reject trailing crap qemu-img: Wrap cvtnum() around qemu_strtosz() test-cutils: Drop suffix from test_qemu_strtosz_simple() test-cutils: Use qemu_strtosz() more often util/cutils: Drop QEMU_STRTOSZ_DEFSUFFIX_* macros util/cutils: New qemu_strtosz() util/cutils: Rename qemu_strtosz() to qemu_strtosz_MiB() util/cutils: New qemu_strtosz_metric() test-cutils: Cover qemu_strtosz() around range limits test-cutils: Cover qemu_strtosz() with trailing crap test-cutils: Cover qemu_strtosz() invalid input test-cutils: Add missing qemu_strtosz()... endptr checks option: Fix to reject invalid and overflowing numbers util/cutils: Clean up control flow around qemu_strtol() a bit util/cutils: Clean up variable names around qemu_strtol() util/cutils: Rename qemu_strtoll(), qemu_strtoull() util/cutils: Rewrite documentation of qemu_strtol() & friends ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 tianqing 提交于
Rbd can do readv and writev directly, so wo do not need to transform iov to buf or vice versa any more. Signed-off-by: Ntianqing <tianqing@unitedstack.com> Reviewed-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NJeff Cody <jcody@redhat.com>
-
由 Peter Lieven 提交于
if the passed qiov contains exactly one iov we can pass the buffer directly. Signed-off-by: NPeter Lieven <pl@kamp.de> Reviewed-by: NJeff Cody <jcody@redhat.com> Message-id: 1487349541-10201-3-git-send-email-pl@kamp.de Signed-off-by: NJeff Cody <jcody@redhat.com>
-
由 Peter Lieven 提交于
Signed-off-by: NPeter Lieven <pl@kamp.de> Reviewed-by: NJeff Cody <jcody@redhat.com> Message-id: 1487349541-10201-2-git-send-email-pl@kamp.de Signed-off-by: NJeff Cody <jcody@redhat.com>
-
由 Peter Maydell 提交于
VFIO updates 2017-02-23 - Report qdev_unplug errors (Alex Williamson) - Fix ecap ID 0 handling, improve comment (Alex Williamson) - Disable IGD stolen memory in UPT mode too (Xiong Zhang) # gpg: Signature made Thu 23 Feb 2017 19:04:17 GMT # gpg: using RSA key 0x239B9B6E3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" # gpg: aka "Alex Williamson <alex@shazbot.org>" # gpg: aka "Alex Williamson <alwillia@redhat.com>" # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * remotes/awilliam/tags/vfio-updates-20170223.0: vfio/pci-quirks.c: Disable stolen memory for igd VFIO vfio/pci: Improve extended capability comments, skip masked caps vfio/pci: Report errors from qdev_unplug() via device request Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 24 2月, 2017 14 次提交
-
-
由 Kevin Wolf 提交于
blk_insert_bs() and block job related functions will soon require an opened block node (permission calculations will involve the block driver), so let our tests be consistent with the real users in this respect. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
We should not try to assign a not yet opened node as the backing file, because as soon as the permission system is added it will fail. The just added bdrv_new_open_driver() function is the right tool to open a file with an internal driver, use it. In case anyone wonders whether that magic fake backing file to trigger a special action on 'commit' actually works today: No, not for me. One reason is that we've been adding a raw format driver on top for several years now and raw doesn't support commit. Other reasons include that the backing file isn't writable and the driver doesn't support reopen, and it's also size 0 and the driver doesn't support bdrv_truncate. All of these are easily fixable, but then 'commit' ended up in an infinite loop deep in the vvfat code for me, so I thought I'd best leave it alone. I'm not really sure what it was supposed to do anyway. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
This function allows to create more or less normal BlockDriverStates even for BlockDrivers that aren't globally registered (e.g. helper filters for block jobs). Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
This is a function that doesn't do any option parsing, but just does some basic BlockDriverState setup and calls the .bdrv_open() function of the block driver. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
This fixes the use of a parent-less BdrvChild in bdrv_open_inherit() by converting it into a BlockBackend. Which is exactly what it should be, image probing is an external, standalone user of a node. The requests can't be considered to originate from the format driver node because that one isn't even opened yet. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
This is the part of bdrv_open_child() that opens a BDS with option inheritance, but doesn't attach it as a child to the parent yet. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
The way that attaching bs->file worked was a bit unusual in that it was the only child that would be attached to a node which is not opened yet. Because of this, the block layer couldn't know yet which permissions the driver would eventually need. This patch moves the point where bs->file is attached to the beginning of the individual .bdrv_open() implementations, so drivers already know what they are going to do with the child. This is also more consistent with how driver-specific children work. For a moment, bdrv_open() gets its own BdrvChild to perform image probing, but instead of directly assigning this BdrvChild to the BDS, it becomes a temporary one and the node name is passed as an option to the drivers, so that they can simply use bdrv_open_child() to create another reference for their own use. This duplicated child for (the not opened yet) bs is not the final state, a follow-up patch will change the image probing code to use a BlockBackend, which is completely independent of bs. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
This is more consistent with the commit block job, and it moves the code to a place where we already have the necessary BlockBackends to resize the base image when bdrv_truncate() is changed to require a BdrvChild. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
In order to able to convert bdrv_truncate() to take a BdrvChild and later to correctly check the resize permission here, we need to use a BlockBackend for resizing the image. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
In order to be able to do permission checking and to keep working with the BdrvChild based bdrv_truncate() that this involves, we need to create a temporary BlockBackend to resize the image. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 John Snow 提交于
We can't rely on a non-paused job to be present and running for us. Assume that if the job is not present that it completed already. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Nir Soffer 提交于
Now that we are truncating the file in both PREALLOC_MODE_FULL and PREALLOC_MODE_OFF, not truncating in PREALLOC_MODE_FALLOC looks odd. Add a comment explaining why we do not truncate in this case. Signed-off-by: NNir Soffer <nirsof@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Nir Soffer 提交于
In a previous commit (qemu-img: Do not truncate before preallocation) we moved truncate to the PREALLOC_MODE_OFF branch to avoid slowdown in posix_fallocate(). However this change is not optimal when using PREALLOC_MODE_FULL, since knowing the final size from the beginning could allow the file system driver to do less allocations and possibly avoid fragmentation of the file. Now we truncate also before doing full preallocation. Signed-off-by: NNir Soffer <nirsof@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-